Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Powder Metallurgy Technology》 1992-01
Add to Favorite Get Latest Update


Li Zheng, Li Jian and Cao Yongjia (Central Iron and Steel Research Institute, Beijing 100081, China)  
The article has studied the rheology of feedstock composed of metal with different particle sizes and shapes,and methycellulose based binder during injection moulding.The logarithmic curve of viscosity-shear rate ranging 10y~10~4/s for the feedstock was obtAlNed by using a selfdesigned capillary rheology meter on MTS 880 material testing machine.Factors influencing theology were investigated. The mechanical properties of sintered pieces after injection moulding were studied,thus,parts were manufactured and injection moulding process has been illustrated.
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 chen Xiaogang (Wanli Plastics Products General Works, Hangzhou);SOLUTION OF THE MOULDING TECHNOLOGICAL PROBLEM OF AS BOXES FOR FRUITS AND VEGETABLES USED IN REFRIGERATOR[J];Engineering Plastics Application;1990-01
2 Jia Yi (Tianjin Institute of Light Industry);ELIMINATING THE WELD LINE TO IMPROVE THE QUALITY OF THE INJECTION MOULDING PARTS[J];Engineering Plastics Application;1990-02
3 Fu Yonglin (Nantong Synthetic Material Experimental Factory);DEFECTS OF PC/ABS PLASTIC ALLOY INJECTION MOLDING PRODUCTS ANDPREVENTING MEASURES[J];Engineering Plastics Application;1991-04
4 Lu Ming (Zhongyuan Radio Factory);THE INJECTION MOULDING OF POLYPHENYLENE ETHER SULPHONE[J];Engineering Plastics Application;1992-01
5 Geng Guili (Shandong University of Technology , Jinan 250014);THE CALCULATION OF THE COATING DIE CAVITY OF THE COVERED PLASTIC METALLIC FLEXIBLE CONDUIT[J];Engineering Plastics Application;1996-01
6 Li Yingchun Shen Kaizhi(North China Institute of Technology, Taiyuan 030051) (Sichuan Union Univereit), Chengdu 610065);STUDY ON GATE DEMENTION FOR PS INJECTION MOULD[J];Engineering Plastics Application;1999-03
7 Xie Meihua (Xiamen Overseas Chinese Electronic Co., Ltd., Xiamen 361006, China);EFFECT OF BACK PRESSURE ON INJECTION MOLDING TECHNOLOGY[J];Engineering Plastics Application;2004-07
8 Zhang Han, Ma Wanzhen, Liu Shouji(College of Materials Science and Engineering, Inner Mongolia University of Technology, Huhhot 010062, China);TEST FOR RHEOLOGICAL BEHAVIOUR OF ABS IN EXTRUSION MOLDING[J];Engineering Plastics Application;2005-12
9 ZHOU Yusheng 1,2 , YAN Jiu chun 1, LU Tong 1, YANG Shi qin 1 (1. National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China; 2. Automobile School, Harbin Institute of Technology, Har;The welding process and quality in ultrasonic welding of plastics part III Analysis of effects on welded joint quality[J];MATERIAL SCIENCE AND TECHNOLOGY;1999-S1
10 ZHOU Wei-hua,LIU Bin,WEN Sheng-ping,QU Jin-ping(The Key Laboratory of Polymer Processing Engineering Ministry of Education,National Engineering Research Center of Novel Equipment for Polymer Processing,South China University of Technology,Guangzhou 510640,China);Pressure losses in the packing stage of pulsatiled injection molding[J];Materials Science and Technology;2008-04
Chinese Journal Full-text Database 10 Hits
1 YuJian(Institute of Polymer Science and Engineering, Tsinghua University, Beijing 100084);THE PREPARATION, CHARACTERISTICS AND APPLICATION OF POLYACETAL[J];Engineering Plastics Application;2001-03
2 LI Song lin, QU Xuan hui, LI Yi min, HUANG Bai yun(State Key Laboratory for Powder Metallurgy, Central South University of Technology, Changsha 410083, China);A water soluble binder for metal injection molding[J];MATERIAL SCIENCE AND TECHNOLOGY;1999-04
3 Li Songlin, Huang Baiyun, Qu Xuanhui, Li Yimin (Central South University, Changsha 410083);Influence of Surfactants on Properties of Metal injection Molding(MIM) Feedstock[J];Rare Metal Materials and Engineering;2001-02
4 Li Yimin Qu Xuanhui Huang Baiyun (State Key Laboratory for Powder Metallurgy, 410083, Changsha, China);THE PRESENT STATE AND DEVELOPING TRENDS OF METAL INJECTION MOLDING[J];Materials Science and Engineering of Powder Metallargy;1999-02
5 Li Xinggun Lu Haibo Zhou Jicheng (State Key Laboratory for Powder Metallurgy, Central South University of Technology, Changsha, 410083, China);DEVELOPMENT OF STUDY ON THE BINDER AND DEBINDING IN POWDER INJECTION MOLDING[J];Materials Science and Engineering of Powder Metallargy;1999-03
6 Li Duxin Tang Rong Li Yiming Qu Xuanhui Huang Baiyun (State Key Laboratory for Powder Metallurgy, Changsha, 410083, China);METAL INJECTION MOLDING BINDER AND ITS PROGRESSION[J];Materials Science and Engineering of Powder Metallargy;1999-04
7 CAO Yong jia (Central Iron & Steel Research Institute;Advanced Technology & Materials Co ,Ltd,Beijing 100081,China);THE DEVELOPING OPPORTUNITY AND CHALLENGES OF METAL INJECTION MOLDING[J];Powder Metallurgy Industry;2001-03
8 Gao Li; a Haoran (Guilin Electrical Equipment Scientific Research institute, Guangxi 541004);AN INQUICY INTO EXTRUSION FORMING PROCESS OF TUNGSTEN SKELETON[J];POWDER METALLURGY TECHNOLOGY;1994-02
9 Qu Xuanhui,Yan Hansong,Huang Baiyun(Central South University of Techology,Changsha,410083);Development of Binders for Metal Powder Injection Molding[J];POWDER METALLURGY TECHNOLOGY;1997-01
10 LI Songlin;QU Xuanhui;LI Yimin;HUANG Baiyun(State Key Laboratory for Powder Metallugy, Central South University of Technology, Changsha 410083)Correspondent: QU Xunhui, professor, Tel: (0731)8877404, E-mail. x-nlab@csut.edu.cnManuscript received 1998-10-2;INJECTION MOLDING OF Fe-2Ni WITH POLYETHYLENE GLYCOL-BASED BINDER[J];ACTA METALLRUGICA SINICA;1999-02
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 ZHU Ailan ZHONG Hong (College of Chemistry and Chemical Engineering,Central South University,Changsha,410083);A Study on Metal Powder Injection Melting Binder of Solvent Debinding[J];Materials Review;2002-08
2 ZHU Ai lan,ZHONG Hong (College of Chemistry and chemical engineering,Central South University,Changsha 410083,China);THE STUDY ON METAL POWDER INJECTION MOLDING BINDER OF SOLVENT DEBINDING TYPE[J];Powder Metallurgy Industry;2002-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved