Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2007-06
Add to Favorite Get Latest Update

Press stroke accurate adjustment by graphic method

MEI Bi-zhou GUO Wan-chuan LIU Mao-yin (Technical Center,XuZhou Metal-Forming Machine(Group)co.ltd,XuZhou 221116,China)  
To meet the different requirements of the punching process,the stroke of some presses could be adjusted. The reference list of slide stroke and sleeve position was usually used in practice.Adjusting mechanism of presses might get different slide strokes.The graphic method was introduced.It can quickly get the eccentric sleeve position in a known stroke,and can get the stroke in a known eccentric sleeve position.It is a useful emergency measure without reference.
【CateGory Index】: TG315.4
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 LI Shu-hong,TONG Fang (Guangzhou No.1 Forge Factory Guangzhou, Guangdong 510897, China);Material sizing calculation of crankshaft free forging[J];Forging & Stamping Technology;2005-04
2 CHENG Li(Chongqing Heavy-Duty Casting and Forging Plant,Chongqing 400083,China);Continuous flow line combined forging method of single turn crank[J];Forging & Stamping Technology;2006-01
3 SUN Qian-jiang,WANG Gao-chao,HUANG Ying-xia,Li Ning (School of Materials Science and Engineering, Nanchang Institute of Aeronautical Technology, Nanchang Jiangxi 330034, China);Numerical Simulation of crankshaft in hot forging procedure[J];Forging & Stamping Technology;2006-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wang Chengyun;Wang Chengfa;UNSYMMETRICITY ANALYSIS OF DOUBLE-CRANK-SLIDER MECHANISMS[J];;1994-02
2 Bai wanhe;Liu Qingcai(Dept.of Material Sciece and Engineering)Li Baoyu(Dalian Cap Manufact Factoy);Forming Technology Design on Stamping Tearing-Drawing Caps with 5-Drifts Making Caps Machine[J];JOURNAL OF DALIAN RAILWAY INSTITUTE;1994-01
3 He Wenwu,Zhang Xuezhong,Liu Jiansheng,Guo Huiguang,Lu Zhiyong;Research on the upset forging technology of large full fiber crankshaft[J];Heavy Castings and Forgings;2008-03
4 SONG Zhi-zhen1,LIU Qun-ying2,LIANG Xin-he1,XIA Zhan-xue3(1.School of Material Science and Engineering,Henan University of Science and Technology,Luoyang 471003,China;2.The Measurement and Verification Center,YTO Group Corporation,Luoyang 471004,China;3.Forging Works,First Tractor Company,Limited,Luoyang 471004,China);Design of die forging process for shovel tooth[J];Forging & Stamping Technology;2007-03
5 LIU Xiao-fei SU Juan-hua XU Ying-ying (College of Material Science and Engineering,Heron University of Science and Technology,Luoyang 471003,China);Numerical simulation of two times upsetting and stretching process for squeeze roll by whole forging[J];Forging & Stamping Technology;2007-06
6 ZHANG Qing-ling,SHI Yan-guo,SUN Hui-xue (College of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,China);Technical study on numerical simulation of billet making process of forging Al-alloy wheel hub by swing-rolling technology[J];Forging & Stamping Technology;2008-03
7 ZHANG Guo-xin(Mechatronics Engineering Department,Wuxi College of Science and Technology,Wuxi 214028,China);Optimized design of forging stock for steam turbine blade[J];Forging & Stamping Technology;2008-04
8 ZHANG Xue-yin,SONG Chun-lan(Technical Center,Xuzhou Metalforming Machine Co.,Ltd.,Xuzhou 221116,China);Calculation and analysis of stroke deviation of double-point press[J];Forging & Stamping Technology;2009-04
9 RUAN Wei-ping,HE Shi-zhen,WANG En-fu(Guangdong Metal Forming Machine Works Co.,Ltd.,Foshan 528300,China);Design analysis and application of hydraulic overload protector for press[J];Forging & Stamping Technology;2010-01
10 FANG Ya1,SUN You-song1,SHI Guo-liang1,XIAO Yang1,LI Mian1,LI Shao-pei2,LI Xin-zhong2(1.Facaulty of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China;2.Guangdong Hongxing Machinery Co.,Ltd.,Foshan 528313,China);Analysis of energy consumption and energy-saving approaches for crank presses[J];Forging & Stamping Technology;2010-01
China Proceedings of conference Full-text Database 2 Hits
1 LI Hui ZHANG Ce MENG Xian-ju (School of Mechanical Engineering,Tanjin University,Tanjin 300072,China);Elementary Study on Kinematics Design of Hybrid-Driven Mechanical Press[A];[C];2002
2 LI Hui~1 ZHANG Ce~2 SONG Yi-min~2 (1 Shijiazhuang Institute of Railway Technology,Shijiazhuang 050041, 2 School of Mechanical Engineering,Tianjin University,Tianjin 300072);Design of Slider Curve for the Hybrid-driven Mechanical Press[A];[C];2004
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved