Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Powder Metallurgy Technology》 2010-01
Add to Favorite Get Latest Update

Aspiration pressure varation at the tip of metal delivery tube in the supersonic atomization nozzle

Zhao Xinming1),Xu Jun1),Zhu Xuexin2),Zhang Shaoming1) 1)(National Engineering and Technological Research Center for Non-ferrous Metals Composites, General Research Institute for Non-ferrous Metals,Beijing 100088,China) 2)(Beijing Compo Advanced Technology Co.,Ltd.,Beijing 100088,China)  
The aspiration pressure variation at the tip of metal delivery tube in the supersonic atomization nozzle during gas-only atomization performance had been investigated in this work.Effects of atomization gas pressure P0,jet included angle α,the apex angle β and the protrusion length h of metal delivery tube on aspiration pressure P were measured.The results reveal that the aspiration pressure is subatmospheric under all operating pressures.A general trend is that with increasing atomization gas pressure,the value of aspiration pressure decreases in the range of 0.5~1.5MPa,then increases in the range of from 1.5~3.5MPa,finally decreases again under higher gas pressure (P03.5MPa).The larger the apex angle of metal delivery tube,the greater the aspiration pressure.With the jet included angle α of the nozzle decreasing,the aspiration pressure increases.Only the atomization gas pressure reaches and above 3.23MPa,as the protrusion length increases,the aspiration pressure decreases.
【Fund】: 国家高技术研究发展计划项目资助(2009AA033901)
【CateGory Index】: TF123
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 Wu Hanfeng1,2,3 Lou Chenghua1,2,3 Yao Jianhua1,2,3 Chen Zhijun1,2,3Guo Shirui1,2,3(1Key Laboratory of Special Purpose Equipment and Advanced Processing Technology,Ministry ofEducation,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China2Zhejiang Special Equipment Manufacturing and Aduanced Processing Technology Laboratory,Hangzhou,Zhejiang 310014,China3Research Center of Laser Processing Technology and Engineering,Zhejiang University of Technology,Hangzhou,Zhejiang 310014,China);Design of Atomizing Nozzle for Laser Cladding Alloy Powder[J];Laser & Optoelectronics Progress;2011-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 V.Erukhimovitch and J.Baram(Materials Engineering Department, Ben-Gurion University of Negev, Beer-Sheva, Israel);Analysis of Solidification in Spray Atomized and Codeposited Metal-matrix Composites Part Ⅰ: Atomization[J];材料科学技术(英文版);1995-02
2 He Shiwen1,2,Liu Yong2,Guo Sheng2 (1. Hunan University of Technology,Zhuzhou 412000,China) (2. State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Cooling Rate Calculation of Non-Equilibrium Aluminum Alloy Powders Prepared by Gas Atomization[J];Rare Metal Materials and Engineering;2009-S1
3 SI Chao-run;WANG Jun-biao;ZHANG Xian-jie;YUAN Shuai;Shannxi Engineering Research Center for Digital Manufacturing Technology,Northwestern Polytechnical University;School of Mechanical Engineering, Northwestern Polytechnical University;;Effect of atomizer structures on gas flow field in supersonic atomization[J];Materials Science and Engineering of Powder Metallurgy;2014-03
4 Aruna Tomar;Rashmi Mittal;Devendra Singh;Department of Metallurgical and Materials Engineering,Indian Institute of Technology Roorkee;;Strength and elongation of spray formed Al–Si–Pb alloys[J];矿物冶金与材料学报(英文版);2014-12
5 ZHAO XinMing1, XU Jun1,2 , ZHU XueXin1 & ZHANG ShaoMing1 1 National Engineering and Technological Research Center for Non-Ferrous Metals Composites, General Research Institute for Non-Ferrous Metals, Beijing 100088, China; 2 Beijing COMPO Solder Co. Ltd., Beijing 100088, China;Effect of atomization gas pressure variation on gas flow field in supersonic gas atomization[J];中国科学(E辑:技术科学)(英文版);2009-10
6 Zhao X M,Xu J,Zhu X X,et al.;Effect of atomization gas pressure variation on the gas flow field in supersonic gas atomization[J];Science in China(Series E:Technological Sciences);2009-09
7 SHEN Jun;CUI Chengsong;JIANG Zuling;LI Qingchun Harbin Institute of Technology;PRESSURE CHARACTERISTICS AT TIP OF METAL DELIVERY TUBE IN GAS ATOMIZATION[J];Acta Metallrugica Sinica;1993-01
8 Chao-Run Si,Xian-Jie Zhang,Jun-Biao Wang,Yu-Jun Li (Shannxi Engineering Research Center for Digital Manufacturing Technology,Northwestern Polytechnical University,Xi’an 710072,China);Design and Atomization Characteristic of Laval-style Annular Slot Nozzle[J];哈尔滨工业大学学报(英文版);2013-03
9 ZHAO Xinming, XU Jun, ZHU Xuexin, and ZHANG Shaoming National Engineering and Technological Research Center for Non-ferrous Metals Composites, General Research Institute for Non-ferrous Metals, Beijing 100088, China;Effect of closed-couple gas atomization pressure on the performances of Al-20Sn-1Cu powders[J];稀有金属(英文版);2008-04
10 LI Zheng-dong,ZHANG Guo-qing,LI Zhou,ZHANG Yong,XU Wen-yong(National Key Laboratory of High Temperature Structural Materials,Beijing Institute ofAeronautical Materials,Beijing 100095,China);Simulation of Gas Flow Field in Laval Nozzle and Straight Nozzle for Powder Metallurgy and Spray Forming[J];钢铁研究学报(英文版);2008-06
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 CHEN Qingjun,FAN Hongbo,SUN Jianfei,SHEN Jun (Harbin Institute of Technology,Harbin Heilongjiang 150001,China);INVESTIGATION ON THE ATOMIZATION CHARACTERISTICS OF FREE ATOMIZER[J];Powder Metallurgy Industry;2003-04
2 Ouyang Hongwu,Chen Xin,Yu Wentao,Huang Baiyun (State key lab for Powder Metallurgy, Central Southern University, Changsha 410083,China);Progress and prospect on the gas atomization[J];Powder Metallurgy Technology;2007-01
3 Shen Jun; Jiang Zuling; Zeng Songyan and Li Qingchun (Harbin Institute of Technology, Harbin 150001);PRESSURIZATION AND ASPIRATION PHENOMENA IN PROCESS OF GAS ATOMIZATION[J];POWDER METALLURGY TECHNOLOGY;1994-01
4 Zhao Maiqun (Xi'an University of Technology,Shanxi 730074);Aerodynamic Analysis on Unlimited Atomiser[J];POWDER METALLURGY TECHNOLOGY;1997-02
5 ZHU Zi xin(State Key Laboratory of Remanufacture Technology,Armored Force Engineering Institute,Beijing 100072,China),XU Bin shi,LIANG Xiu bing,DU Ze yu.;Numerical Simulation and Measurement of Droplet Velocity During High Velocity Arc Spraying[J];Transactions of The China Welding Institution;2002-01
6 CHEN Ping,LIU Fu-ping(Guangzhou Research Institute of Nonferrous Metals,Guangzhou 510651,China);Improvement of the Atomizer Used for producing Metal Powder[J];Metal Materials and Metallurgy Engineering;2009-04
7 Li Chunyan 1 Zhang Song 1,2 Kang Yuping 1 Liu ChangSheng 2 ( 1School of Materials Science and Engineering,Shenyang University of Technology,Shenyang 110023);Comment on material system for laser cladding[J];Laser Journal;2002-03
8 SUN Rong lu GUO Li xin DONG Shang li YANG De zhuang (School of Material Science and Engineering, Harbin Institute of Technology, Harbin 150001);Study on Microstructure of Laser-clad NiCrBSi-TiC Coating on the Surface of Titanium Alloy[J];Chinese Journal of Lasers;2001-03
9 SI Song hua, YUAN Xiao min, HE Yi zhu 1Research Center for Laser Processing, Anhui University of Technology, Maanshan 243002 2Department of Materials Science and Engineering, The Changwon National University, 9 Sarim dong, Changwon, 641;Microstructures and Properties of Laser Clad Ni-based Metal-ceramics Layers[J];Chinese Journal of Lasers;2002-08
10 WANG Wen-li,CHAO Ming-ju,WANG Dong-sheng,WANG Zheng,LIANG Erjun(Key Laboratory of Material Physics of Ministry of Education,Physical Science & Technology College,Zhengzhou University,Zhengzhou,Henan 450052,China);Investigation on In-Situ Synthesis of TaC Particulate Reinforced Ni-Based Composite Coatings by Laser Cladding[J];Chinese Journal of Lasers;2007-02
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 YAO Jian-hua1,2,LI Chuan-kang1,2(1.Key Laboratory of E&M,Ministry of Education & Zhejiang Province,Zhejiang University of Technology,Hangzhou 310014,China;2.Research Center of Laser Processing Technology and Engineering,Zhejiang University of Technology,Hangzhou 310014,China);Research and application of laser surface strengthening and remanufacturing technology[J];Electric Welding Machine;2012-05
2 Zhang Qunli;Xu Weixian;Yao Jianhua;Chen Zhaoyang;Ma Chunan;Research Center of Laser Processing Technology and Engineering,Zhejiang University of Technology;College of Chemical Engineering,Zhejiang University of Technology;;Microstructure and High Temperature Wear Resistance Performance of Co/Mesoporous WC Laser Composite Coating[J];Chinese Journal of Lasers;2014-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved