Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2009-04
Add to Favorite Get Latest Update

Fatigue Fracture of Stainless Steel Wires in Metal Rubber Damper

DONG Xiu-ping1,2,LIU Guo-quan1,3,YANG Jian-chun1,4,BAI Hong-bai4(1,3.University of Science and Technology Beijing,Beijing 100083,China;2.Beijing Technology and Business University,Beijing 100048,China;4.Ordnance Engineering College,Shijiazhuang 050003,China)  
Using laser scanning confocal microscope(LSCM),the surface contour of  0.3 mm cold-drawn stainless steel wires with the composition close to 302 austenitic stainless steel was studied and the microstructure was observed by SEM.Fatigue test was performed on hollow cylinder-shaped metal rubber damper made of such wires,and the fatigue fracture reason of the wires was analyzed.The results show that there were a lot of concavo and convex micro bodies on the surface of the steel and the wire's surface roughness Ra was 3.447 μm.There were shuttle-shaped micro holes along the drawing axis with hard particles as core in the microstructure of the steel.The cracks originated from the surface of the wires and each fracture had more than one crack origins.Steady and fast spreading area both took up 50% of the toal fracture.Waviness fatigue striation was piled with tongue-shaped wrinkles which had important relationship with the shuttle-shaped micro holes.
【Fund】: 装备预先研究资助项目(51312040405)
【CateGory Index】: TG142.71
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 LI Yuming ZHENG Jian BAI Hongbai (The Ordnance Engineering University, Shijiazhuang 050003) Supported by National Natural Science Foundation of China No.50105021. Manuscript received December 16, 2002; in revised form July 24, 2003. To whom correspondence should be addressed, Tel:(0311)7992172,;Dynamic mechanics model of metal-rubber materials[J];Chinese Journal of Materials Research;2003-05
2 KOU Hong-ning~1,LIU Guo-quan~1,YANG Jian-chun~2,BAI Hong-bai~2(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Department of Guns Engineering,Ordnance Engineering College,Shijiazhuang 050003,China);Microstructure and Mechanical Properties of Stainless Steel Wires Used for Metal Rubber[J];Journal of Aeronautical Materials;2006-04
3 DONG Xiu-ping1,LIU Guo-quan1,YANG Jian-chun2,BAI Hong-bai2(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Department of Guns Engineering,Ordnance Engineering College,Shijiazhuang 050003,China);Microstructure of Cool-Drawing Austenitic Stainless Steel Wires Used for Metal Rubber[J];Journal of Aeronautical Materials;2007-06
4 CHEN Yan-qiu,GUO Bao-ting,ZHU Zi-gen (Beijing University of Aeronautics and Astronautics,Beijing100083,China);The Investigation of the Stiffness Characteristics and the Stress-Strain Relation of Metal Rubber[J];Journal of Aerospace Power;2002-04
5 PENG Wei,BAI Hong-bai,ZHENG Jian,TANG Xi-nan,LI Guo-zhang,HE Zhong-bo(Dept.of Artillery Engineering,Ordance Engineering College,Shijinzhuang,050003,China);A Micromechanics Constitutive Model of the Metal Rubber Materials Based on the Radial and Axial Combined Deformation of the Microsprings[J];Journal of Experimental Mechanics;2005-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Pang Zhaofu,Li Wenzhu,Huang Lei (Technology Center of Angang Steel Co.,Ltd.,Anshan 114009,Liaoning,China);Formation of Hydrogen Brittleness in Steel Wire Pickling and Its Preventive Measure[J];Angang Technology;2008-06
2 QIU Bo~1 QIAN Cai-fu~1 LI Hui-fang~1 GAO Ke-wei~2 (1.College of Mechanical and Electrical Engineering,Beijing University of Chemical Technology,Beijing 100029,China;2.Department of Materials Physics,University of Science and Technology,Beijing,Beijing 100083,China);TEM observation of dislocation emission and nano-crack nucleation[J];Journal of Beijing University of Chemical Technology(Natural Science Edition);2006-04
3 HUANG Jinfeng1),LI Yongbing1),LUO Hairong1),CUI Hua2),CAI Yuanhua1),DUAN Xianjin1),ZHANG Jishan1)1)State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China 2)School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Microstructure and mechanical properties of spray formed AZ31 magnesium alloy[J];Journal of University of Science and Technology Beijing;2008-04
4 by Zong Pei and Wang Zhiguo;Test Study of Fatigue Crack Propagation in 450MPa Grade Steel for Ship Body[J];Ship Engineering;2002-05
5 GUO Tong-sheng1,YANG Jun-jie1,2(1.Datong Electric Locomotive Co.LTd.,Datong 037038,China;2.School of Mechanical and Electric Engineering,Beijing Jiaotong University,Beijing100044 China);On Strength Analyzing of Strctures for SS7 Canon Box[J];Journal of Chongqing Institute of Technology(Natural Science);2009-02
6 PAN Zhijun LI Wenxian (The Department of Material Science and Technology,Central South University,Changsha 410083);Current Status and Future Trends of Research on Fracture Toughness of High Strength Aluminum Alloys[J];Materials Review;2002-07
7 XIAO Yang, ZHANG Xin-ming(School of Materials Science and Engineering,Central South University, Changsha 410083, China);Fracture Mechanism Analysis of Mg-9Gd-4Y-0.6Zr Alloy from -196℃ to 400℃[J];Journal of Materials Engineering;2007-01
8 LI Hong-ying,ZHANG Xi-wang,DING Chang-wei(School of Materials Science and Engineering,Central South University,Changsha 410083,China);Effect of thermal treatment on Fracture Toughness of 16MnR Steel[J];Journal of Materials Science and Engineering;2008-04
9 GAO Diankui, FU Yuming, BAI Xiangzhong, LI Wenqing (Yanshan University, Qinhuangdao 066004 ; Qinhuangdao Bearing Factory);LAPPING REPAIR FOR QUENCHING CRACK INSIDE CAVITY DIE OF 9Cr2 STEEL[J];Chinese Journal of Material Research;2001-05
10 QIAN Caifu~(**) LI Huifang CUI Wenyong (Beijing University of Chemical Technology,Beijing 100029);Mode Ⅰ crack tip plastic zone,dislocation-free zone and their effects on crack propagation[J];Chinese Journal of Materials Research;2007-06
China Proceedings of conference Full-text Database 1 Hits
1 X.M.He~(1,2) GL.Peng~2 Y.Liu~2 J.B.Zhang~2 L.Meng~1 1.College of Materials Science and Chemical Engineering;Zhejiang University;Hangzhou 310027,China; 2 Zhejiang Tianle Group Co.,LTD,Shengzhou 312400,China;Analysis of Crack during Cold Heading of T-yoke Used in Loudspeaker[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 XU Chun chun 1, ZHANG Xin sheng 1, HU Gang 1,2 , WANG Dong 1, LUO Ya nan 1 (1. College of Materials Science and Technology, Beijing University of Chemical Engineering, Beijing 100029; 2. Department of Chemistry, Huanggang Normal College, Huan;Deformation Induced Martensite of Cold Worked Stainless Steel and Its Corrosion Behaviors[J];Materiais Protection;2002-03
2 WANG Shu-hua~(1, 2),YANG De-zhuang~1, HE Shi-yu~1, LU Gang~1 (1. School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China,E-mail: wsh721006@ yahoo.com.cn;2. Dept. of Machine Engineering, Science and Technology University of Heilongjiang, Harbin 150027,China);Fatigue behavior of 1Cr18Ni9Ti steel at low temperatures and in vacuum[J];Material Science and Technology;2004-06
3 Li Gang Zhu Ruihua (Xian Jiaotong Univercity);Orientation Analysis of Martensite Transformation after Strain[J];Rare Metal Materials and Engineering;1991-05
4 LI Yuming ZHENG Jian BAI Hongbai (The Ordnance Engineering University, Shijiazhuang 050003) Supported by National Natural Science Foundation of China No.50105021. Manuscript received December 16, 2002; in revised form July 24, 2003. To whom correspondence should be addressed, Tel:(0311)7992172,;Dynamic mechanics model of metal-rubber materials[J];Chinese Journal of Materials Research;2003-05
5 XIA Yu-hong~1, JIANG Hong-yuan~1, LI Gui-xian~1, YAN Hui~1,А.И.Белоусов~2 (1.Department of Machine Design, Harbin Institute of Technology, Harbin 150001, China; 2.Samara State Aerospace University, 443086 Russia);Test of gas penetrability of porous metal rubber material made of 0Cr18Ni9Ti[J];Journal of Functional Materials;2004-02
6 Li Zhongying; Qi Naiming; Liu Tun (Dept. of Astronautics and Mechanics, HIT);Application of Elasticity Combined with Poriness of Metal-rubber[J];JOURNAL OF HARBIN INSTITUTE OF TECHNOLOGY;1999-03
7 WANG Shao-chun,DENG Zong-quan,GAO Hai-bo,HU Ming(School of Mechatronic Engineering, Harbin Institute of Technology, Harbin 150001, China);Experimental investigation on mechanical property of metal rubber used in Lunar Lander in high or low temperature[J];Journal of Aeronautical Materials;2004-02
8 KOU Hong-ning~1,LIU Guo-quan~1,YANG Jian-chun~2,BAI Hong-bai~2(1.School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;2.Department of Guns Engineering,Ordnance Engineering College,Shijiazhuang 050003,China);Microstructure and Mechanical Properties of Stainless Steel Wires Used for Metal Rubber[J];Journal of Aeronautical Materials;2006-04
9 CHEN Yan-qiu,GUO Bao-ting,ZHU Zi-gen (Beijing University of Aeronautics and Astronautics,Beijing100083,China);The Investigation of the Stiffness Characteristics and the Stress-Strain Relation of Metal Rubber[J];Journal of Aerospace Power;2002-04
10 Wang Xin and Zhu Zigen (4th Dept.Beijing University of Aeronautics and Astronautics,Beijing 100083);A RING-LIKE METAL RUBBER DAMPER[J];JOURNAL OF AEROSPACE POWER;1997-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved