Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2009-01
Add to Favorite Get Latest Update

Deformation and Damage of 6063 Aluminum Alloy under Different Stress States

XU Wen-fu,CHE Hong-yan,CHEN Jian-hong(Lanzhou University of Technology,Lanzhou 730050,China)  
Tensile tests with plat specimen,notched specimen and shear specimen were performed.The fracture appearance was observed by SEM. ABAQUS finite element calculation and simulation were done.The deformation and damage process of 6061 aluminum alloy under three different stress states were analyzed carefully.Studies indicated that there were evident differences in deformation and damage under different stress states.The fracture strain under sheaing state was higher than that of notched tension,while the yield strength and peak stress of the notched tension were higher than those of the plat tension.The plat tension fracture was a mixture model of tension and shearing,composed by a certain proportion of dimples and shear planes.The notched tension facture had evident neck,composed mainly of dimples.The shearing fracture mainly composed of shear planes.The process of deformation and damage of the material under different stress states had been calculated and simulated by finite element software of ABAQUS.The results were consistent with the test results well.
【Fund】: 国家重大基础研究前期研究专项基金资助项目(2004CCA04900)
【CateGory Index】: TG146.21
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 CHE Hong-yan~1, QIAO Ji-sen~(1,2), CHEN Jian-hong~(1,2) (1. College of Materials Science and Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China; 2. State Key Lab. of Advanced New Non-ferrous Materials, Gansu Province, Lanzhou Univ. of Tech., Lanzhou 730050, China);Study of mechanical behavior of aluminum alloy tube with square cross-section and thin wall under axial loading[J];;2005-04
2 CHE Hong-yan1,2,ZHU Liang1,2,CHEN Jian-hong1,2,REN Guo-song1,2(1.College of Materials Science and Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.State Key Lab.of Gansu Advanced Non-ferrous Metal Materials,Lanzhou Univ.of Tech.,Lanzhou 730050,China);Experiment of local damage behavior within materials by using double-hole micro-shearing[J];Journal of Lanzhou University of Technology;2007-04
3 Cao Yinfeng Li Guangyao Zhong Zhihua (Key Laboratory of Advanced Technology of Vehicle Body Desige and Manufactory M.O.E., Hunan University, Changsha 410082);PARALLEL EXPLICIT FINITE ELEMENT SIMULATION OF VEHICLE COLLISIONS[J];Chinese Journal of Mechanical Engineering;2005-02
4 TANG An-min , SHI Jun-ping (Department of Engineering Mechanics, Xi'an University of Technology, Xi'an 710048, China);Experiment Analysis for Shear Break of Aluminum Alloy Material[J];Chinese Quarterly of Mechanics;2002-01
5 TANG Anmin, LIU Zeming(Xi'an University of Technology, Xi'an 710048,China);The Experiment Analysis for Fracture Laws of Aluminum Alloy Materials[J];Journal of Xi'an University of Technology;2003-03
6 Zhu Hao~(1*),Zhu Liang~(1,2),Chen Jianhong~(1,2) (1.State Key Laboratory of Gansu Advanced Non-(Ferrous) Metal Materials, Lanzhou University of Technology,Lanzhou 730050,China;2.Key(Laboratory) of Non-Ferrous Metal Alloys,Ministry of Education,Lanzhou University of Technology,Lanzhou 730050,China);FEM Simulation of Aluminum Alloy Damage under Two Kinds of Stress State[J];Chinese Journal of Rare Metals;2006-06
Chinese Journal Full-text Database 10 Hits
1 ZHANG Jianjun,WANG Yuanzhong,LI Li(Jiangsu Huohua Jituan,Xuzhou 221151,China);Numerical simulations of structural steel fracture experiments[J];Sichuan Building Science;2009-02
2 SUN Yuping,AN Jianyong,WANG Wanzhen(School of Civil Engineering,Lanzhou University of Technology,Lanzhou 730050,China);Experimental study of structure steel in stress triaxiality on fracture properties[J];Sichuan Building Science;2009-05
3 HU Changming1,LI Yinglei1,HU Shisheng2,LIU Cangli1(1.National Key Laboratory of Shock Wave and Detonation Physics,Institute of Fluid Physics,CAEP,Mianyang 621900,China;2.Key Laboratory of Mechanical Behavior and Design of Materials,University of Science and Technology of China,Chinese Academy of Sciences,Hefei 230027,China);Dynamic mechanical properties and deformation mechanism of MB2 alloy under high temperature and high strain rates[J];Ordnance Material Science and Engineering;2009-05
4 Wang Xueyan Song Guanghui Shi Xiaojing (Nanjing University of Science & Technology);IMPACT FATIGUE STRENGTH DESIGN OF THE LOCKING LUG OF BOLTS AND AN APPROACH FOR THE ESTIMATION OF ITS LIFE[J];Acta Armamentarii;1993-02
5 YANG Bin, HUAN Zanjun, ZHANG Jishang, YUAN Shijian, ZHANG Yuebin, CAO Fuyang State Key Lab for Adv Met Mater, University of Science and Technology Beijing, Beijing 100083, China National Key Lab of Precision Hot Processing of Metals, Harbin Institute of Technology, Harbin 150001, China;Microstructure and Tensile Properties of TiC/Ti-5Mo-5V-2Cr-3Al Composites Prepared by Melt In-situ Reaction Spray Forming[J];Journal of University of Science and Technology Beijing;2003-04
6 XU Xiu-juan1GAO Ge2(1.Department of Mechanical Engineering,Shaanxi Institute of Technology,Xi'an,Shaanxi 710302,China;2.Department of Mechanical and Electronic Engineering,Shaanxi Institute of Technology,Xi'an,Shaanxi 710300,China);Choice of Dynamical Stress for Vibratory Stress Relief Based on Fatigue Limit[J];Transactions of Beijing Institute of Technology;2008-04
7 Ge Aiqing (Chemical Machinery Department);Analysis of Substitution of "Straightening Normalization" for the Technique of "Heat-Straightening--NormalizationTreatment--Heat-Straightening "on 16MnR Steel[J];Journal of Beijing Institufe of Petrochemical Technology;1993-02
8 CAI Lian-shu,YU Ye-qiu,LI Wo-guang,YIN Zhan-hua(Faculty ofMaterials and Energy,Guangdong University of Technology,Guangzhou 510643,China);Tensile Fatigue for in Memory State Columnar Grain CuAlNi SMA Wires Casted by Heated Mold Continuous Casting Process[J];Journal of Materials Engineering;2006-07
9 CHENG Ju-qiang,LIU Zhi-xue,WANG Yuan-hui(College of Materials Science and ChemicalEngineering,Xi′an Technological University,Xi′an 710032,China);Study on Microstructure and Impact Fatigue Properties of New Type Bainitic Steel[J];Journal of Materials Engineering;2006-12
10 Zhang Hanqian; Wang Bao; Wu Yu(Taiyuan University of Technology);Failure Analysis of the Drum of a φ4/3.5/4×150m Cement Rotary kiln[J];MATERIAL SCIENCE AND TECHNOLOGY;1995-03
China Proceedings of conference Full-text Database 10 Hits
1 Wang Wanzhen~(1,2),Ji Haitao~1,Wang Xintang~2 (1.School of Civil Engineering,Lanzhou University of Technology,Lanzhou,730050; 2.Faculty of Architectural,Civil Engineering and Environment,Ningbo University,Ningbo,Zhejiang 315211);Fracture Experiment of Aluminum Alloy Plate with Elliptical Hole[A];[C];2010
2 Cui Haoxuan ~(1,2,3) Wang Weiqiang~(1,2,3) Li Aiju ~(2,3,4) Liu Yan ~(1,2,3) Li Mengli~(1,2,3) Xu Shugen~(1,2,3) Liu Huadong ~(1,2,3) (1.School of Mechanical Engineering,Shandong University Jinan 250061 China 2.Engineering and Technology Research Center for Special Equipment Safety of Shandong Province Jinan 250061 China; 3.Research Center of Safety Guarantee and Assessment to Special Equipment,Shandong University Jinan 250061 China; 4.School of Materials Science and Engineering,Shandong University Jinan 250061 China);Theoretical and Experimental Researches on the Elimination of Q245 Steel Strain Aging Embrittlement[A];[C];2009
3 Ye Duyi Cha Haibo~1 Xu Yuandong ~1 Xu Haohao ~2 Xu Changwei~2 (1.Zhejiang University,Hangzhou 310027 2.Jiaxing Electric Power Plant,Jiaxing 314000);Change Characteristic of Residual Mechanical Properties of Nickel-Based Superalloy Gh4145/Sq During Fatigue Damage At Elevated Temperature[A];[C];2009
4 Zhang Guangli Zhao Xinwei Luo Jinheng Zhang Yi Zhang Hua Zhang Liang (Tubular Goods Research Center of China National Petroleum Corporation, CNPC's Key Laboratory for Mechanical and Environmental Behaviors of Oil Tubular Goods Xi'an 710065 China);The Research for the relationship between fracture toughness and Charpy impact energy of X80 high strength pipeline steel[A];[C];2009
5 Mingtu MA, Zhigang LI and Hongliang YI Department of Materials Science and Technology, China Chongqing Research Institute of Automobile;Fatigue Properties of Spherical Graphite Iron Crankshafts[A];[C];2006
6 Wang Wanzhen~(1,2),Liu Wufeng~2,Lin Yun~1,Wang Tianhong~1 (1.Faculty of Architectural,Civil Engineering and Environment,Ningbo University,Ningbo,Zhejiang 315211,China; 2.School of Civil Engineering,Lanzhou University of Technology,Lanzhou,730050);Fracture test of structural steel at high stress triaxiality[A];[C];2010
7 Wang Wanzhen~(1,2),Ji Haitao~2,Wang Xintang~1,Lin Yun~1,Wang Tianhong~1 (1.Faculty of Architectural,Civil Engineering and Environment,Ningbo University,Ningbo,Zhejiang 315211,China; 2.School of Civil Engineering,Lanzhou University of Technology,Lanzhou,730050);Fracture test of aluminum alloy notched plates at low temperature[A];[C];2010
8 ZHAO Xu-ping~(1,2) YINYong-jing~(1,2) ZHANG Yong~(2,3) (1.Faculty of Mechanical and Electronic Engineering,University of Petroleum,Beijing 102249 China;2.Nanyang RG Petro-Machinery(Group)Co.Ltd.,Nanyang 473006,China;3.Faculty of Mechanical and Electronic Engineering,Southwest Petroleum University,Chengdu 610500,China);Heat treatment test of a kind of high strength steel[A];[C];2007
9 Li Yunguo,Wang Huaxiang,Yang Yang,Liu Xiangfa (Key Laboratory for Liquid-Solid Structural Evolution and Processing of Materials,Ministry of Education,Shandong University,250061,Jinan Shandong Binzhou Bohai Piston Co.,Ltd.256602 Binzhou);The Optimization of Main Strengthening Intermetallics in a High-performance Piston Alloy[A];[C];2010
10 ;轻型卡车驾驶室正面撞击强度分析验证[A];[C];2012
Chinese Journal Full-text Database 10 Hits
1 Tong Wen,Li Wei,Xia Chen,and Chun-lei Pei College of Material Science and Engineering,Chongqing University,Chongqing 400044,China;Effects of ultrasonic vibration on plastic deformation of AZ31 during the tensile process[J];矿物冶金与材料学报(英文版);2011-01
2 HUANG Jian-ke1,2,DONG Xiang-huai1(1.National Engineering Research Center of Die & Mould CAD,Shanghai Jiaotong University,Shanghai 200030,China;2.Shanghai Aircraft Design and Research Institute,Shanghai 200232,China);Numerical simulation and experimental verification of ductile fracture criteria of metals[J];Materials Science and Technology;2010-04
3 Liu Chunlai; Wang Xiaolin; Cheng jin; Hou Songyu (Harbin Institute of Technology Liu Changfu(Qiqihar No.2 Machine Tool Works);The Research and Manufacture of Ultrasonic Vibration Installation for Tensile Test[J];MATERIAL SCIENCE AND TECHNOLOGY;1994-02
4 HUANG Ya-min~(1),PAN Chun-xu~(1,2*)(1.Department of Physics,Wuhan University,2.Center for Electron Microscopy,Wuhan University,Wuhan Hubei 430072,China);Micro-stress-strain analysis in materials based upon EBSD technique:a review[J];Journal of Chinese Electron Microscopy Society;2010-01
5 LI Lianshi; ZHANG Lixing;YANG XIAOPing ZHONG Shi(University of Science & Technology Beijing);TUBE AND WIRE DRAWING WITH ULTRASONIC VIBRATION[J];IRON AND STEEL;1995-03
6 XIE Yan-min,YU Hu-ping,CHEN Jun,RUAN Xue-yu(National Die & Mold CAD Engineering Research Center,Shanghai Jiaotong University,Shanghai 200030,China);Recent advances of research on application of ductile fracture criteria in sheet metal forming process[J];Journal of Engineering Design;2007-01
7 QI Hai-qun,XIE Tao,YUAN Jiang-bo(School of Mechatronics Engineering,Harbin Institute of Technology,Harbin 150001,China);Simulating wire drawing with ultrasonic vibration using the finite element method[J];Journal of Harbin Engineering University;2007-10
8 WANG Gang, CHEN Jun ying, CHENG Jin (Dept. of Astronautics and Mechanics, Harbin Institute of Technology, Harbin 150001, China);Design and manufacturing of ultrasonic installation for tensile test[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;2000-03
9 HU Xiao-ping, HUANG Shi-biao, ZHANG Yun-dian(Hangzhou Dianzi University, Hangzhou 310018, China);The Design and Finite Element Analyses of the Ultrasonic Amplitude Transformer of Conical Type[J];Mechanical & Electrical Engineering Magazine;2005-02
10 CHU Tao(Shandong Yantai Fushan Polytechnical School,Yantai 265500,China);Finite element analyses of the ultrasonic amplitude transformer[J];Mechanical & Electrical Engineering Magazine;2009-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yan Cheng, Chen Jianhong (Dept. of Welding Engineering, Gansu Univ. of Tech. . Lanzhou, 730050);An Investigation Into the Micro-criterion of Cleavage Fracture[J];;1993-03
2 CHEN Jina hong, WANG Guo zhen, DONG Zhi qiang (College of Materials Science and Engineering, Gansu Univ. of Tech., Lanzhou 730050, China);Effect of warm pre-straining on fracture behavior of intermetallic alloy TiAl[J];Journal of Gansu University of Technology;2000-04
3 ZHU Liang, CHEN Jianhong(College of Materials Science and Engineering, Gansu Univ. of Tech., Lanzhou730050, China);Limit load of welded joint with mismatched mechanical strength[J];Journal of Gansu University of Technology;2002-04
4 ZHU Liang~(1,2),HOU Yan-rong~1,MA Zhongxin~1,JIANG Li-hua~1 (1.College of Materials Science and Engineering,Lanzhou Univ.of Tech.,Lanzhou 730050,China;2.State Key Lab.of Gansu Advanced Non-ferrous Metal Materials,Lanzhou Univ.of Tech.,Lanzhou 730050,China);Test for local strength of materials with double-holes micro-shearing method[J];Journal of Lanzhou University of Technology;2006-03
5 Shi Yaowu; Zhou Ningning,Zhang Xinping;Tang Wei and Lei Yongping(Xi'an Jiaotong University);Microshear test and its evaluation to mechanical properties of welded joints[J];TRANSACTIONS OF THE CHINA WELDING INSTITUTION;1994-04
6 TANG Anmin 1\ SHI Junping 1\ LOU Zhixian 2 (1.Department of Engineering Mechanics, Xi′an University of Technology, Xi′an 710048, China) (2.Department of Engineering Mechanics, Northwesten Polytechnical University, Xi′an 710072, China);DISCUSSION FOR THE POINT OF INITIATION BREAK AND THE DIRECTION OF CRACK GROWTH IN MIXED MODE FRACTURE OF DUCTILE MATERIALS[J];Journal of Mechanical Strength;2002-02
7 TANG Anmin 1 ZHU Wenyi 1 LU Zhixian 2 (1. Department of Engineering Mechanics, Xi′an University of Technology, Xi′an 710048, China) (2. Department of Engineering Mechanics,Northwesten Polytechnical University,Xi′an 710072, China);VARIOUS FRACTURE STATUS OF DUCTILE MATERIALS AND THEIR CRITERIA DISCUSSION[J];Journal of Mechanical Strength;2002-04
8 Cao Yinfeng Zheng Jun Li Guangyao Zhong Zhihua (Hunan University);PARALLEL EXPLICIT FINITE ELEMENT SIMULATION OF SHEET METAL FORMING[J];Chinese Journal of Mechanical Engineering;2003-07
9 Li Zhenhuan(Department Mechanics, Huazhong University of Science and Technology, Wuhan 430074, China)Kuang Zhenbang(Department Applied. Mechanics of Shanghai JiaoTong University, Shanghai 200240, China);THE MECHANISM AND ITS EFFECTIVE ENERGY CRITERION OF VOID COALESCENCE UNDER DIFFERENT STRESS TRIAXIALITY[J];ACTA MECHANICA SINICA;2000-04
10 Yang Wei (Department of Engineering Mechanics, Tsinghua University Beijing 100084);OUTSTANDING PROBLEMS IN THE FAILURE THEORY OF SOLIDS[J];;1998-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved