Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《China Powder Science and Technology》 2006-04
Add to Favorite Get Latest Update

Design of High Precision Measuring Apparatus for Stopping Angle of Powder

LIU Rui ZHAO Xu-guang ZHAO San-yin CAI Xi-chun (School of Chemical and Environmental Engineering,Shaoguan University,Shaoguan 512005,China)  
Powder's stopping angle (PSA) is an important performance factor about powder's mechanics,but its measured data generally shows a large undulation with traditional measuring method.In order to solve the problems,a new improved measuring apparatus of PSA was designed and made.The new apparatus added a high-speed spinning brash to predisperse measured powder before it falls.So it could avoid the aggregation of particles and decrease the vibration and shock forces caused by the falling powder effectively.A rounded platform was set under powder funnel to limit the dimension of powder's cone.Two series of steel slag with different fineness were used in contrasting tests between the new and traditional apparatus.The results indicated that the new apparatus,with a simple structure,had higher measuring speed and measuring accuracy than traditional apparatus,and RSD was decreased from 5.61% to 1.73%.
【Fund】: 韶关市科委2000年重大应用研究项目,编号:韶市科字(2000)50号。
【CateGory Index】: TB44
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 ZHAO Xu-guang, ZHAO San-yin, WEN Zi-yun (School of Materials Science and Engineering, South China University of Technology , Guangzhou 510640; Department of Chemistry, Shaoguan College, Shaoguan 5 \ 2005, China);Characteristics of Ground Granulated Blast Furnace Slag Particles[J];China Powder Science and Technology;2004-01
2 ZHAO Xu-guang 1,2 ,ZHAO San-yin 1,2 ,WEN Zi-yun 1,YU Qi-jun 1, HAN Zhong-qi 3,DI Dong-ren 3,CHAI Xing-teng 3 (1.School of Materials,South China University of Technology,Guangzhou 510640,China;2.Department of Chemistry,Shaoguan College,Shaoguan 512053,China;3.Tianjin Cement Industry Design and Research Institute, Tianjin 300400,China);The Comparative Research on the Basic Characteristics of Blast-furnace Slag Powders Prepared with Different Grinding Systems[J];Journal of Wuhan University of Technology;2003-11
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 MA Yan-jie,QIAN Jing;Numerical Simulation of the Cement-sand Mix Flow in a Storage Hopper[J];Packaging and Food Machinery;2008-04
2 WANG Yan-min1 MENG Ying-feng1 LI Gao1 YAN Jian-hua2 LI Yong-jie1 LIN Tie-jun1 JU La-ti3(1.State Key Laboratory of Oil and Gas Geology and Exploration,Southwest Petroleum University,Chengdu 610500;2.ChuanXi Drilling Company,Chuanqing Drilling Engineering Company,CNPC,Guanghan 618300;3.The Fourth Company 50602 Team Karamy,West Drilling Company,Karamay 834000);Annular Carrying Cutting Study on Gas Drilling of Water Bearing Formation[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2008-04
3 HAN Chun-yu1 LONG Gang2 JI Hai-peng1(1.Changqing Petroleum Exploration Bureau,Xi'an 710061;2.Engineering Technology Research Institute of Southwest Oil-gas Branch,SINOPEC,Deyang 618000);Dynamics Analysis of Cutting on Gas Drilling[J];Journal of Chongqing University of Science and Technology(Natural Sciences Edition);2008-06
4 YAN Zhi-yong~1,GAO Xiang~2,LUO Zhong-yang~2(1.China Jiliang University,Hangzhou 310018,China;2.State Key Lab of Clean Energy Utilization,Zhejiang University,Hangzhou 310027,China);Preparation of Integral Type V_2O_5-WO_3-MoO_3/TiO_2 Catalyst[J];Journal of Power Engineering;2008-05
5 Zhou Shengbo1,Jiang Fenghua1,2,Hou Xinkai1(1 College of Material Science && Engineering,Xi`an University of Architecture && Technology,Xi`an 710055,China ;2 College of Material Science && Engineering,Jinan University,Jinan 250022,China);Blast furnace slag powder by different grinding methods affecting cement property[J];;2006-01
6 LI Fei-zhou1,2,LI Hong-chuan2,LI Xin-bo2(1.Baoji University of Art and Sciences,Baoji 721006,China;2.School of Engineering Machinery,Chang’an University,Xi’an 710064,China);Effect of pore-forming agents content on bending strength of SiC/Al composites[J];Materials Science and Engineering of Powder Metallurgy;2007-04
7 LI Qi-hou,HUANG Yi-ling,WANG Hong-jun,LIU Zhi-hong,YANG Tian-zhu(School of Metallurgical Science and Engineering,Central South University,Changsha 410083,China);Inquiring into dispersion mode of ultra-fine particles with grain size small than 2 μm[J];Materials Science and Engineering of Powder Metallurgy;2007-05
8 Li feizhou Li hongchuan (Chang'an University Xi'an 710064);Effect of Pore-making Agents Content on Porosity of Porous Preform[J];Foshan Ceramics;2006-07
9 LI Yun1,CHEN Shi1,XIE Hong-yong2,SHAO Yong3( 1 .Department of Power Engineering ;2 .School of Chemical Engineering ,Dalian University of Technology ,Dalian 116024;3.Information Processing Department,Dalian Ganjingzi Credit Cooperative,Dalian 116000,China);Comparation of Several Turbulent Models in Simulation of Turbulent Diffusion Combustion[J];China Powder Science and Technology;2005-04
10 LI Yun1, CHEN Shi1, XIE Hong-yong2( 1 . Departement of Engineaering Power ; 2 .School of ChemicalEngineering , Dalian University of Technolnology , Dalian 116024, China);Simulation of Dilution Effect Caused by Radial Eddy Dispersion in Process of Nanoparticle Coagulation in Flame[J];China Powder Science and Technology;2006-02
China Proceedings of conference Full-text Database 1 Hits
1 Sun Chenglin Lian Qinming Wang Qingfa ( Yifeng Comminution Comminution Machinery Co. , Ltd);Status of China's Powder Industry in 2004[A];[C];2005
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 WENG You fa 1,ZHANG Dong 2 (1 Scicntific Research Institute of CHEC Third Navigationl Eng.Bureau,Shanghai 200032; 2 National Key Laboratory for Concrete Material at Tongji University,Shanghai 200092);Effect of Fineness of Slag on Property of High Strength Concrete[J];CHINA HARBOUR ENGINEERING;2000-03
2 Wu Junliang Xu Yingzi(Yixing Ceramics Industry Design & Research Intitute 214221);Studies of Ceramic Powder Silo Design[J];JIANGSU CERAMICS;1998-02
3 Zhao Xuguang Shaoguan University, Shaoguan 512005;The active effect and influence of grinding aids on the rheological behavior of ground mineral powders[J];Refractories;1999-03
4 Zhang Yaojin Chen Xiang Tao Wenjian Department of materials science and Engineering,Nanjing University of Chemical Technology,Nanjing, 21009, China;HOMOGENIAING POWDERED MATERIAL WITH GRAVITATIONAL FLOW HOMOGENIZER[J];JOURNAL OF NANJING UNIVERSITY OF CHEMICAL TECHNOLOGY;1998-02
5 ;水泥和粉煤灰中重金属和有毒离子的溶出问题及思考[J];Cement;2003-01
6 Wang Zhongchun et al;Slag Fine-grinding Technology[J];Cement Technology;2001-04
7 KONG De yu (Inst. of Civil Eng., Zhejiang Univ. of Technology, Hangzhou 310014, China);Improvement of Measuring Bulk Density of Powder and Its Application[J];LABORATORY RESEARCH AND EXPLORATION;2000-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved