Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Guangdong Trace Elements Science》 2007-01
Add to Favorite Get Latest Update

Application of Vacuum Impregnation Technology in Material Manufacture and Modification

WAN Ming1,WANG Ling(1,2),ZHANG Xianghui(1,2),YE Qiaoming1 (1.College of Materials and Chemistry & Chemical Engineering,Chengdu University of Technology,Chengdu 610059,China;2.Key Laboratory of Diamond Film,Chengdu University of Technology,Chengdu 610059,China)  
Vacuum impregnation is a technology to modify materials or reach some special demand as the effect of vacuum and impregnation.A review with 24 references is given on the application of vacuum impregnation in casting parts,modification of concrete and resin transfer molding including basic principle,advantages,kinds of impregnation agent,impregnation device and technological process.As the development of technology and increasing demand of the performance of new materials,vacuum impregnation will be more widely used in manufacture and modification of new materials,and becoming a important method to manufacture high-powered composite materials.
【Fund】: “十五”国家科技攻关计划重点项目课题(2004BA810B02);; 国家自然科学基金(4057203040472028)
【CateGory Index】: TB79
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 CHU Yi1,WANG Zhi-lin1,WANG Ben-sheng2(1.College of Science,Jiamusi University,Jiamusi 154007,China;2.College of Mechanical Engineering,Jiamusi University,Jiamusi 154007,China);Research on Vacuum Paraffin Experiment of the Woodwork[J];Journal of Jiamusi University(Natural Science Edition);2009-01
Chinese Journal Full-text Database 7 Hits
2 Zhang Dexing, Zhang Wengong, He Xinghong,Wang Huaqiao,Feng Jiajun,Zhong Chuangjian,Li Runquan. Department of Basic Sciences, Gungdong College of Pharmacy, Guangzhou 510224 China;Identification and plastication on the ancient corpses at Ming dynasty excavated in Donguang city[J];Anatomy Research;2004-01
3 Zheng Tianzhong, Liu Jianren, Zhu Keming (Department of Anatomy, Shanghai Medical University, Shanghai 200032);PRESERVATION OF ANCIENT CORPSE BY PLASTINATION[J];CHINESE JOURNAL OF ANATOMY;1999-03
4 Yan Zhanqiu et al;Infiltration Process for Automotive Pressure-Resistant Castings[J];Automobile Technology;1994-07
5 夏雷;Result Analysis of Swage-locking Pin Which Open-air Stored after 15 years[J];Light Industry Machinery;1996-03
6 Zhao Qushen, Zhao Panfeng (China Aviation Industrial Manufacturing Engineering Research Institute,100024);A Study of VARI[J];Fiber Composites;2002-01
7 Shen Yuanlin, Lin Gangzhi, Wu Ganghua(Zhejiang Vacuum Epuipment Group Corp);Vacuum Impregnation Technology and Vacuum Impregnation Process of Coil[J];VACUUM;1998-03
Chinese Journal Full-text Database 10 Hits
1 Zhang Xiaoyun (The Magazine House of EPA.Jinan 250031);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 1996[J];Engineering Plastics Application;1997-04
2 Zhang Xiaoyun, Tan Guichun, Li Yongxian (The Magazine House of EPA, Jinan 250031, China);ADVANCE IN THE PROCESSING TECHNOLOGY OF THE ENGINEERING PLASTICS OF CHINA IN 2002[J];Engineering Plastics Application;2003-06
3 Zhang Rui, Zheng Wei, Yuan Xiumei, Gao quanxi, Wang Zhaoliang(CNGC Institute 53, Jinan 250031, China);RESEARCH OF THE VACUUM ASSISTANT RESIN INFUSED[J];Engineering Plastics Application;2005-06
4 Li Wenxiao,Wu Wenping(School of Aerospace Engineering and Applied Mechanics,Tongji University,Shanghai 200092,China);BENDNG PROPERTY OF PM FOAM CORE FLLED GFRP HAT-STFFENED BEAM[J];Engineering Plastics Application;2009-01
5 Cheng Tianjian,Lu Xianxiao,Zhang Xinggang(Luoyang Ship Material Research Institute,CSIC,Luoyang 471039,China);RESEARCH ON COMPOSITE REINFORCED FIBER PERMEABILITY MEASURING AND VARI PROCESS SIMULATE[J];Engineering Plastics Application;2011-07
6 Wei Junwei,Cheng Tianjian,Guo Wantao(Luoyang Ship Material Research Institute,Luoyang 471023,China);Study of Foam Sandwich Structural Composites VARI Process Simulation[J];Engineering Plastics Application;2012-04
7 Liu Gang(Heilongjiang Province Environmental Protection High-tech Promotion Center,Harbin 150056,China);Study on Straw Polymer Compound Material Preparation[J];Environmental Science and Management;2012-02
8 LIU Li yan,WANG Rui, JIAO Xiao ning,GUO Xing feng(Tianjin Polytechnic University,Tianjing 300160,China);RESEARCH AND PREPARING OF FLAX-FELT/UNSATURATED RESIN COMPOSITES[J];Fiber Reinforced Plastics/Composite;2004-02
9 LIU Li-yan,WANG Rui (School of Textile and Clothing, Tianjin Polytechnic University, Tianjin 300160, China);RESEARCH ON FLAX FIBER REIFORCED THERMOSETTING COMPOSITE[J];Fiber Reinforced Plastics/Composite;2004-04
10 WEI Guang-heng,HUANG Gu(College of Textile,Tianjin polytechnic University,Tianjin 300160,China);ARCHITECTURE REHABILITATION USING VACUUM ASSISTED RESIN INFUSION[J];Fiber Reinforced Plastics/Composites;2006-04
China Proceedings of conference Full-text Database 5 Hits
1 Yang Shichao,Duan Yuexin,Zhao Yan,Sun Jing ( Beijing University of Aeronautics and Astronautics,Beijing 100191);Study on permeability of preform in different shaping methods[A];[C];2010
2 PAN Lijian,LIU Weiping,CHEN Ping,QI Fangfang (Shanghai Aircraft Manufacturing Co.,Ltd.,Shanghai,200436,China);Research on Compression Behavior of Multi-axial Warp-knitted Fabrics[A];[C];2012
3 ;Research on VARI Technology Applied in Composite Vertical Tail Covering Cap[A];[C];2012
4 WANG Ming-zhe~1,ZHANG Xiong-jun~1,HAO Chun-gong~1,YU Xin~2 (1.Bejing Composite Materials Co.,Ltd.,Bejing 102101,China; 2.Liaoning Province Electric Power Co.,Ltd.,Dandong Power Supply Company,Dandong 118000,China);THE LATEST STUDY ON NEW STRUCTURE AND THE IMPLEMENTING PROCESS OF THE FULL COMPOSITE MATERIAL NODE FITTINGS APPLIED TO THE TRANSMISSION TOWER[A];[C];2012
5 Mou Xiangdong;Mechanical and Electrical Automotive Engineering Institute,Shandong Yantai University;;In the Automobile Casting Vacuum Infiltration Craft Infiltration the Medicinal Preparation the Determination[A];[C];2007
Chinese Journal Full-text Database 10 Hits
1 Yin Jiangang (Insititute 53);STUDY ON THE HIGH STRENGTH AND LOW DENSITY EPOXY COMPOSITES[J];Engineering Plastics Application;1994-03
2 SUN Chunbao, XING Yi, WANG QifengCivil and Environmental Engineering School, University of Science and Technology Beijing, Beijing 100083, China;High-strength deep-sea buoyancy material made of polymer filled with hollow glass micro-beads[J];Journal of University of Science and Technology Beijing;2006-06
3 Yuan Xiangdong (Shandong Research & Design Institute for Industrial Ceramics);Development and Use of Ceramics-Silica Roller for Plorizontal Tempering Glass Furnace[J];Glass;1994-04
4 LIANG Fu-hao1,CHEN Jun-ying1,ZHANG Yin-tong1,QIAO Yin-jie2,Han Cunxiao1(1.COOEC Subsea technology Co.,Ltd.Shenzhen 518067,China;2.College of Materials Science & Engineering,Harbin Engineering University,Harbin 150001,China);Application of Buoyant Material to ROV[J];Ship Engineering;2011-S2
5 WEN Guang wu,LEI Ting quan,ZHOU Yu(School of Materials Science and Engineering, Harbin Institute of Technology,Harbin 150001,China);Progress in Research on Fused Silica Matrix Composites[J];Journal of Materials Engineering;2002-01
6 HUANG Dao-sheng (Henkel Huawei Electronics Co., Ltd., Lianyungang 222006, China);The Material, Technology and some Questions on the Encapsulation in Current Epoxy Resin[J];Electronics & Packaging;2007-03
7 MA Yuan(Institute of Engineering of China Academy of Engineering Physics,Mianyang 621900,China);Technology analysis and research of epoxy potting pulse transformer[J];Electronics Process Technology;2011-05
8 YANG Yu-xiang, SHAO Qian, GE Sheng-song(School of Chemical and Environmental Engineering, ShandongUniversity of Science and Technology, Qingdao, 266510, China);Advance in Application of Glass Bead[J];China Powder Science and Technology;2006-02
9 Wang Jian Guo Yongkui Gao Yukun Ge Rui ( The fourth oil recovery factory ; Daqing Oilfield Limited Company; Petro China; );The properties and applications of Bubbles/epoxy composites[J];Plastics Manufacture;2011-09
10 JIA Yu-xi,CHEN Xi-liang,DING Yan-yu,SUN Sheng (School of Materials Science and Engineering,Shandong University,Jinan 250061,China);Numerical Analysis of Calorific Effect of Curing Reaction in Resin Transfer Molding Processes[J];Polymer Materials Science & Engineering;2008-08
【Secondary Citations】
Chinese Journal Full-text Database 6 Hits
1 Deng Jinglan Zhu Yingdan Wang Jihui (Wuhan University of Technology);STUDY OF SCRIMP MOULDING TECHNOLOGY[J];Fiber Reinforced Plastics/composite;2001-05
2 Zhao Qusen, Aeronautical Manufacture Engineering Research Institute of China, P. O. Box 863, Beijing, China 100024;BMI Resin System and Affordable Composite[J];Materials Review;2001-10
3 Zhao Qusen (Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China)[;Engineering Approach for Reducing Cost of Polymer-base Advanced Composites[J];Engineering Science;2001-09
4 Zhang Dexing, Zhang Wenguang, He Xinghong, et al. Department of Basic Sciences, Guangdong College of Pharmacy, Guangzhou ,510224;A study of plastination for the bones and burial articles from the ancient tombs of ming dynasty[J];Anatomy Research;1999-02
5 ;Function of Material and Process on “Affordable Composite”[J];Aeronautical Manufacturing Technology;2000-06
6 Zheng Tianzhong, Zhu Keming Department of Anatomy, Shanghai Medical University, Shanghai 200032;PLASTINATION AT ROOM TEMPERATURE[J];Chinese Journal of Anatomy;1998-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved