Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2008-01
Add to Favorite Get Latest Update

Technological analysis and drawing die design of complicated tube-shaped shell

WANG Xu-fang(Mechatronics Engineering Department,Hangzhou Vocational and Technical College,Hangzhou 310008,China)  
Drawing and forming die is one of the widely used technologies in stamping,with which various shapes of open hollow parts can be made.Internally acting forces of blank designs are rather complicated during the process of drawing and forming die,so it is difficult to analyze the potential quality problems of complicated parts in this process.Regarding the difficulty that complicated shell bottom can not be formed by one drawing,a solution was found in this paper through technological analysis and adjustment of the die.The structure of drawing and forming die for the auto vacuum booster shell was designed,and the figures were shown for each drawing of the shell center.The products manufactured by the die can fully meet the technical requirements and bring favorable economic benefits.
【CateGory Index】: TG386.32
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 2 Hits
1 ZHAO Xia,LI Fei(Vocational and Technical College,Liaoning University of Petroleum and Chemical Technology,Fushun 113001,China);Stamping process and die design of top head[J];Forging & Stamping Technology;2009-05
2 JI Yu-Jiang,YAO Yan,ZHU Yue-feng (Macheaical and Electrical Engineer College,Kaifeng University,Kaifeng 475004 ,China);Punching process design on defrosting conection of heater unit[J];Forging & Stamping Technology;2009-06
Chinese Journal Full-text Database 10 Hits
1 Liu Yonghao (AISC Technology Centre);Analysis of the Impact Fracture Cause of Al-Plated 08Al Cold Rolled Sheet[J];;1997-06
2 JI Fang;How to Determine the Shaping Techology for Hollow Bottomless Sheet Parts[J];Journal of Anhui Textile Vocational Technical Institute;2002-02
3 Song Lijun;Hu Jiangguo Maanshan Iron & Steel Co. Ltd.;Shaping Process of Inner Locking Ring and Design of the Die[J];Anhui Metallurgy;2002-04
4 Wang Zhiqin;APPLICATION ANALYSIS OF TENSILE PROPERTY IN SHEET FORMING[J];Ordnance Material Science and Engineering;1993-04
5 Gao Zhenli Dou Yunping (Dept. of Mechanical and Electronic Engineering,Beijing 100044);Design of Hydro-forming Machine[J];Journal of Beijing Institute of Civil Engineering and Architecture;2004-02
6 Tisn Yaohua(Yichang Testing Technology Research Institute Hubei, 443003);Application of Explosive Forming Technology to the Processing of a Product[J];EXPLOSIVE MATERIALS;1997-04
7 LI Hui-qin~1,CHEN Gang~2,DING Guo~1,XING Shu-qing~1,CAO Jian-gang~1 (1.Material Science and Engineering School, UST Inner Mongolia, Baotou 014010,China;2.Designing Institute,Baotou Iron and Steel( Group) Company,Baotou 014010,China);The experimental study of wrinking in sheet drawing[J];Journal of Baotou University of Iron and Steel Technology;2004-03
8 Cao Jiangang Xing Shuqing Department of Material Science and Engineering,UIST Baotou,Baotou 014010,China;Stress analysis in design of stamping die[J];JOURNAL OF BAOTOU UNIVERSITY OF IRON AND STEEL TECHNOLOGY;1998-03
9 Yu Wensheng1 Nie Lanqi2(1.Vehicle Engineering Department,Baotou Vocational & Technical College,Baotou Inner Mongolia 014030;2.Shandong Hongqi Electromechanical Ltd.Co.,Weifang Shandong 261031);Protecting and Lubricating Treatment of Stainless Steel under the Deep Drawing[J];Journal of Baotou Vocational & Technical College;2008-04
10 ;汽车发动机盖内板修边冲孔模设计[J];Journal of Chengdu Electromechanical College;2006-02
China Proceedings of conference Full-text Database 5 Hits
1 PENG Cheng-yun,HU Jing-pei( School of Material Science and Engineering, Chongqing Institute of Technology, Chongqing 400050, China; School of Technology, Chongqing Radio and TV University, Chongqing 400050, China);Design of cropper handgrip seats in stamping figuration[A];[C];2005
2 TONG Zheng-guo, TIAN Hao-bin, LEN Jian-ping, L. M. Smith(School of Mechanical Engineering, Tongji University, Shanghai 200092, China; School of Engineering and Computer Science, Oakland University, Rochester, Michigan 48309-4401, U. S. A);Study of formability of TWBs on different thickness[A];[C];2005
3 WU Yong(Inner Mongolia NO.1 Machinery (Group) Co. Ltd., Baotou 014032, Inner Mongolia, China);Stretching processing of low box-type component[A];[C];2005
4 ;中心管冲压工艺及模具设计[A];[C];2007
5 Xu Shengli Gong Xiaotao Wang Bo Li Yan Shi Xin (Xi,an Aeronautical Polytechnic Insititute,Xi,an Shaanxi 710089,China);Forming Limit of Ellipsoid-bottomed Conical Bodies[A];[C];2007
Chinese Journal Full-text Database 4 Hits
1 JIANG Ying-fang1,MENG Ying1,ZHU Yuan-you2(1.School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013,China;2.Department of Mechanical Engineering,Nanjing Institute of Technology,Nanjing 210013,China);Drawing technology and die design of automobile torsion beam part[J];Forging & Stamping Technology;2007-03
2 ZHAO Xia,LI Fei(Vocational and Technical College,Liaoning University of Petroleum & Chemical Technology,Fushun 113001,China);Numerical simulation in the drawing of engine hood exterior panel[J];Forging & Stamping Technology;2007-05
3 ZHANG She-jiu,YANG Xiao-hong(Department of Mechanical Engineering,Guangdong Technical College of Water Resources and Electric Engineering,Guangzhou 510635,China);Composite die for forming electric-automobile brake shield[J];Forging & Stamping Technology;2008-04
4 WANG Yue-zhen1,2,ZHAO Zhen-duo1,LIU Jian-xin2,LI Bin2,LI Feng2(1.School of Materials Science and Engineering,Shandong University,Jinan 250061,China;2.Complete Set Plant,Weichai Power Co.,Ltd.,Weifang 261001,China);Stamping process design of oil filler[J];Forging & Stamping Technology;2008-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved