Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2010-01
Add to Favorite Get Latest Update

Numerical simulation on aluminum profile extrusion based on ALE method

WANG Yao,ZHOU Zhao-yao,PAN Jian-yi,LIU Liang,WU Yuan-biao(College of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,China)  
Using the HyperXtrude module based on the Arbitrary Lagrangian-Eulerian(ALE) finite element method,steady-state simulation on the extrusion process of the hollow aluminum profile was presented.The field distributions of velocity,temperature,strain rate and stress of metal flow were obtained,and they were basically consistent with the producing test.It confirms that this method may successfully predict the potential defects occurring in the actual extrusion process and provide the theoretical basis for process parameters selection and die design.
【Fund】: 2006年度广东省教育部产学研结合项目(2006D90304005);; 2008年粤港关键领域重点突破项目(2008Z007)
【CateGory Index】: TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 9 Hits
1 LI Ying;LIU Jiang-wei;ZHAO Guo-qun;Engineering Training Center,Shandong University;Mold & Die Engineering Technology Research Center,Shandong University;;Research on meshing algorithm of aluminum profile extrusion flow model[J];Forging & Stamping Technology;2013-05
2 Zhao Binbin;Tang Hongqun;Zhan Yongzhong;Zhou Wenbiao;Wu Yun;College of Materials Science and Engineering,Guangxi University;Alnan Aluminium Co. ,Ltd.;;Numerical simulation of the extrusion process and optimization of the technological parameters for half-hollow aluminum profile[J];Forging & Stamping Technology;2014-09
3 Zong Rongrong;Hao Qiuhong;Li Junpeng;Wang Jinghai;Cheng Rence;Cheng Renzhai;National Engineering Research Center for Plastic Working of Aluminium Alloys,Shandong Nanshan Aluminum Co. ,Ltd.;Beijing Nanshan Institute of Aeronautical Materials;;Simulation optimization on extrusion speed for extra-wide aluminum profile with thin-walls used for railway vehicles[J];Forging & Stamping Technology;2015-07
4 WANG He-nan,WANG Meng-jun,LIU Chao,QIAO Lei,GE Peng(The Key Laboratory of Nonferrous Metal Materials Science and Engineering of Ministry of Education,Central South University, Changsha 410083,China);Mold Design Optimization of Aluminum Profiles Based on HyperXtrude[J];Aluminium Fabrication;2012-06
5 Xia Ming;Ran Mengchun;Department of Mechanical and Electrical Engineering,Chongqing Vocational Institute of Safety and Technology;;Simulation of Thin-walled Extruded Aluminum Based on HyperXtrude[J];Journal of Hubei University of Automotive Technology;2014-02
6 ZHONG Jianhua;YUAN Zhiyan;LIU Yanxia;LIN Shipeng;School of Material Science and Engineering , Jiangxi University of Science and Technology;;Numerical simulation of effects of extrusion process parameters on extrusion process[J];Nonferrous Metals Science and Engineering;2015-03
7 RAN Meng-chun;XIA Ming;Department of Machinery and Electricity Chongqing Safety Technology Vocational Institute;;Research on simulation and test of extrusion forming of hexagonal aluminum profile with thin wall[J];Light Alloy Fabrication Technology;2014-04
8 Ni Zhengshun,Liu Shibai,He Chang(School of Mechanical Engineering,Hunan University of Technology,Zhuzhou Hunan 412007,China);Numerical Simulation of Aluminum Profile Extrusion Based on HyperXtrude[J];Journal of Hunan University of Technology;2012-02
9 NI Zheng-shun,LIU Shi-bai,TIAN Sheng-li,CHEN You-ming,LUO Yi-bo(School of Mechanical Engineering,Hunan University of Technology,Zhuzhou 412008,China);Numerical Simulation on Aluminum Profile Extrusion Process and Optimization Design of Die[J];Foundry Technology;2012-05
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Zhang Xiong Lu Mingwan Wang Jianjun (Department of Engineering Mechanics, Tsinghua University, Beijing 100084);Research progress in arbitrary Lagrangian Eulerian method[J];CHINESE JOURNAL OF COMPUTATIONAL MECHANICS;1997-01
2 WU Xiang-hongZHAO Guo-qunSUN ShengLOU Shu-meiMA Xin-wu(Engineering Research Center for Die & Mould Technologies,Shandong University,Jinan 250061 China);The influence of extrusion speed and frictional status on Aluminum profile extrusion processes[J];Journal of Plasticity Engineering;2007-01
3 WU Xiang-hong,ZHAO Guo-qun,ZHAO Xin-hai,LUAN Yi-guo,MA Xin-wu(Mold&Die Engineering Technology Research Center,Shandong Univercity,Jinan,250061,China);Research Status and Development of Aluminum Extrusion Process Simulation[J];Journal of System Simulation;2007-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 CHEN Xiangdong1,2,XU Yugong1,LI Zhimin3(1.School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China;2.The Third Railway Survey & Design Institute,Tianjin 300251,China;3.School of Mechanical engineering,Shanghai Jiaotong University,Shanghai 200240,China);Three dimensional simulations of tank sloshing and dynamicstress analysis of the tank wall based on multi-material ALE[J];Journal of Beijing Jiaotong University;2011-04
2 LEI Feng-bin,CAO Duan-lin(School of Chemical Engineering and Enironment,North University of China,Taiyuan 030051,China);Numerical Simulation of the Shaped Charge Jet from Tungsten-Copper Powder Liner[J];Chinese Journal of Explosives & Propellants;2010-06
3 YANG Zhi-guang,ZHANG Yue-bing,SUI Yun-kang, CHEN Min (College of Mechanical Engineering and Applying Electronic Technique, Beijing University of Technology, Beijing 100022, China;China Academy of Launch Vehicle Technology, Beijing 100076, China);Numerical Simulation on Metal Structure Damage Under Explosion Load[J];Journal of Beijing University of Technology;2006-S1
4 CHEN Min,SUI Yun-kang,YANG Zhi-guang (College of Mechanical Engineering and Applying Electronic Technique, Beijing University of Technology, Beijing 100022, China;Engineering Institute of Aerospace System, Beijing 100076, China);ALE Numerical Simulation of Dynamic Fracture of Cylindrical Shell Under Lateral Impulsion[J];Journal of Beijing University of Technology;2006-S1
5 WANG Guang-yong~(1,2)XUE Su-duo~2 1.Department of Civil Engineering,Tsinghua University,Beijing 100084,China; 2.College of Architecture and Civil Engineering,Beijing University of Technology,Beijing 100124,China;Wind Pressure Coefficients of Membrane Structures Based on Fluid-solid Interaction[J];Journal of Beijing University of Technology;2009-02
6 WANG Bao-shun,LIN Ben,ZHANG Mai-cang,DONG Jian-xin School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Finite-element analyses of die wear during hot extrusion of Hastelloy G3 tubes[J];Journal of University of Science and Technology Beijing;2010-09
7 Zhu Li xin (Engineering Institute of Engineering Corps, PLA Univ.of Sci.&Tech., Nanjing 210007,china);The Cut Effect of a Gear Wave Wall on Air Shock Wave[J];Blasting;2003-01
8 LI Li-sha,XIE Qing-liang,ZHENG Quan-ping,ZHANG Hong-hai,DU Jian-guo (The Third Engineer Scientific Research Institute of the Headquarters of the General Staff,Luoyang 471023,China);Numerical Simulation of Contact Explosion based on Lagrange ALE and SPH[J];Blasting;2011-01
9 Wang Fei, Wang Weice, Wang Yaohua, Gu Yuebing, Lu Ming, Liu Qiang Engineering Institute of Engineering Cor ps, PLA Univ.of Sci.& Tech.,(Nanjing,210 007);Research on the Role of Gear Wave Wall for Air Shock Wave Cut[J];Explosive Materials;2004-01
10 ZHOU Xiangyang①② ①School of Chemical Engineering,Nanjing University of Science and Technology(Jiangsu Nanjing,210094) ②Nanjing Public Security Bureau(Jiangsu Nanjing,210004);Numerical Analysis on Explosion of Explosive in Soil[J];Explosive Materials;2011-06
China Proceedings of conference Full-text Database 7 Hits
1 YAO Cheng-bao,ZHANG Hai-bo,PU Xi-feng,TIAN Zhou (Northwest Institute of Nuclear Technology,ShaanXi Xi'an.710024);Application of ALE method In numerical simulation of explosion dynamics[A];[C];2009
2 Sheng ZHANG1,Han CHENG2,Xiong LIU1,Li YU2 1Wuhan Second Ship Design and Research Institute,Wuhan,China 2College of Aerospace Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing,China;Study on Flow Field Characteristics of Airbag Deploying Process[A];[C];2011
3 LU Guimin~1 ZHAO Dazhi~2 CUI Jianzhong~1 1. School of Resources and Environmental Engineering, East China University of Science and Technology, Shanghai 200237 2. Key Laboratory of Electromagnetic Processing of Materials, Ministry of Education, Northeastern University, Shenyang 110004;SEMI-SOLID THIXOEXTRUSION OF ALSI7MGBE ALLOY[A];[C];2008
4 Xi Renqiang,Chen Guoxing (Institute of Geotechnical Engineering,Nanjing University of Technology,Nanjing,210009);Brief review of Deep Water Bridge Pile Foundation's Seismic Response Considering Fluid-Structure Interaction[A];[C];2008
5 Li Bing Cao Xue Yun Xinbing Fan Zhixin Song Baoyun (School of Material Science and Engineering,Dalian Jiaotong University,Dalian 116028,China);Numerical Simulation of Continuous Extrusion Process for Copper Bus-bar Based on Finite Volume Method[A];[C];2007
6 Xia Yunjin,Wang Fuming~*,Wang Jinlong(School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China);Simulation of Stress Distribution in Continuous Casting Mold of Free-Cutting Steel 38MnVS[A];[C];2010
7 Zhu Zhengyang(School of Civil Engineering,Xi'an University of Architecture and Technology,Xi'an 710055,China);Research in the interaction of blast wave with semicircular arched structure near the ground explosion[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Leng Yan Jing Zuojun (College of Electromechanical Eng., North China Univ. of Tech., 100041, Beijing, China);Isothermal Extrusion of Aluminum Profiles[J];Journal of North China University of Technology;2004-01
2 WANG Jian-sheng,WANG Hua-kun,ZHONG Yi,ZHANG Yu-xin,LI Yong (Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology,Kunming Yunnan 650093 China);Microstructure of Electron-spark Deposited Coating on H13 Steel[J];China Surface Engineering;2003-06
3 Ma Furong, Zhang Tonghe, Liang Hong, Zhang Huixing, Zhang Xiaoji (Key Laboratory of Beam Technology and Materials Modification of Ministry of Education, Institute of Low Energy Nuclear Physics, Beijing Normal University; Beijing Radiation Center: 100;PROPERTIES OF C+W CO-IMPLANTED H13 STEEL BY MEVVA ION SOURCE[J];Journal of Beijing Normal University(Natural Science);2002-01
4 MI Lin1,WEI Xian-kun1,WAN Xin-ming2,XIA Ming1(1.Chongqing Institute of Automobile,Chongqing University of Technology,Chongqing 400054,China; 2.Automotive Engineering Research Institute Co.,Ltd.,Chongqing 400039,China);A Research on the Impact Energy-absorbing Capacity of the Aluminum Alloy Energy-absorbing Box of the Bumper[J];Journal of Chongqing University of Technology(Natural Science);2012-06
5 KONG Dejun ZHANG Yongkang FENG Aixin (School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013;Technologies for Laser Surface Modification Treatment of H13 Hot-working Die Steel[J];Materials Review;2005-08
6 JIN Chao-hai, ZHOU Xian-bin, DIAO Ke-shan, LI Xiao-xing(Beijing University of Aeronautics and Astronautics, Sheet Metal Forming Research Center, Beijing 100083, China);Springback analysis for stretch bending of aluminum profile[J];Material Science and Technology;2004-04
7 LI Jing-yuan1,HUANG Dong-nan2 (1. School of Materials Science and Technology,University of Science and Technology Beijing,Beijing 100083,China;2. School of Materials Science and Engineering,Inner Mongolia University of Technology,Huhhot 010051,China);Analysis of extrusion flow behaviors of square pipe deformed with three-porthole and two-core die[J];Materials Science and Technology;2010-02
8 Huang Kejian1 , Bao Zhongxu1, Chen Zhezhong1, Fu Lijun1, Lin Wenguo2 (1. Nanchang University, Nanchang 330029, China) ( 2. JiangXi FangDa Aluminium CO.,LTD. Nanchang 330029, China);The Application of the Numerical Simulation Technology Based on Finite Volume Method During the Design of Extrusion Die[J];Rare Metal Materials and Engineering;2004-08
9 Shanghai Jiaotong University Yu Huping Peng Yinghong Ruan Xueyu;Numerical simulation of hollow die extrusion processing[J];FORGING & STAMPING TECHNOLOGY;1999-05
10 YAN Hong XIA Ju-chen HU Qiang YANG Guo-tai LIU Xiao-yang LUO Jin-sheng(1.College of Mechanical & Electrical Engineering, Nanchang University;2.State Key Laboratory of Die Technology, Huazhong University of Science and Technology;3.Jiangxi Lantu Aluminum Co. Ltd.);Finite element simulation of metal deforming flow during profile extrusion process[J];Forging & Stamping Technology;2004-06
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 CHEN Zhen-shan;HUANG Yao;WANG Lei-gang;WANG Jun-wen;School of Material Science and Engineering,Jiangsu University;School of Public Administration,Hehai University;;Experiment and numerical simulation analysis of extruded aluminum profiles with hollow billets[J];Forging & Stamping Technology;2013-06
2 Ma Yunzhu;Wang Jianning;Liu Wensheng;Liu Yuanbiao;Zhang Jiajia;State Key Laboratory of Powder Metallurgy,Central South University;;Finite element simulation and optimization of forming process for tungsten-based alloys screw extrusion based on rigid-plastic model[J];Powder Metallurgy Technology;2015-01
3 Hu Dongpo;Wang Leigang;Huang Yao;School of Material Science and Engineering,Jiangsu University;;Steady-state simulation and die improvement on the extrusion of prolate aluminum profile[J];Forging & Stamping Technology;2015-04
4 Guo Lili;Li Yongbing;Pei Jiuyang;Engineering Research Center of Continuous Extrusion,Dalian Jiaotong University;Advanced Manufacture Technology Center,China Academy of Machinery Science and Technology;;Numerical simulation and experimental verification of ZK60 magnesium alloys profile extrusion based on Hyper Xtrude[J];Forging & Stamping Technology;2015-06
5 Zong Rongrong;Hao Qiuhong;Li Junpeng;Wang Jinghai;Cheng Rence;Cheng Renzhai;National Engineering Research Center for Plastic Working of Aluminium Alloys,Shandong Nanshan Aluminum Co. ,Ltd.;Beijing Nanshan Institute of Aeronautical Materials;;Simulation optimization on extrusion speed for extra-wide aluminum profile with thin-walls used for railway vehicles[J];Forging & Stamping Technology;2015-07
6 Lu Shuai;Wang Yongxiao;Lou Shumei;Su Chunjian;Shandong YANCON Light Alloy Co.,Ltd.;Department of Mechanical and Electrical Engineering,Shandong University of Science and Technology;;Analysis on transient extrusion process of hollow aluminum profile based on finite element method[J];Forging & Stamping Technology;2015-10
7 TANG Yan;Nanjing Communications Institute of Technology;;The Effects of Different Extrusion Speed on the Aluminum Profile Extrusion Process[J];Machine Design and Manufacturing Engineering;2013-09
8 MA Jun-lin;SONG Jian;LI Ping;School of Materials Science & Engineering,Hefei University of Technology;;Strength Checking and Structure Optimization of Die for Connection Block of Warm Extrusion[J];Journal of Netshape Forming Engineering;2014-03
9 QIAO Lei;WANG Meng-jun;CHEN Xin-yi;WANG Ying-xin;YUAN Yu-bao;PAN Xue-zhu;The Key Laboratory of Nonferrous Metal Materials Science and Engineering of Ministry of Education, Central South University;Guangya Aluminium Co. Ltd.;;Design and Simulation of Multihole and Multistage Diversion Mode for Aluminum Profile[J];Aluminium Fabrication;2014-06
10 TANG Yan;Nanjing Communication Institute of Technology;;The CAE analysis of friction state on the hot extrusion molding of aluminum[J];Machine Design and Manufacturing Engineering;2015-02
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Leng Yan Jing Zuojun (College of Electromechanical Eng., North China Univ. of Tech., 100041, Beijing, China);Isothermal Extrusion of Aluminum Profiles[J];Journal of North China University of Technology;2004-01
2 WANG Kaikun; XIE Jianxin (Matrial Science and Engineering School, UST Beijing, Beijing 100083, China);Cohinined Stress Analysis of Multilayer Flat Container with Intemal Hole[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-05
3 Huang Kejian1 , Bao Zhongxu1, Chen Zhezhong1, Fu Lijun1, Lin Wenguo2 (1. Nanchang University, Nanchang 330029, China) ( 2. JiangXi FangDa Aluminium CO.,LTD. Nanchang 330029, China);The Application of the Numerical Simulation Technology Based on Finite Volume Method During the Design of Extrusion Die[J];Rare Metal Materials and Engineering;2004-08
4 Yan Jianhui et al;Way of improving the die service life of aluminum profile[J];Electromachining & Mould;2002-02
5 Peng Biyou, et al;Research on CAD/CAE/CAM intergrated system of aluminum profiles extrusion die[J];Electromachining & Mould;2003-05
6 HAN Xian-hong,LI Xi-kui~* (State Key Lab.of Struct.Anal.for Ind.Equip.,Dalian Univ.of Technol.,Dalian 116024,China);An ALE free surface tracking and mesh generation scheme for injection molding process[J];Journal of Dalian University of Technology;2005-05
7 Shanghai Jiaotong University Yu Huping Peng Yinghong Ruan Xueyu;Numerical simulation of hollow die extrusion processing[J];FORGING & STAMPING TECHNOLOGY;1999-05
8 Nanchang University Chen Zezhong Bao Zhongxu Liu Hesheng East China Jiaotong University Huang Zhichao;Development and application of ANSYS in aluminum profile extrusion[J];Forging & Stamping Technology;2002-04
9 ZHAO Yun-lu 1,XUE Rong-jing 1,LIU Jing-an 2 (1.Shenyang Xinxin Die Co.Ltd.,Shenyang Liaoning 110043,China; 2.Southwest Aluminium Co.Ltd. Chongqing 401326, China);Design of the flat extrusion cylinder[J];Forging & Stamping Technology;2005-03
10 WANG Mei-qin,XU Zai-wen,WANG Jiong-hua,LIU Quan-kun (School of Civil Engineering,Hefei University of Technology,Heifei Anhui 230009,China);Photoelastic analysis of double-layer flat extrusion container[J];Forging & Stamping Technology;2005-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved