Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Powder Metallurgy Technology》 1992-01
Add to Favorite Get Latest Update

THE YIELD CRITERION OF POWDER COMPACT

Ren Xueping (University of Science and Technology, Beijing 100083, China) Wang Erde and Huo Wencan (Harbin Institute of Technology, Harbin 150006,China)  
At first, starting Point and hypothesis used to establish yielb criterion of powder compact have been analysed. Author think correlation between poisson ratio and relative density and experimental testment of the yield criterion of powder compact and relationship between yield stress and relative density are principal points to studying yield criterion of powder compact.Therefore, a series of theoretical analyses and experimental investigations for the yield criterion of powder compact have been carried out in this paper.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 10 Hits
1 Zhao Dong; Huang Wenbin;Lu Zhenyou. Journal of Beijing Forestry University (2000)22(5)65~67 [Ch,5 ref.]College of Forest Products and Engineering, Beijing For.Univ.,100083,P.R.China.;The constitutive equations of corn stalk powder in closed cylinderical die.[J];JOURNAL OF BEIJING FORESTRY UNIVERSITY;2000-05
2 HUA Lin~(1,2),QIN Xun-peng~1 (1.Wuhan University of Technology,Wuhan Hubei 430070,China; 2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology);SIMPLIFICATION OF YIELD CRITERION FOR POWDER METALLURY MATERIALS[J];Powder Metallurgy Industry;2004-02
3 He Jun, Kang Yonglin, Ren Xueping (Department of Metal Forming, USTB, Beijing 100083) Xin Ping (TOSHIBA Ceramics Company);FEM Analysis of Density Flaw of Ceramic Powders during Cold Isostatic Pressing[J];Powder Metallurgy Technology;2001-06
4 QIN Xun-peng,HUA Lin(College of Materials Science and Engineering, Wuhan University of Technology, Wuhan Hubei 430070,China);Generalized Yield Criterion for Sintered Powder Metallurgy Materials[J];Automobile Technology & Material;2005-01
5 HUA Lin 1,2 QIN Xun-peng 1(1.Wuhan University of Technology,wuhan 430070)(2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology,wuhan 430074);The geometrical form of yield function of sintered powder materials[J];Journal of Plasticity Engineering;2004-03
6 ZHOU Ming-zhi LI Ping XUE Ke-min (School of Material Science and Engineer,Hefei University of Technology,Hefei 230009 China);Coupled thermo-mechanical FEM analysis of the sintered powder during upsetting process[J];Journal of Plasticity Engineering;2005-06
7 HUA Lin 1,2 ,QIN Xun peng 1 (1 School of Materials Science and Engineering, WUT, Wuhan 430070, China; 2 State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, HUST, Wuhan 430074, China);Mechanical Calculation of Several Plastic Forming Processes for Powder Metallurgical Materials[J];Journal of Wuhan University of Technology;2004-02
8 HUA Lin 1,2 ,QIN Xun-peng 1 (1.School of Materials Science and Engineering, WUT, Wuhan 430070, China; 2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, HUST, Wuhan 430074, China);Research and Progress of Yield Criterion for Sintered Powder Materials[J];Journal of Wuhan University of Technology;2004-04
9 HUA Lin 1,2,QIN Xun-peng1(1.School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China;2.State Key Laboratory of Plastic Forming Simulation and Die & Mould Technology, Huazhong University of Science and Technology, Wuhan 430074, China);A Generalized Upper Bound Method for Powder Metallurgical Material in Plastic Plane Strain[J];Journal of Wuhan University of Technology;2004-12
10 HUA Lin, QIN Xun-peng (School of Materials Science and Engineering, Wuhan University of Technology, Wuhan 430070, China);Geometrical Properties of Two Yield Criteria for Powder Metallurgical Materials[J];Journal of Wuhan University of Technology;2005-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHENG Yi 1,CHENG Cai yuan 2(1.Tekla Shanghai Representative Office,Shanghai 200437,China; 2.Research Institute of Structural Engineering,Tongji University,Shanghai 200092,China);A new energy dissipation method in aseismic structures[J];Building Science Research of Sichuan;2001-03
2 NING Jun-sheng 1, PENG Xiu-feng 1, ZHANG Yong-xin 2, LI Guicai 2 (1.Department of Physics ,Yantai University ,Yantai 264005,China);Numerical analysis of stress on pressure-vessel[J];Ordnance Material Science and Engineering;2004-01
3 Li Ruixing(Dept 4,Chemical & Industry Metallurgy Institule,Academia Sinica,Beijing 100081);Cai Hongnian;INVESTIGATION ON RESIDUAL STRESS AND STRENGTH OF AUTO FRETTAGE-AGEING CYLINDERS Part I Residual Stress of Half-finished Cylnders[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1995-01
4 Gao Dashui Yu Qun Yu Guyuan;Research in Slip-Sinkage of Tractor Driving Wheels and Its Effects-on Traction Performance[J];Journal of Beijing Institute of Agricultural Mechanization;1984-03
5 Zeng Guoping (Teaching and Research Section of Mechanics of Materials);The Application of Twin Shear Stress Yield Criterion in the Plane Problems[J];Journal of Beijing Agricultural Engineering University;1988-01
6 Wu Guoxun Zhang Xing(Dept.of Flight Vehicle Design and Applied Mech. );AN ENGINEERING SOLUTION OF ELASTO-PLASTIC BEAMS MADE OF GENERAL HARDENING MATERIALS[J];Journal of Beijing University of Aeronautics and Astronautics;1992-04
7 OUYANG Chun~(1,2), ZHAO Guo-zhi~1, DU Zhong-hua~1, LI Wen-bin~1(1.School of Mechanical Engineering, Nanjin University of Science and Technology, Nanjing210094, Jiangsu, China;2.Engineering Institute Engineer Corps, PLA University of Science and Technology, Nanjing210007, Jiangsu, China);An engineering analytical model for projectiles to penetrate normally into semi-infinite reinforced concrete targets[J];Explosion and Shock Waves;2004-03
8 ZHANG Jing1,SHI Xing-hua1,WANG Shan1,YANG Shi-quan2(1 College of Civil Engineering, Harbin Engineering University,Harbin 150001, China;2China Academy of Engineering Physics, Mianyang 621900,China);Numerical simulation and experiment research of defensive structure subjected to underwater contact explosions[J];Journal of Ship Mechanics;2008-04
9 Deng Ronggui;FORMULAS FOR INITIAL STRESS CALCULATION ON DEMARCATION SURFACES IN PHOTOELASTIC EXPERIMENTS WITH DIFFERENT ELASTIC MODULUS[J];;1989-03
10 LI Xiao-hong,KANG Yong (Mechanical Engineering Dept.,Xi'an Shiyou University,Xi'an,710065,Shaanxi,China);Study of Loading Capacity of Pipeline with Defects Based on ANSYS Analysis[J];Journal of Chengde Petroleum College;2009-03
China Proceedings of conference Full-text Database 6 Hits
1 DENG Hong-liang (The Civil Engineering College,Beijing University of Technology,Beijing,100022);STUDY OF COEFFICIENTS MODIFYING AREA OF END OF PILE WITH LARGE DIAMETERle ACTED ON BY END-PILE RESISTANCE[A];[C];2005
2 Li Guochang Liu Ziyang Feng Guohui;Behavior of Self-stress Lightweight Concrete Filled Steel Tubular Middle Long Columns under Axial Compressive Loading[A];[C];1995
3 QU Chen~1 YU Yi~2 (1.The Civil Engineering Department of Zhe Jiang University of Science and Technology,Hang Zhou 310012,China; 2.Nanyang Technological University,Singapore 639798,China);Finite Analysis on Centrifugal Concrete-Filled Steel Tubes under Bending and Torsion[A];[C];2005
4 Yang Guanghua (Scientific Research Institute of Water Conservancy and Hydro-electricity of Guangdong Province);A Series of Modified Criterion for Rock Material and its Elasto-plastic constitutive Relations[A];[C];1986
5 Sun Jun Pan Dingyuan (Tongji University);Rock Dynamics and Its Applications in Engineering[A];[C];1989
6 Xia Caichu (Department of Geotechnical Engineering,Tongji University Shanghai 200092) Liu Daan (Institute of Geology,Chinese Academy of Sciences Beijing 100029);A STUDY OF THEORETICAL RHEOLOGICAL MODELS AND THEIR UNITARY MODEL[A];[C];1998
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Yang Anle, Xiao Yong, Wu Renjie, Sun Kang(Institute of compusites, Shanghai Jiaotong University 200030);RECYCLING AND APPLICATION OF FIBER REINFORCED THERMOSET PLASTICS[J];Engineering Plastics Application;1999-06
2 Kang Zhitao,Chen Zhenhua,Yuan Wuhua,Yan Hongge;PREPARATION OF LARGE-SIZED AND THICK-WALLED HIGH-TEMPERATURE Al ALLOY TUBE BY MULTI-LAYER SPRAY DEPOSITION[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-05
3 LIU Jian - tao, CHEN Huan - ming, HU Ben-fu, LIU Guo - quan, ZHANG Yi - wen (1. School of Material Science and Engineering, University of science&Technology Beijing, Beijing 100083, China; 2. High Temperature Material Institute, Central Iron Steel Research Institute, Beijing 100081, China);High temperature deformation and dynamic recrystallization of a new type of P/M superalloy[J];Ordnance Material Science and Engineering;2004-04
4 Shi Ziyuan(Heat Treatment Teaching and Researching Office,Dalian Roilway Institute,Datian 116022);Shao Changquan;FABRICATION OF SiC PARTICULATE AL MATRIX COMPOSITES[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1994-04
5 Zhao Jiaxiang(P.O.Box 9211.Beijing 9100076);STATUS AND DEVELOPMENT OF ADVANCED COMPOSISTS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1994-04
6 Wu Shusen;RESEARCH AND APPLICATION OF METAL MATRIX COMPOSITES IN JAPAN[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1999-02
7 Zhang Jishan; Zhang Weijun; Cui Hua; Duan Xianjin; Chen Guoliang (State Key Laboratory for Advanced Metals and Materials, UST Beijing, Beijing 100083, China Material Sciences and Engineering School, UST Beijing);Mechanical Properties of Spray Deposited Ni_3Al Alloys and 2618Al+SiCp Metal Matrix Composites[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1997-01
8 Zhang Jishan; Chen Guoliang(State Key Laboratory for Advanced Metals and Materials, UST Beijing, Beiing 100083, China);Recent Progress in Spray Forming Technique for Materials Processing[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1997-01
9 WANG Feng; YANG Bin; CUI Hua; DUAN Xianjing; ZHANG Jishan(State Key Laboratory for Advanced Metals and Materials, UST Beijing, Beijing 100083, China);Microstructure and Mechanical Properties of Spray Deposited Al-20Si-5Fe-3Cu-1Mg Alloy[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;2000-04
10 HU Dunyuan, YANG Bin, CUI Hua, DUAN Xianjing, ZHANG Jishan, XIONGBaiqing State Key Laboratory for Advanced Metals and Materials,UST Beijing Beijing 100083, China: General Research Institute for Nonferrous Metals, Beijing 100088, China.;Interface of Spray-Deposited+Rolled Al-Ph/Al/Steel Composite Plate[J];Journal of University of Science and Technology Beijing;2001-04
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 XU Zhi-qiang1,HUANG Yong-jian1,2,LIU Cai1,DU Feng-shan1,SHAO Tao1(1.College of Mechanical Engineering,Yanshan University,Qinhuangdao,Hebei 066004,China; 2.Shijiazhuang Iron & Steel Co.Ltd.,Shijiazhuang,Hebei 050031,China);A Study of Pore Closure in Large Bar Rolling Process Based on Relative Density[J];Transactions of Beijing Institute of Technology;2009-12
2 Zhao Dong;Sun Yanling; Zhao Xiaojin.School of Technology, Beijing For. Univ., 100083, P.R.China.;Computer-aided simulation of plant stalk die compaction processes in cup-shaped mold.[J];Journal of Beijing Forestry University;2002-Z1
3 CHEN Feifeng,YAN Hongge,CHEN Zhenhua,ZHANG Hao,XIA Weijun(College of Materials Science and Engineering,Hunan University,Changsha 410082);Researches on Technology to Improve Crazing Behavior of Spray Deposited Porous Material[J];Materials Review;2007-08
4 CHEN Zhigang CHEN Zhenhua CHEN Ding (College of Materials Science and Engineering,Hunan University,Changsha 410082);Research of Spray Deposition and Subsequent Densification for Its Production[J];Materials Review;2008-05
5 Liu Peisheng (1. The Key Laboratory of Beam Technology and Material Modification of Ministry of Education & Dept. of Materials Science and Engineering, Beijing Normal University, Beijing 100875, China) (2. Beijing Radiation Center, Material Physics Division, Beijing 100875, China);Some Problems on Mechanical Properties of Foamed Metals[J];Rare Metal Materials and Engineering;2004-05
6 MENG Zheng-hua,HUANG Shang-yu,CHANG Hong,HU Shuang-feng(School of Meterial Science and Engiueering,Wuhan University of Technology,Wuhan Hubei 430070,China);Effects of coil and field shaper structure on electromagnetic compaction of ceramic powder[J];Forging & Stamping Technology;2006-04
7 LI Yongzhi1,2 ,YUAN Lejian2 ,YU Shihao21.Jiujiang College, Jiujiang 332005, Jiangxi China; 2.Wuhan University of Technology ,Wuhan 430070, Hubei China;Calculation and Analysis of Gear Powder Forging and Numerical Simulation of its Process[J];;2005-04
8 QIU Jing-wen1,LIU Yong1,LIU Yan-bin1,LIU Bin1,2,WANG Bin1,WANG Yu-lin1,TANG Hui-ping3,WANG Xue-qing1(1.State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China;2.Tohoku University Institute for materials Research,Sendai,Japan;3.Northwest Institute for Nonferrous Metal Research,Xi’an 710016,China);Constitutive equations for hot deformation of Ti-1.5Fe-2.25Mo alloy prepared by powder metallurgy[J];Materials Science and Engineering of Powder Metallurgy;2010-05
9 LI Wei-jie,LIU Yong,LIU Yan-bin,HE Xiao-yu,WANG Bin(State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Deformation behavior of pure titanium powder extruded by single-pass equal channel angular pressing at room temperature[J];Materials Science and Engineering of Powder Metallurgy;2011-01
10 GUO Biao1,GE Chang-chun1,2,ZHANG Sui-cai2,ZHANG Yu2(1.School of Materials Science & engineering,Southwest Jiaotong University,Chengdu 610031,China;2.Institute of Special Ceramics and Powder Metallurgy,School of Materials Science& Engineering,University of Science and Technology Beijing,Beijing 100083,China);POWDER FORGING TECHNOLOGY AND ITS APPLICATION PROGRESS[J];Powder Metallurgy Industry;2011-03
China Proceedings of conference Full-text Database 1 Hits
1 Zhang Tao, Zhao Beijun, Zhu Shifu, Li Kai, Yong Zhihua,He ZhiYu,Chen BaoJun (Department of Material Science, Sichuan University, Chengdu 610064);Application of MSC.Marc in Powder-forming[A];[C];2008
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved