Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2011-01
Add to Favorite Get Latest Update

Research on forging-out and mechanical properties after forging of AZ80 magnesium alloy

DENG Zi-yu1,2,CHEN Xian-gang2,WANG Hua-wen3,CUI Jian-zhong1(1.School of Materials Science and Metallurgy,Northeastern University,Shenyang 110004,China;2.School of Materials Science and Technology,Shenyang Ligong University,Shenyang 110159,China;3.Hunan ElectricityConstruction and Supervisor Consulting Co.,Ltd.,Changsha 410007,China)  
Forging-out of the as-cast AZ80 magnesium alloy was researched and the main mechanical properties target were tested at room temperature and high temperature.The results show that the temperature,deforming rate,each pass pressing download and feeding length of each time have a great influence on the deformation of the magnesium alloy.The reasonably technology parameter control can obtain the ideal forging result.At room temperature,the strength increases with the increasing of forging ratio.Under the tensile temperatures of 250,300,350 and 370 ℃,the according strengths would be shown as 103.5,54.7,26.6 and 18.4 MPa.The plasticity raised during the temperature of 250-300 ℃,but went down during 350-370 ℃.
【Fund】: 辽宁省创新团队项目(2009T084);; 沈阳市重点实验室项目(1081101-1-00)
【CateGory Index】: TG359;TG319
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 3 Hits
1 Zhang Qinglai, Hu Yongxue, Wang Lili (Jiangsu University, Zhenjiang 212013, China);Stress-Strain of Uniaxial Tension and Recrystallization Structures of AZ31B Magnesium Alloy[J];Rare Metal Materials and Engineering;2008-04
2 HE Wen-wu,GUO Hui-guang,LIU Jian-sheng(School of Materials Science and Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China);Analysis and prevention of forging cracks[J];Forging & Stamping Technology;2010-01
3 GUO Qiang,YAN Hongge,CHEN Zhenhua,ZHANG Hui School of Materials Science and Engineering, Hunan University, Changsha 410082;EFFECT OF MULTIPLE FORGING PROCESS ON MICRO-STRUCTURE AND MECHANICAL PROPERTIES OF MAGNESIUM ALLOY AZ80[J];Acta Metallurgica Sinica;2006-07
Chinese Journal Full-text Database 10 Hits
1 YUAN Tao,DUAN Li-ping,CHEN Yun(Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Fracture failure analysis of left steering knuckle arm[J];Ordnance Material Science and Engineering;2006-04
2 CHEN Gang1,FAN Pei-geng1,PENG Xiao-dong2,CAO Peng-jun1,CAI Wei1 (1.College of Metallurgy and Materials Engineering, Chongqing University of Science and Technology,Chongqing 400050,China; 2.College of Mechanical Engineering, Chongqing University, Chongqing 400044, China);Development of recovery and recycling technology of magnesium alloy scraps[J];Ordnance Material Science and Engineering;2007-05
3 YANG Yong-biao,WANG Fu-chi,TAN Cheng-wen,CAI Hong-nian (School of Material Science and Engineering,Beijing Institute of Technology,Beijing 100081,China);Research progress in dynamic mechanical properties of magnesium alloy[J];Ordnance Material Science and Engineering;2008-03
4 ZHANG Guangming,CHENG Jianguo,ZHU Xiurong,ZHAO Guotian,WANG Dongsheng(Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China);Research on free forging process and mechanical property of 7A05 aluminum alloy[J];Ordnance Material Science and Engineering;2009-03
5 ZHANG Hui 1, ZHANG Chang-ming 2 (1. Dept. of M.S. E. of Shanxi University of Technology, Hanzhong 723003, China; 2. Dept. of B. C. of Shanxi University of Technology, Hanzhong 723003, China);Comment on the development of forge process technology[J];Science & Technology of Baotou Steel(Group) Corporation;2004-05
6 DING Rui, CAI Qingwu, WEI SongboNational Engineering Research Center for Advance Rolling Technology, University of Science and Technology Beijing, Beijing 100083, China;Effect of deformation parameters on the deformation resistance of AZ31 alloy[J];Journal of University of Science and Technology Beijing;2008-03
7 ZHAO Qing,ZHANG Zhi-you,CHEN Ning(Nanchang Institute of Aeronautical Technology,Nanchang 330063,China);Effect of Final Voltage on Corrosion Resistance of MB8 Mg Alloys by Micro-arc Oxidation[J];Surface Technology;2007-04
8 GAO Fu-qi1,GAO Bin2,GAO Xiang3 (1.Fengtai Surface Technology Institute,Chongqing 400039,China;2.Meitai Surface Treatment of Metal Co.Ltd.,Chongqing 400039,China);Ni-P Alloying Treatment of Mg-Li Alloy Surface[J];Surface Technology;2007-06
9 ZHANG Zhi-you, ZHAO Qing, CHEN Ning (College of Materials Seience & Engineering Nanchang Institute of Aeronautical Technology, Nanchang 330063, China);The Microstructure and Phase Composition of Micro-Arc Oxidation Coating on Magnesium Alloy[J];Materials Protection;2008-03
10 CHEN Zhenhua, YANG Chunhua, HUANG Changqing, XIA Weijun, YAN Hongge(School of Materials Science and Engineering, Hunan University, Changsha 410082);Investigation of the Twinning in Plastic Deformation of Magnesium Alloy[J];Materials Review;2006-08
China Proceedings of conference Full-text Database 10 Hits
1 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
2 TAN Hai-bo, DOU Zhong-lin (Hongyuan Aviation Forging & Casting Industry Company, Xianyang 713801, China);Forging Process Improvement of GH901 Turbine-Shaft[A];[C];2006
3 ZHANG Yong-jun HAN Jing-tao (School of material Science and Engineering,UST Beijing 100083);Experiment on diffusion bonds of metal under hot forming[A];[C];2007
4 Wang Jian-jin Yan Hong Zhou Bing-feng Zhou Liu-ru (Institute of Advanced Forming &Manufacturing and Die & Mold,Nanchang University,Jiangxi Nanchang 330031,China);Numerical simulation of thixo-extrusion for wrought magnesium alloy[A];[C];2007
5 ;The determination of Yada model's coefficient of casting AZ31 Mg alloy and the simulation of micro-organization evolution[A];[C];2008
6 Li Yongjun Zhang Kui Li Xinggang Zhao Xin Zhang Kai (State Key Lab for Fabrication & Processing of Non-ferrous Metals,Beijing General Research Institute for Non-ferrous Metals,Beijing 100088,China);Uniform heat treatment and microstructure of Mg-Y-Nd-Zr alloy[A];[C];2007
7 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng(College of Material Science and Engineering of Chongqing University,Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
8 Wei Li1 Fu Zhongliang 2, Li Changkun 3 Wang Xinpeng4 (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
9 Nie Kaibo, Wu Kun, Deng Kunkun, Wu Yewei, Wang Xiaojun, Zheng Mingyi, Hu xiaoshi School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, 150001;Effect of INITIAL Forging temperature on Microstructures and Mechanical Properties of SiCp/AZ91 Composite[A];[C];2010
10 Nie Kaibo,Wu Kun,Deng Kunkun,Wu Yewei,Zheng Mingyi,Hu xiaoshi (School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001);Effiect of multidirectional forging on microstructures and mechanical properties of SiCp/AZ91 Composite[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Xin GAO Yuwei NAN Yun JING Tianfu (Key Lab. of Metastable Materials Science and Technology,Hebei;Departement of Materials Science and Technology,Yanshan University,Qinghuangdao 066004,P.R.China);Severe Plastic Deformation Methods for Bulk Nanostructured Materials[J];Materials Review;2003-12
2 LI Pei yong,DAI Sheng long,LIU Da bo,CHAI Shi chang,LI Yu ren (Institute of Aeronautical Materials, Beijing 100095,China);Status of Research on Material Damping and Damping Alloys[J];JOURNAL OF MATERIALS ENGINEERING;1999-08
3 LI Pei yong,DAI Sheng long,CHAI Shi chang,LI Yu ren (Institute of Aeronautical Materials, Beijing100095,China);Recent Developments in New High Damping Metallic Materials[J];JOURNAL OF MATERIALS ENGINEERING;2000-01
4 YAN Feng WU Kun ZHAO Min (School of Materials Science and Engineering, Harbin Institute of Technology,Harbin 150001,China)[WT5HZ];Superplasticity of SiC_w/MB15 Magnesium Matrix Composites[J];JOURNAL OF MATERIALS ENGINEERING;2000-03
5 MA Chun jiang,ZHANG Di,QIN Ji ning,DING Wen jiang (State Key Lab of MMCs,Shanghai Jiaotong University,Shanghai 200030,China)[WT5HZ];Research on Damping Capacity of Mg-Li-Al Alloys[J];Journal of Materials Engineering;2001-05
6 Zhao Jiaxiang(Specialist Group for Applied Research of Advanced Military Miterials,State Commision of Science,Technology and Industry for National Defense);Strengthening to Develop Military Functional Materials[J];Journal of Materials Engineering;1995-03
7 Us Yin;Zhang Guiding;Wang Human;Gang DI;(Shanghai Jo Tong University);Properties and Structure of SiC_W+B4C_P/MB15 Magnesium Matrix Composite[J];JOURNAL OF MATERIALS ENGINEERING;1996-09
8 ZHANG Hai(Mechanical Engineering School,Yanshan University,Qinhuangdao 066004,China);Inclusion morphology of disabled pipe plate[J];Materials Science and Technology;2007-06
9 LI Xin,LIU Jing(School of Materials Science and Engineering,Beijing University of Science and Technology,Beijing 100083,China);Study on Inner Crack Healing of Ultra-super-critical Rotor 12Cr Steel[J];Development and Application of Materials;2009-01
10 Zhang Tingjie, Zeng Quanpu, Mao Xiaonan, Zhang Xiaomin,Zhen Liyin, Qi Yulian (Northwest institute for Nonferrous Metal Research,Xi'an 710016);Tensile Properties of TiC-Particulate-Reinforced Ti Matrix Composites at Elevated Temperature[J];Rare Metal Materials and Engineering;2001-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved