Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Mechanics》 2013-09
Add to Favorite Get Latest Update


SHEN Guo-hui;CHEN Zhen;GUO Yong;XING Yue-long;SUN Bing-nan;Department of Civil Engineering,Zhejiang University;Electric Power Design Institute of Zhejiang Province;  
Finite element simulations and full-scale experiments are employed to study the bearing capacity of cross-shaped tubular joints with reinforced plate under brace compression.The results obtained from the two methods are compared and numerical method to simulate the buckling of the tubular joint is investigated.The influence of the penetration of the reinforced plate into the chord tube on the bearing capacity is studied.Then the results obtained from simulation and experiments are compared with those calculated using the equations provided by the Codes.Results show that the final failure mode of cross-shaped tubular joint with reinforced plate under brace compression is the out-of-plane instability of circular plate.It is reasonable to set the maximum initial imperfection displacement to be 0.001 times of the diameter of the chord tube,so as to simulate the buckling of joints through finite element simulation.The technique of the reinforced plate penetrating into the chord tube can improve the displacement stiffness and the bearing capacity of the joint.
【Fund】: 国家自然科学基金项目(51178425);; 浙江省电力公司科技项目(ZDK025-2011 ZDK088-2011)
【CateGory Index】: TU392.3
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 7 Hits
1 QIAN Peng1,2, YE Lie-ping1,2 , FENG Peng1,2 (1. Department of Civil Engineering, Tsinghua University, Beijing 100084, China) (2. Key Laboratory of Structural Engineering and Vibration of China Education Ministry, Tsinghua University, Beijing 100084, China);ELASTO-PLASTIC BUCKLING BEHAVIOR OF CFRP-ALUMINUM COMPOSITE PIPE UNDER AXIALLY COMPRESSIVE LOAD[J];Engineering Mechanics;2006-S2
2 BAO Kanyuan1 , SHEN Guohui1 , SUN Bingnan1,2 , YE Yin3 , YANG Lixian1 (1. Department of Civil Engineering, Zhejiang University, Hangzhou, 310027, China; 2. Ningbo Institute of Technology, Ningbo, 315100, China; 3. Zhejiang Electric Power Designing Institute, Hangzhou 310007, China);EXPERIMENTAL STUDY AND THEORETICAL ANALYSIS OF ULTIMATE STRENGTH OF STEEL TUBULAR K-JOINTS OF TALL TOWERS[J];Engineering Mechanics;2008-12
3 LIU Hong-jun1 , LI Zheng-liang1 , LI Mao-hua1,2 (1. Department of Civil Engineering, Chongqing University, Chongqing 400044, China; 2. China Electric Power Research Institute, Haidian District, Beijing 100055, China);STUDY OF ULTIMATE STRENGTH OF STEEL TUBULAR JOINT WITH ANNULAR RIBBED PLATE OF TRANSMISSION TOWERS[J];Engineering Mechanics;2010-10
4 ZHUO Yi1,2,LI Zhong-xian1,2(1.School of Civil Engineering,Tianjin University,Tianjin 300072,China;2.Key Laboratory of Coast Civil Structures Safety,Tianjin 300072,China);A PRACTICAL SIMULATION PLATFORM OF REINFORCED CONCRETE FIBER BEAM-COLUMN ELEMENT[J];Engineering Mechanics;2011-04
5 SHEN Guo-hui1,CHEN Zhen1,GUO Yong2,XING Yue-long2,PAN Feng2,SUN Bing-nan1(1.Department of Civil Engineering,Zhejiang University,Hangzhou 310058,China;2.Electric Power Design Institute of Zhejiang Province,Hangzhou 310007,China);FINITE ELEMENT SIMULATION METHODS APPLIED TO BOLTED GUSSET PLATES USED AS SHEAR CONNECTORS[J];Engineering Mechanics;2013-01
6 Bai Qiang1,Zeng Desen1,Shu Aiqiang1,Li Zhengliang2(1 Central Southern China Electric Power Design Institute,Wuhan 430071,China; 2 Department of Civil Engineering,Chongqing University,Chongqing 400044,China);Analysis on strength of tube-gusset joints in steel tubular tower with annular ribbed plate[J];Building Structure;2012-02
7 GUO Bing1, 2 (1. Shandong Institute of Architecture and Engineering, Ji'nan 250014, China; 2. Tsinghua University, Beijing 100084, China)$$$$;The buckling and stability calculation of single angle compression members[J];Journal of Building Structures;2004-06
Chinese Journal Full-text Database 10 Hits
1 GUO Xiao-nong,SHEN Zu-yan (Building Structure Department of Tongji University,Shanghai200092,China);Analysis of stability of single-layer spherical reticulated shells with semi-rigid joints[J];Building Science Research of Sichuan;2004-03
2 CHANG Yuzhen,WU Minzhe(School of Civil Engineering,Xi'an University of Architecture and Technology,Xi'an 710055,China);Geometrical nonlinear analysis of composite shell[J];Sichuan Building Science;2006-05
3 KANG Ju1,SONG Zhensen2(1.Department of Civil Engineering,Ningxia University,Yinchuan 750021,China;2.Department of Civil Engineering,Shanghai Jiaotong University,Shanghai 200240,China);The influence of joint stiffness on the stability of geodesic single-layered reticulated shells with initial imperfection[J];Sichuan Building Science;2008-01
4 WANG Zhuo1,YAN Weiming2,SHAO Yunda1(1.China Central Radio & TV University,Beijing 100031,China; 2.Beijing Laboratory of Earthquake Engineering and Structural Retrofit,Beijing University of Technology,Beijing 100124,China);Analysis on the influence of initial geometrical imperfections on linear dynamic response of reticulated shell structures[J];Sichuan Building Science;2011-02
5 YANG Zhong,XU Yun,CHEN Xujun,ZHANG Wenxu(College of Civil Engineering and Urban Construction,Jiujiang 332005,China);The 3-dimension seismic response analysis of reticulated shell[J];Sichuan Building Science;2012-01
6 WANG Zhuo(College of Engineering,the Open University of China,Beijing 100031,China);Validity analysis on curvature modal method for damage localization to reticulated shell structures[J];Sichuan Building Science;2012-03
7 CHEN Dong(Department of Civil Engineering,Anhui university of architecture,hefei 230001,China);Research of limit load probability distribution of single-layer spherical reticulated shell with imperfections[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2011-03
8 Ma Qi (Anhui Institute of Building Research & Design, Hefei 230001, China);Structural Analysis and Design of Jinzhai Theater's Shell Roof[J];Anhui Architecture;2008-06
9 HE Guang-ling(Deparrment of Building Engineering,Tongji University,Shanghai 200092,China);Determination of Critical Thickness of Stiff Roof in Coal Mine Based on Thick Plate Theory[J];Chinese Journal of Underground Space and Engineering;2009-04
10 BAI Yin1,SHI Yong-jiu2,WANG Yuan-qing2(1.School of Transportation Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100191,China;2.Key Laboratory of Structural Engineering and Vibration of China Education Ministry,Tsinghua University,Beijing 100084,China);Elasto-plastic Stability Bearing Capacity Calculation for K8 Single-layer Reticulated Shells under Fire Conditions[J];Journal of Beijing University of Technology;2011-03
China Proceedings of conference Full-text Database 10 Hits
1 Tang Gan1,2,Guo Xiao-ming1,Lian Lan-ying2,Che Shen-si2(1.School of Civil Engineering,Southeast University,Nanjing 210096,China 2.Department of Civil Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Intelligent control of advanced stochastic imperfections method for stability analysis of lattice shells[A];[C];2010
2 FAN Wen~(①②) YU Maohong~①LIN Yongliang~②CHEN Liwei~②WU Lihui~②(①School of Civil Engineering and Mechanics,Xi'an Jiaotong University,Xi'an 710049)(②School of Geological Engineering and Surveying Engineering,Chang'an University,Xi'an 710054);ANALYSIS OF THE SLIP LINES FOR LIMITED BEARING CAPACITY OF THE SHALLOW STRIP FOUNDATION BASED ON THE UNIFIED STRENGTH THEORY[A];[C];2002
3 ;截面为三角形的空间格构式刚架体系的平面外整体稳定性能的研究[A];[C];2000
4 Wang Liankun Hao Jiping Li Wenling Chen Hongying Shi Jing Zhang Junfeng (Xi’an University of Architecture and Technology, Xi’an 710055);State of Art of Advanced Analysis Theories for Steel Structure[A];[C];2004
5 Gu Rongyong Shu Ganping (College of Civil Engineering, Southeast University, Nanjing 210096);Stability Analysis Of Circular Arc[A];[C];2008
6 Zhang Zheng,Ding Jiemin, He Zhijun (Architecture Design & Research Institute of Tongji University, Shanghai 200092, Ching);Main Characteristics and Key Technical Problems of Hybrid - string Structure in Large - span Structures[A];[C];2006
7 Wu Bing,Meng Meili,Fu Xueyi,Zhang Jian,Sun Can,Feng Yewen,Lin Jiangang (The Institute of Architecture Design & Research Shenzhen University,Shenzhen 518060,China);Structure Design of Pingshan Basketball Gymnasium for Universidad 2011 Shenzhen[A];[C];2009
8 Meng Meili~1,Sun Can~2,Wu Bing~1,Fu Xueyi~1,Zhang Jian~1,Feng Yewen~1,Lin Jiangang~1 (1 The Institute of Architecture Design & Research,Shenzhen University,Shenzhen 518060,China; 2 Shenzhen Graduate School,Harbin Institute of Technology,Shenzhen 518055,China);Stability Analysis of Prestressing Suspend Dome of Basketball Center for Universiade Shenzhen 2011[A];[C];2009
9 He Hucheng,Zhou Xia,Wang Hongxi,Zhang Xiangji (Center for Eng.Design and Research under the General Equipment Department,Beijing 100028,China);Stability Analysis of Net Shell Structure for Shanghai Sheshan Forest Theater[A];[C];2009
10 Shen Xiaoming,Shu Ganping (College of Civil Engineering,Southeast University,Nanjing 210096);Stability Analysis of Single Layer Lattice Shell With Irregular Division[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 NIE Li-ying1,2 , LI Jian-zhong1 , FAN Li-chu1 (1. Tongji University, Department of Bridge Engineering, Shanghai 200092, China; 2. Lanzhou Railway University, School of Civil Engineering and Architecture , Gansu Lanzhou 730070, China);ELASTIC-PLASTIC FIBER BEAM-COLUMN ELEMENT AND ITS PARAMETRIC ANALYSIS[J];Engineering Mechanics;2004-03
2 YU Shi-ce1 , SUN Bing-nan1 , Ye Yin2 , YING Jian-guo2 (1.Department of Civil Engineering, Zhejiang University, Hangzhou, 310027,China; 2.Zhejiang Electric Power Designing Institute, Hangzhou 310000,China);EXPERIMENTAL STUDY AND THEORETICAL ANALYSIS OF ULTIMATE STRENGTH FOR STEEL TUBULAR JOINT OF TALL TOWERS[J];Engineering Mechanics;2004-03
3 YE Lie-ping, LU Xin-zheng, MA Qian-li, WANG Xun-liu, MIAO Zhi-wei (Department of Civil Engineering, Tsinghua University, Beijing 100084, China);NONLINEAR ANALYTICAL MODELS, METHODS AND EXAMPLES FOR CONCRETE STRUCTURES SUBJECT TO EARTHQUAKE LOADING[J];Engineering Mechanics;2006-S2
4 BAO Kanyuan1 , SHEN Guohui1 , SUN Bingnan1,2 , YE Yin3 , YANG Lixian1 (1. Department of Civil Engineering, Zhejiang University, Hangzhou, 310027, China; 2. Ningbo Institute of Technology, Ningbo, 315100, China; 3. Zhejiang Electric Power Designing Institute, Hangzhou 310007, China);EXPERIMENTAL STUDY AND THEORETICAL ANALYSIS OF ULTIMATE STRENGTH OF STEEL TUBULAR K-JOINTS OF TALL TOWERS[J];Engineering Mechanics;2008-12
5 Gu Zhengwei Sun Bingnan Tong Genshu (Zhejiang University Hangzhou 310027) Xu Hecai (Zhejiang Industrial Design Institute Hangzhou 310000);3D NONLINEAR FINITE ELEMENT ANALYSIS OF BOLTED-ANGLE STEEL CONNECTIONS[J];Steel Construction;2003-02
6 Kuang Zhenbin Sun Bingnan Gu Zhengwei (Dept.of Civil Engineering,Zhejiang University Hangzhou 310027);3-D NONLINEAR FINITE ELEMENT ANALYSIS OF EXTENDED END-PLATE CONNECTION[J];Steel Construction;2004-02
7 Qian Peng Ye Lieping(Department of Civil Engineering,Tsinghua University Beijing 100084) Weng Guanqun(Taiwan Juhan Technology Co.,Ltd);EXPERIMENTAL STUDY ON CFRP TUBES UNDER UNIAXIAL LOADING[J];Industrial Construction;2004-04
8 Guo Jian(College of Civil Engineering,Fuzhou University Fuzhou 350002)Sun Bingnan(Department of Civil Engineering,Zhejiang University Hangzhou 310027);THE WHOLE COURSE ANALYSIS OF FAILURE BEHAVIOR OF TUBE-GUSSET JOINT IN STEEL TUBULAR TOWER[J];Industrial Construction;2006-12
9 Li Kaixi Xiao Yunhui Nao Xiaofeng Cui Jia Zhu Wen;COLUMN CURVES FOR STEEL COMPRESSION MEMBER[J];Journal of Chongqing Architecture University;1985-01
10 CHENG Rui1,HUANG Zongming1,SUN Bixiang2,CUI Jia1(1.College of Civil Engineering,Chongqing University,Chongqing 400045,China;2.CDTI Engineering Corporation,Chongqing 400039,China);Experimental study and design of compressive behavior of gusset plates connected with single angle members[J];Journal of Building Structures;2009-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved