Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Engineering Mechanics》 2013-09
Add to Favorite Get Latest Update

ALGORITHM RESEARCH ON CONTACT PRESSURE AND MAGNITUDE OF INTERFERENCE FOR MULTI-LAYER CYLINDER'S INTERFERENCE FIT

WANG Jian-mei;TAO De-feng;HUANG Qing-xue;KANG Jian-feng;TANG Liang;State Key Laboratory Cultivation Base for Metallurgical Equipment Design and Technology,Taiyuan University of Science and Technology;  
In order to provide theoretical basis for the design of wind turbine's shrink disk,the calculating formula of contact pressure and magnitude of interference for interference fit of multi-layer cylinder has been deduced based on the displacement expression of thick-walled cylinder under uniform pressure.Two-dimensional axisymmetric model was established by using the finite element software ABAQUS with the dimensions of some type wind turbine's shrink disk,which was designed based on the calculating formula above,and the dynamicallysimulated interference assembly was carried out.The results of contact pressure on the mating surfaces by both methods were discussed,and the errors between the two methods were analyzed.The results show that the results by analytical formulas agree well with those by finite element method and can provide theoretical guidance to the optimization design of wind turbine's shrink disk.
【Fund】: 国家基础研究计划项目(2012CB722801);; 国家青年科学基金项目(51205269)
【CateGory Index】: TH131.7
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 8 Hits
1 ZHANG Hong-wu,LIAO Ai-hua,WU Chang-hua(State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Dalian University of Technology,Dalian 116024,China);STUDY ON ELASTOPLASTIC FRICTIONAL CONTACT PROBLEM IN INTERFERENCE FITS OF COMPRESSORS[J];Engineering Mechanics;2007-01
2 YUAN Ge-xia1,2,LIU Hong-zhao1,WANG Zhong-min1(1.School of Mechanical & Precision Instrument Engineering,Xi'an University of Technology,Xi'an 710048,China;2.Mechanical and Electrical Institute,Baoji University of Arts and Sciences,Baoji 721007,China);OPTIMUM DESIGN OF COMPOUND CYLINDERS WITH SINTERED CARBIDE INNER LINER UNDER ULTRAHIGH PRESSURE[J];Engineering Mechanics;2011-01
3 Qian Jiade(Wuhan Institute of Textile Science and Technlogy);THE SIMPLIFY OF THE FEM ANALYSIS OF THE MUTI-LAYER COMPOSITE CYLINDERS[J];Engineering Mechanics;1989-04
4 Sahanghai Railway University,Shanghai,China) Xu Xiaoqiang Zhao Honghun;Nonlinera FEM Analysis of the Contact Stress on Interference Fitting surfaces[J];MACHINE DESIGN AND RESEARCH;2000-01
5 WEI Yan-gang (Department of Mechanical Engineering, Dalian Railway Institute, Dalian 116028, China);Research on stress analysis and contacting edge effect for interference fit joint of hub[J];Journal of Machine Design;2004-01
6 HE Zhang-tao1,DU Jing1,HE Yu-lin1,CHANG Hui-ying2,FENG Bo1(1.The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400030,China;2.Guodian United Power Technology Co.Ltd.,Beijing 100044,China);Strength analysis of taper-lock connection in MW graded wind turbine spindle[J];Journal of Machine Design;2011-05
7 YANG Guangxue1 XIE Jilong1 LI Qiang1 SHI Changwei2(1.Engineering Research Center of Structure Reliability and Operation Measurement Technology of Rail Guided Vehicles of Ministry of Education,Beijing Jiaotong University,Beijing 100044;2.Beijing Institute of Structure and Environment Engineering,Beijing 100076);Key Parameters of Fretting Damage under Shrink Fit[J];Journal of Mechanical Engineering;2010-16
8 Zhang Qian Shanghai Railway University, Shanghai 200042;Metrix Equation in Multi element Interference Fit Analysis[J];JOURNAL OF LIAONING UNIVERSITY((NATURAL SCIENCE EDITION));1998-01
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 CHEN Lin-zhi,LI Zhang-zheng(School of Architecture and Environment,Sichuan University,Chengdu 610065,China);Analytical solution of shear wall subjected to lateral loads[J];Sichuan Building Science;2006-03
2 GUAN Pinwu1,TANG Guobin1,2,WANG Liping1,MENG Huiying1,YU Lei1 (1.College of Civil Engineering,Zhengzhou University,Zhengzhou 450002,China;2.College of Architecture and Civil Engineering,Zhejiang University,Hangzhou 310027,China);Research on the cast-in-situ concrete hollow floor in the method of constructional orthotropic plate[J];Sichuan Building Science;2008-06
3 LIU Shu-lun,XUE Jiang-hong(College of Science and Engineering,Jinan University,Guangzhou 510632);Deformation in rectangular plates with a stress-concentrating circular hole[J];Journal of Anhui Institute of Architecture & Industry(Natural Science);2011-04
4 Hao Xing,Yuan Weizheng,Chang Honglong,Niu Haobin,Jiao Wenlong(Micro and Nano Electromechanical Systems Laboratory,Northwestern Polytechnical University,Xi′an 710072,China);System-Level Modeling Method of Variable Cross-Section Beams[J];Micronanoelectronic Technology;2010-08
5 HAN Jian-jun,ZHANG Wei-dong,SUN Jun-ying(Iron-making Plant of Steel Union Co.Ltd.of Baotou Steel(Group)Corp.,Baotou 014010,Nei Monggol,China);Successful Replacement from Bell-less Top Gearbox to BG-Type Hydraulic Distributor of Baotou Steel[J];Science & Technology of Baotou Steel(Group) Corporation;2009-04
6 WANG Jie-hua;Processing of Radiator of Conical Mould of Picture Tube[J];Glass & Enamel;2009-03
7 WANG Jie-hua;An Approach to Assembling Cone Mould for Picture Tube[J];Glass & Enamel;2009-05
8 Huang Wenyao,Yan ShilongDept.of Chemical Engineering,Anhui University of Science and Technology(Anhui,232001)Lu Shuran,Kang DahaoBeijing Kelang Oil Technology Ltd.Co.(Hebei,072751)Feng Yide,Chen ShuanghuaHenan Geophysical Survey Team(Henan,460000);The Research and Application of the Low Detonation Velocity and Elongated Source Charge[J];Explosive Materials;2005-04
9 TAO Bo~ 1,2 , NAI Lei~3,WU Fa-quan~4,GUO Gai-mei~1,CHAI Jian-feng~4 1.Geology Construction Engineering Group Corporation of Guangdong Province,Guangzhou 510080,China 2.Faculty of Natural Resources and Information Technology, China University of Petroleum,Beijing 102249,China 3. College of Construction Engineering, Jilin University, Changchun 130026,China 4. Institute of Geology and Geophysics, Chinese Academy of Science, Beijing 100029,China;The Effect Imposed on AntiSlide Pile by the Static Lateral Pressure[J];Journal of Jilin University(Earth Science Edition);2006-05
10 YIN Xin-sheng,et al.(College of Civil Engineering,Jilin Architectural andCivil Engineering Institute,Changchun 130021,China);The study on behavior of reinforced concrete structure of the cable-beam system considering the constraints under the influence of support abutment[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2009-01
China Proceedings of conference Full-text Database 5 Hits
1 QIN Shang-song~(1,2),LI Zhu~1,WANG Hong~3,LIU Yuan-zhen~1 (1.Department of Civil Engineering,Taiyuan University of Technology,Taiyuan 030024,China; 2.Datong Economic and Technological Development Zone Construction Development,Datong 037310,China; 3.Beris engineering and research corporation,Baotou 014010,China);TEMPERATURE EFFECTS IN WALLS ON DIFFERENT THERMAL INSULATION PLACEMENTS WITH THERMAL INSULATION MORTAR[A];[C];2010
2 Lv Zhiyong~1 Zhao Jingyun~2 (1.Laiwu Steel Corporation,Laiwu,271126;2.University of Science and Technology Beijing, School of Mechanical Engineering,USTB.,Beijing,100083);The Effect of Interference Amount Between Coupling and Axis of Straightening Roller in the Aspect of the Stress[A];[C];2009
3 LI Tao ZUO Zheng-xing LIAO Ri-dong School of Mechanical and Vehicular Engineering;Beijing Institute of Technology;Beijing 100081;Error Parameter Study for Structure Simulation of Internal-combustion Engine[A];[C];2007
4 ZHENG An-jie~1 ZHANG Xiao-min~2 WU Zu-lie~3 (1.Chongqing University of Science and Technology,Chongqing 400042,China; 2.Chongqing University,Chongqing 400044,China; 3.Chongqing Jiaotong University,Chongqing 400020,China);Buffer Principle of Sandwich Beams in Packing Case[A];[C];2007
5 Wu Xin1,2;Liu Changwu1,3 (1.State Key Laboratory of Hydraulics and Mountain River Engineering,Sichuan University,Chengdu 610065,China;2.Institute of Technology,Sichuan Normal University,Chengdu 610101,China; 3.College of Hydraulic and Hydroelectric Engineering,Sichuan University,Chengdu 610065,China);Evaluating the Proneness of Coal Rockburst Based on the Surface Fractal Feature[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Hong-wu , ZHANG Xin-wei (Department of Engineering Mechanics, State Key Laboratory of Structural Analysis and Industrial Equipment, Dalian University of Technology, Dalian 116024, P R China);ANALYSIS OF DYNAMIC ELASTOPLASTC PROBLEMS BASED ON PARAMETRIC QUADRATIC PROGRAMMING AND EXACT INTEGRATION[J];Engineering Mechanics;2001-05
2 LI Nanjing1,ZHU Xiaoqin1,SONG Pengyun1,HU Mingfu1,WANG Jian2,GUO Chunyi2(1Kunming University of Science and Technology,Kunming,650224,Yunnan,China;2Yunnan Dawei Chemical Equipment Fabrication Co Ltd,Qujing,655338,Yunnan,China);An Investigation on Multi-Layer Pressure Vessels and Their Progress[J];Chemical Engineering & Machinery;2008-06
3 ZHANG Da-peng,CHEN Guang-xiong,TIAN He-qiang (Tribology Research Institute,Southwest Jiaotong University,Chengdu 610031,China);Effects of fretting damage on fatigue life of axle[J];Machinery Design & Manufacture;2009-01
4 ZHANG HongWu LIAO AiHua ZHANG Zhao CHEN JinTao (State Key Laboratory for Structural Analysis of Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China);NUMERICAL SIMULATION FOR HEAT TRANSFER AND CONTACT PROBLEMS WITH A THERMAL-RESISTANT CONSTITUTIVE MODEL[J];Journal of Mechanical Strength;2004-04
5 WEI Yan-gang (Department of Mechanical Engineering, Dalian Railway Institute, Dalian 116028, China);Research on stress analysis and contacting edge effect for interference fit joint of hub[J];Journal of Machine Design;2004-01
6 CHENG Xuetao,XU Xianghua,REN Jianxun,LIANG Xin'gang(Heat Transfer and Energy Conversion—The Key Laboratory of Beijing Municipality,Department of Engineering Mechanics,Tsinghua University,Beijing 100084,China);Optimization of liquid cooling networks with couple parallel connections using Lagrange multipliers[J];Journal of Tsinghua University(Science and Technology);2008-08
7 YANG Guang-xue,XIE Ji-long,ZHOU Su-xia,XIAO Nan,XIE Yun-ye(Engineering Research Center of Structure Reliability and Operation Measurement Technology of Rail Guided Vehicles,Ministry of Education,Beijing Jiaotong University,Beijing 100044,China);Research on the Influence of Axle Design Parameters on Contact Pressure between Axle and Hub[J];Journal of the China Railway Society;2009-03
8 Zhao Hua (Res.Inst.of Rail Vehicles,Southwest Jiaotong University,Chengdu 610031,China) He Cuiwei (Designing Department,Ziyang Diesel Locomotive Works,Sichuan 641301,China) Liu Jianxin (Res.inst.of Rail Vehicles,Southwest Jiaotong University,Chengd;Numerical Analysis of the Assembly Stress within Locomotive Wheel Pair[J];JOURNAL OF THE CHINA RAILWAY SOCIETY;1998-01
9 Zhang Yuxian Guilin University of Electronic Technology, Guilin,Guangxi, 541004;Improved Design of Shrunk Super High Pressure Cylinder Based on Equal Strength Theory[J];China Mechanical Engineering;2006-S1
10 Wang Hong Guilin University of Electronic Technology ,Guilin,Guangxi, 541004;Research on the Design of High Pressure Cylinder Wall in Jet Cutting Technique[J];China Mechanical Engineering;2006-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved