Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Forging & Stamping Technology》 2011-01
Add to Favorite Get Latest Update

Research on extrusion defects of auto half shaft bushing and technology improvement

JIA Jian-bo,XU Yan(College of Mechanical Engineering,Bei Hua University,Jilin 132021,China)  
Extrusion forming process of half shaft bushing was numerically simulated by using finite element analysis software Deform.Cracking causes of half shaft bushing were simulated in the third extrusion process.Based on this,improved technology of extrusion forming with double punches was proposed.Through the comparison of main parameters,including damage,velocity,effective stress and effective strain,the superiority of double-punch extrusion technology was stated.Finally,correctness of finite element simulation results was verified with experimental method.Analyzing the microstructure of good products fabricated by double-punch extrusion,the results show that double-punch extrusion technology is a better technology with practical application value.
【Fund】: 全国大学生创新性实验计划项目(091020111)
【CateGory Index】: U463.218.6;TG376
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 6 Hits
1 WEN Zhi-gao~(1,2),XIONG Yun-chang~3,PENG Xiao-nan~1(1.Henan University of Science and Technology,Luoyang Henan 471003,China;2.Henan Yingwei Dongfeng Auto Machinery Co.Ltd.,Nanzhao Henan 474674,China;3.Nanyang Institute of Technology,Nanyang Henan 473004,China);Study of compound hot extrusion process for vehicle hub axles[J];Forging & Stamping Technology;2005-06
2 YU Guang-zhong,JIANG Peng,HU Fu-rong,CAO Fei,FU Dian-yu(Beijing Research Institute of Mechanical & Electrical Technology,Beijing 100083,China);Numerical simulation of forging and deep extrusion compound process for axle shaft tube[J];Forging & Stamping Technology;2007-02
3 HU Yamin(Material Engineering College Chongqing Technology Institute,Chongqing 400050,China);Precision Forging Forming of Semiaxle Bushing domestic and Overseas[J];;2005-02
4 ZHANG Li,LU Liwei,LIU Tianmo,LIU Jianzhong,LI Nan,SUN Chaoyong(College of Materials Science and Engineering,Chongqing University,Chongqing 400030);Simulation and Experiment Analysis of Dual-directional Extrusion of AZ31 Mg Alloy[J];Materials Review;2009-10
5 DENG Yu shan 1, WANG Xue ming 1, YAO Xiao jing 2, WANG Yu min 1, LIU Bo 1 (1.Division of University Run Factories & Companies,Jilin University of Technology,Changchun 130025,China; 2.Vocational College,FAW,Changchun 130011,China);Application of Three Roller Cross Rolling in Backbridge Half Shaft Casing for Light Duty Cars[J];JOURNAL OF JILIN UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION);2000-03
6 Han Yingchun et al.(Jilin University of Technology, Changchun,China);Technology Study of the Forward Extrusion and Cross Rolling for the Rear Axle Shaft Sleeve of CA1040 Light Truck[J];CHINA MECHANICAL ENGINEERING;1997-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LIU Bo~1,HUANG Xiao-yan~2 (1.Zhenjiang College;2.ZhenJiang University of ship and boat Technology,Zhenjiang 212003,China);Analysis of Special Technology for Rolling Half-shaft Casing[J];Journal of Benxi College of Metallurgy;2003-04
2 CHEN Li-jun,ZHANG Ru-hua,WANG Hai-hua,LU Xian-feng(School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330029,China);Experimental Research on extrusion process of JX1030 vehicle back-bridge axle shaft sleeve[J];Forging & Stamping Technology;2007-02
3 YU Guang-zhong,JIANG Peng,HU Fu-rong,CAO Fei,FU Dian-yu(Beijing Research Institute of Mechanical & Electrical Technology,Beijing 100083,China);Numerical simulation of forging and deep extrusion compound process for axle shaft tube[J];Forging & Stamping Technology;2007-02
4 LIN Xin-bo1,WANG Yi2,ZHANG Zhi-liang3,LI Ji-bin1(1.College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China;2.Research Institute of Qinghua Univesity in Shenzhen,Shenzhen 518057,China;3.National Die and Mold CAD Research Center,Shanghai Jiaotong University,Shanghai 200030,China);Research on formability of aluminium alloy bicycle back hubs formed by warm extrusion[J];Forging & Stamping Technology;2008-04
5 ZHANG Ru-hua,WANG Qin-jun,WANG Hai-hua,LU Xian-feng(School of Mechanical and Electrical Engineering,Nanchang University,Nanchang 330031,China);Experimental research of forming process for axle shaft sleeve with flange far from big end[J];Forging & Stamping Technology;2008-06
6 HU Yamin(Material Engineering College Chongqing Technology Institute,Chongqing 400050,China);Precision Forging Forming of Semiaxle Bushing domestic and Overseas[J];;2005-02
7 HUANG Shuhai,ZHANG Baohong,ZHANG Zhimin (School of Materials Science and Engineering,North University of China,Taiyuan 030051,Shanxi China);Forming Process and Die Design for Cups[J];China Metal Forming Equipment & Manufacturing Technology;2007-05
8 LI Ling,ZHANG Guodong,HUANG Renguo,ZHANG Jianqiang,ZHANG fuju (College of Power and Mechanical Engineering,Wuhan University,Wuhan 430072,Hubei China);Optimization of the Hot Extrusion Parameter for Hub Tube Based on Taguchi Method[J];China Metal Forming Equipment & Manufacturing Technology;2009-01
9 HAN Ying\|chun\+1, ZHU Xiao\|bo\+2\;(1. Superplastic and Plastic Research Institute, Jilin University, Changchun 130025, China; 2. The Second Aeronoautical Institute of Air Force, Changchun 130022, China);Research on Intergrated Product Development of Read Axle Shaft Sleeves[J];Engineering Design;2001-04
10 FENG Junwei,PEI Tengpeng,SUN Qian,LI Lifang (Henan Yingwei Dongfeng Machinery Co.,Ltd.,Nanzhao 474674,Henan China);Analysis of Factors which Influences Life of Hot Extrusion Die[J];China Metal Forming Equipment & Manufacturing Technology;2010-03
China Proceedings of conference Full-text Database 1 Hits
1 ;Experimental research of forming process for axle shaft sleeve with the flange far from the big end[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 The Forging Plant of DongFeng Moto.Co.Ltd Chen Xuehui;Upset forging technology of tube parts[J];Forging & Stamping Technology;2002-06
2 Beijing Research Institute of Mechanical & Electrical Technology Zeng Zhipeng Liu Xiaofei Jin Quanlin Liuzhou Fangsheng Forging Co.Ltd Yao Jiongtao;Simulation and optimizition of extrusion process for half-shaft of automobile[J];Forging & Stamping Technology;2002-06
3 WEN Zhi-gao~(1,2),XIONG Yun-chang~3,PENG Xiao-nan~1(1.Henan University of Science and Technology,Luoyang Henan 471003,China;2.Henan Yingwei Dongfeng Auto Machinery Co.Ltd.,Nanzhao Henan 474674,China;3.Nanyang Institute of Technology,Nanyang Henan 473004,China);Study of compound hot extrusion process for vehicle hub axles[J];Forging & Stamping Technology;2005-06
4 JIANG Peng~(1),FANG Gang~(2),CAO Shi-jin~(3),YU Guang-zhong~(1),Hu Fu-rong~(1),Cao Fei~(1),Cheng Tian-fu~(3)(1.Beijing Research Institute of Mechanical & Electrical Technology,Beijing 100083,China;2.School of Mechanical Engineering,Tsinghua University,Beijing,100084,China;3.Hubei Tri-Ring Forging Co.,Ltd.,Xiangfan Hubei,411700,China);FEM analysis of the extrusion-forging compound process for knuckle of Benz heavy truck[J];Forging & Stamping Technology;2006-01
5 ZHANG Shuizhong,et al;Cold extrusion technology of pressing drill sleeve[J];Metalforming Machinery;2002-02
6 DENG Yu shan 1, WANG Xue ming 1, YAO Xiao jing 2, WANG Yu min 1, LIU Bo 1 (1.Division of University Run Factories & Companies,Jilin University of Technology,Changchun 130025,China; 2.Vocational College,FAW,Changchun 130011,China);Application of Three Roller Cross Rolling in Backbridge Half Shaft Casing for Light Duty Cars[J];JOURNAL OF JILIN UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE EDITION);2000-03
7 Wuxi Metallurgical Machinery Plant Li Langfu;New Technology of Making the Shaft of Automobile Rear Axle Housing[J];Metal Forming Technology;1997-04
8 Southwest Technique & Engineering Institute Wu Taibin Ni Zeming Zhou jiquan wu Xin;Cold Extrusion of Brass Housing with Small and Deeply Blind Hole[J];Metal Forming Technology;1997-05
9 WEN Zhi gao (Dongfeng Machinery Factory,Yunyang 474674,China);New Hot-Extrusion Technology of the Boss Quill[J];Metal Forming Technology;2002-02
10 WEN Zhi-gao (Dongfeng machina factory operateel by the nection,Yunyang 474674,China);Cause of the Folds Appeared in the Tube of the Semi-axis Housings and the Appropriate Precaution Solutions[J];Metal Forming Technology;2002-04
China Proceedings of conference Full-text Database 1 Hits
1 CAO Fei, JIANG Peng,Cui Hong-juan, ZHANG Ji-gnang(Beijing Research Institute of Mechanical and Electrical Technology, Beijing 100083, China; China Machine Press, Beijing 100037, China);FEM simulation of forging process of crank[A];[C];2005
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved