Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2008-01
Add to Favorite Get Latest Update

Factors considered in designing rotary plate shear carrier

CHEN Man-long(Mechanical Engineer Department,Shanxi University of Technology,Hanzhong 723003,China)  
Generally,the shearing force of rotary plate shearing machine was calculated by the formula of linear motion.The value of shear gap and front and back angles was varied after the blade installation technology had been simplified.It could influence the cutting quality,and damage the blade.So some methods such as compensation for varied gap or improvement for structure should be adopted in design.Formulas to calculate the shearing gap and back and front angles were derived theoretically,and some practical improved methods were given.When all these factors are considered reasonably in the design,the shearing quality of rotary shearing machine will be improved and the possible failures will be decreased.
【CateGory Index】: TG333.21
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 LIU Ying-ying1,WANG Qiang1,YANG Jin-sui2,XU Ji-sheng2(1.School of Mechanical Engineering,University of Jinan,Jinan 250022;2.Jinan Foundry and Metalforming Machinery Research Institute,Jinan 250022,China);Finite Element Analysis of Hydraulic Shears' Tool Carrier Based on ANSYS[J];Modular Machine Tool & Automatic Manufacturing Technique;2009-06
【Citations】
Chinese Journal Full-text Database 6 Hits
1 CHEN Wei 1,2,3 ,LIU Gang 3 ,ZHOU Liu fang 4 (1Armored Force Engineering Institute,Beijing 100072,China;2Jiangsu Fasten CoLtd, Jiangyin Jiangsu 214433,China;3Harbin Institute of Technology ,Harbin Heilongjiang 150001,China; 4North Vehicle Co. Ltd, Beijing 100072,China);Metal plastic contacting deformation contacting strength and its methods of measurement(part 3)[J];Forging & Stamping Technology;2005-01
2 DENG Sheng-ming~(1),ZHANG Wen-yu~(1),HU Bo-tao~(2) (1.Department of Mechanical Technology,Hunan Institute of Technology(prepared to be constructed),Hengyang Hunan 421008,China;2.Hengyang Chemical Machinery Plant,Hengyang Hunan 421002,China);Design of PLC controlling system of cutting plate machine[J];Forging & Stamping Technology;2005-05
3 XU Wei-li~1,BAO Ping~2,AI Jian~1,YU Ning-feng~1(1.R&D Center,Shanghai Baosteel Group Corporation,Shanghai 201900,China;2.Baostell-Nsc/ArcelorAutomotive Steel Sheets Co.,Ltd,Shanghai Baosteel Group Corporation,Shanghai 201900,China);Influence factors of steel sheet stiffness[J];Forging & Stamping Technology;2006-06
4 ZHOU Huan,CHEN Ling ,HU Ji anmin(Jinan2nd Machine Tool Works(Group)Co.,Jinan250022,Shandong Ch ina);Design of Blade Carrier of Plate Rotary Shear[J];;2004-01
5 CHEN Manlong (Shanxi University of Technology Hanzhong 723003, Shanxi China);Method of Blade Adjustment for Hydraulic Rotary Shear[J];China Metal Forming Equipment & Manufacturing Technology;2007-01
6 Zhang Yongxiang;A Study on the Optimum Shearing Clearance of the Shear[J];JOURNAL OF THE NAVAL ACADEMY OF ENGINEERING;1995-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LU Xin-jian1,ZHOU Yong-qing2,SHI Xiong-bing1,MEI Bi-zhou1 (1.Xuzhou Metal Forming Machine(Group) Co.,Ltd.,Xuzhou 221116,China;2.Engineering College,Nanjing Agricultural University,Nanjing 210031,China);Research on worktable stiffness of high-speed punch[J];Forging & Stamping Technology;2008-03
2 ZHOU You-yuan(Department of Mechanical Engineering,Baoji Vocational Technology College,Baoji 721004,China);Analysis of dimension selection for discharge mechanism stripper gate of cylinder shape[J];Forging & Stamping Technology;2008-05
3 ZHEN Zhi-qiang(Xuzhou Metal-forming Machine Group Company,Xuzhou 221116,China);Principle and method in reinforcing dynamic stiffness of high-speed precision press[J];Forging & Stamping Technology;2008-05
4 CHEN Manlong (Shanxi University of Technology Hanzhong 723003, Shanxi China);Method of Blade Adjustment for Hydraulic Rotary Shear[J];China Metal Forming Equipment & Manufacturing Technology;2007-01
5 WANG Xiao-qiang,ZHU Xi,MEI Zhi-yuan,LI Wei(College of Naval Architecture and Power,Naval University of Engineering,Wuhan 430033,China);Experimental Investigation into Anti-penetrating Capacity of Low Alloy Ship Hull Steel Structures to High Velocity Steel Fargment[J];Journal of Materials Engineering;2009-08
6 ZHANG Guanjun,WANG Jing,ZHOU Deyu,WANG Xiuchao(Jiangsu Yawei Machine-tool Co.,Ltd.Jiangdu 225200,Jiangsu China);Issues on the Design of Rolling Guideway in Shear Machine[J];China Metal Forming Equipment & Manufacturing Technology;2009-05
7 XIA Weiming,JI Kuanbin,PAN Shihong(Jiangsu Guoli Forging Machine Tool Co.,Ltd.,Yangzhou 225009,Jiangsu China);Analysis of Lateral Thrust on Main Cylinder Rod of Hydraulic Swing Beam Shear on the Basis of Finite Element Analysis[J];China Metal Forming Equipment & Manufacturing Technology;2009-05
8 LIU Chang-rong,CHEN Fang,LIU Tao,ZHENG Yu-cai,QIN Guo-min(Dept of Mechanics & Electronics,HNUST,Qinhuangdao Hebei,066004,China);Design of a Roller-type Clipper[J];Journal of Hebei Normal University of Science & Technology;2007-02
9 SUN Dong-ming,ZHOU Xiao-ling,XU Ping,DONG Wei-ming(The Faculty of Mechanical and Electrical Engineering,Kunming University of Science and Technology,Kunming 650093,China);Design of the light-duty hydraulic plate shear drived by double hydrocylinders[J];Machinery Design & Manufacture;2006-09
10 CHEN Man-long 1,TENG De-yi 2(1 Shanxi University of Technology,Hanzhong 723003,China)(2 Himin Solar Energy Group Co.,Ltd,Dezhou 253000,China);Abstract calculation of shear force in hydraulic rotary shear design[J];Machinery Design & Manufacture;2008-03
【Co-references】
Chinese Journal Full-text Database 4 Hits
1 YU Ming 1, SHAO Wei-xun1, WANG Biao1, ZHANG Fu-min2, HU Kong-bai2(1. School of Mechanical Engineering ,Anhui University of Technology,Ma'anshan 243002,China; 2. Ma'anshan Iron and Steel Co.Ltd., Ma'anshan 243000, China );Analysis of the stander of oblique edge shear by finite element method[J];Journal of East China University of Metallargy;2002-01
2 CHEN Man-long 1,TENG De-yi 2(1 Shanxi University of Technology,Hanzhong 723003,China)(2 Himin Solar Energy Group Co.,Ltd,Dezhou 253000,China);Abstract calculation of shear force in hydraulic rotary shear design[J];Machinery Design & Manufacture;2008-03
3 WANG Fenghui LU Jianxiat LI Longhai ZHAO Qijie GUO Feit (Anshan University of Science and Technology, Anshan 114002, China) (North China Institute of Water Conservancy and Hydroelectric Power, Zhengzhou 450008, China);THE FINITE ELEMENT ANALYSIS OF THE STRESS AND DEFORMATION OF SHEARS' HOUSINGS[J];Mechanics and Engineering;2003-03
4 LI Guo-ping a, SHAO Hong-yan b, JIN Ming-hua a (a. Faculty of Engineering; b. Faculty of Architectural, Ningbo University Zhejiang Ningbo 315000, china);Stress Analysis and Dimension Optimize of a Special Tool-Post[J];Modular Machine Tool & Automatic Manufacturing Technique;2005-05
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 ZHOU Huan,CHEN Ling ,HU Ji anmin(Jinan2nd Machine Tool Works(Group)Co.,Jinan250022,Shandong Ch ina);Design of Blade Carrier of Plate Rotary Shear[J];;2004-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved