Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2009-01
Add to Favorite Get Latest Update

Deformation Behavior of Al-Ti-B Master Alloy during ECAP Process

HU Zhi-liu1,CHEN Hai-hong2,LI Hong-da3,WEI Wei-jie4,ZHAO Xiao-lian1(1,2.Guangxi University,Nanning 530004,China;3.Changzhou College of Information Technology,Changzhou 213164,China;4.Guangxi Professional Technology School,Nanning 530031,China)  
Equal channel angular pressing(ECAP)was carried out on Al-Ti-B master alloy at room temperature.The effects of ECAP on distribution and grain size of the second-phase particles were analyzed with high temperature microscope and scanning electron microscope and the hardness of the material was measured by sclerometer after different ECAP passes.The results showed that the distribution of the second-phase particles was improved greatly and the grain size was remarkably refined by ECAP process.After 8 passes of ECAP in route Bc with the billet being rotated 90°clockwise,the second-phase particles were uniformly distributed in α-Al matrix and initial block-like particles with about 20 μm in length,10 μm in diameter turned to be granular with an average grain size of about 5 μm.After 1 pass,the hardness of the material increased significantly and the increasing trend became slower after 4 passes.
【Fund】: 广西大学科研基金资助项目(X071041)
【CateGory Index】: TG146.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 LI Yong xia, ZHANG Yong gang, CHEN Chang qi(Department of Materials Science and Engineering, Beijing University of Aeronautics & Astronautics, Beijing 100083,China);Effect of equal channel angular pressing on microstructure and mechanical proper ties of high pure aluminum[J];Journal of Aeronautical Materials;2001-03
2 LI Hongda1,NONG Deng1,HU Zhiliu2(1.College of Mechanical Engineering,Guangxi University,Guilin 530004,China;2.College of Resources and Environment,Guangxi University,Guilin 530004,China);Research on the New Technology of ECAP-Conform for Ultra-fine Grain Materials[J];New Technology & New Process;2006-08
3 LI Hongda1,LI Kaiyu2,HU Zhiliu3,HAO Jianxiu4 (1.College of Mechanical Engineering, Guangxi University, Nanning 530004,China;2.College of Electromechanical Engineering, College of Yantai Nanshan, Longkou 265706,China;3. College of Resources and Environment, Guangxi University, Nanning 530004,China;4.Daqing Oil Field Chemical Group, Daqing 163000,China);Research on the Refinement Mechanism and Effect Between Al-Ti-B-RE and Al-Ti-C-RE[J];New Technology & New Process;2006-12
4 ;Microstructure and Refinement Mechanism of Uultrafine-grained Al-Ti-B Alloy Pressed by Eequal-channel Angular Pressing[J];China Foundry Machinery & Technology;2006-05
5 ZHANGZuo gui1,LIUXiang fa1,BIANXiu fang1,GUJi cun2 ,XONGGuang cheng3 (1 MaterialsScience&EngineeringSchool,ShandongUniversityofTechnology ,Jinan 2 50 0 6 1,Shandong ,China ;2 ShandongPingyinAluminumFactory ,Pingyin 2 50 4 0 3,Shandong ,China ;3 NanhaiDa;Hereditary Study and Application of Al-Ti-B MasterAlloy[J];FOUNDRY;2000-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 SUO Tao, LI Yu-long (Aircaft Engineering Department, Northwestern Polytechnical University, Xi'an 710072,China);Progress in Influence Factor of Grain Refinement during Equal-channel Angular Pressing[J];Journal of Materials Science and Engineering;2004-01
2 LIU Xian-lan,ZHANG Wen-yu(Mechanical Engineering Department,Hengyang Branch of Hunan University,Hengyang Hunan 421101,China);Effect of die structure to microstructure of materials through equal channel angular pressing[J];Forging & Stamping Technology;2006-04
3 NONG Deng,HUANG Shao-jun,LI Lin,ZHENG Kai-hong,WANG Hai-yan(Research Department of Wear-Resistant materials & Machinery,Guangzhou Research Institute of Non-ferrous Metals,Guangzhou 510651,China);Research situation of the effect of different process routes on the microstructural evolution of materials in ECAP[J];Journal of Guangdong Non-Ferrous Metals;2006-03
4 WANG Su-mei~(1,2),SUN Kang-ning~1,BI Jian-qiang~1,LIU Rui~1(1.Shandong University,Jinan 250061,China;2.Shanghai Institute of Optics and Fine Mechanics,Chinese Academy of Sciences,Shanghai 201800,China);Fabrication of Bulk Sub-microstructure 2A12 Aluminum Alloy by Equal Channel Angular Pressing[J];Materials for Mechanical Engineering;2006-01
5 SU Li-feng~1 PENG Kai-ping~1 XIAO Lin-gang~2 (1.Fuzhou University,Fuzhou 350002,China;2.University of Connecticut,Storrs CT06269 3136,USA);Refinement of H62 Brass by Constrained Groove Pressing[J];Materials for Mechanical Engineering;2007-07
6 PENG Xiao-dong1,2,YANG Hong1,XIE Wei-dong1,2(1.Chongqing University,Chongqing 400044,China;2.Engineering Research Center for Mg Alloys,Chongqing 400044,China);Microstructural Heredity of Al Master Alloy[J];Materials for Mechanical Engineering;2008-09
7 LIU Li,XU Chun-jie,ZHANG Zhong-ming,GUO Xue-feng(School of Materials Science and Engineering,Xi'an University of Technology,Xi'an 710048,China);Microstructure and mechanical properties of reciprocating extruded pure Al L2[J];Transactions of Materials and Heat Treatment;2006-03
8 LU Hong,PENG Kai-ping(College of Materials Science and Engineering,Fuzhou University,Fuzhou Fujian 350108,China);The factors influencing grain refinement in constrained groove pressing of two-phase alloys[J];Heat Treatment of Metals;2008-09
9 ;The Effect to Microstructure of Ultra-Fine Grained Material Acted by Extruding Die with Equal Arc Radius[J];Die & Mould Manufacture;2006-01
10 LI Jian-ping~1,YU Yan-li~2,HU Jian~3,LUO Jun-min~1 (1.Nanchang Institute Of Aeronautical Technology,Nanchang,Jiangxi 330034;2.Jianxi Electromechanical Technology Occupation Institute,Nanchang Jiangxi 330013;3.Nanchang Boiler Pressure Container Inspection Institute,Nanchang,Jiangxi 330000);Study on ECAP for ultra-fine alloy[J];Journal of Nanchang Institute of Aeronautical Technology;2005-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang Baiqing,Ma Hongtao,Li Jianguo,Fang Hongsheng (Department of Materials,Tsinghua University,Beijing 100084);Influence of Extruding Deformation on Microstructure and RefiningPerformance of Master Alloy Grain Refiner[J];HEAT TREATMENT OF METALS;1999-06
2 LIU Xiangfa; BIAN Xiufang; LI Hui; MA Jiaji(Shandong University of Technology,Jinan 250014);STRUCTURAL HEREDITY EFFECT OF REFINEMENT EFFICIENCY FOR AlTiB MASTER ALLOYS[J];ACTA METALLRUGICA SINICA;1996-02
3 Liu Xiangfa Bian Xiufang Xue Peijun Li Jiuping Ma Jiaji (Shandong University of Technology);STRUCTURE HEREDITARY DYNAMICS OF TiAl 3 IN Al MELT[J];CHINESE JOURNAL OF MECHANICAL ENGINEERING;1999-03
4 LIN GUANG-Lei (Nan Ping Aluminium plant,FuJian Nanping 353000);The effect of rare-earth on Al-Ti-B-Re inter midiate alloy[J];Aluminium Fabrication;2002-02
5 Gao Zesheng (North China Aluminum Co.,Ltd.,Zhuozhou,072750,China);Recent Development of Al-Ti-C Grain Refining Master Alloys[J];LIGHT ALLOY FABRICATION TECHNOLOGY;1998-10
6 Feng Qingling(Department of Materials Science and Engineering, Tsinghua University)Wang Changming(Department of Mechanical Engineering, Beijing Light industry Institute);The "poisoning" effect of TiC particles in Al-Ti-C master alloy[J];;1994-05
7 Zhang Zuogui Liu Xiangfu Bian Xiufang (Shangdong University of Technology);Influence of the TiB 2 Distribution Morphologies on the Refining Characteristics of AlTi5B Master Alloys[J];SPECIAL CASTING & NONFERROUS ALLOYS;1999-05
8 BiJianqiang, Sun Kangning, Liu Rui, Fan Ruihua, Wang Sumei (Shandong University, Jinan, China);Microstructure of Ultrafine-grained 2A12 Aluminum Alloy Pressed by Equal-channel Angular Pressing[J];Special Casting & Nonferrous Alloys;2006-01
9 Liu Xiangfa Bian Xiufang Yang Yang\ Qi Xiaogang Song Laipeng\ Ma Jiaji (Shandong University of Technology);The Formation Law of TiAl 3 Morphologies in AlTi5B Master Alloy[J];SPECIAL CASTING & NONFERROUS ALLOYS;1997-05
10 ZHANG Sheng-hua1, ZHANG Han1, ZHU Yun2 (1.School of Materials Science and Engineering, Central South University, Changsha 410083, China; 2.Jiangxi Ganzhou Aluminum Plant, Ganzhou 341100, China);Effect of rare earth element on Al-Ti-B-RE master alloys[J];Journal of Central South University of Technology(Natural Science);2005-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved