Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2009-04
Add to Favorite Get Latest Update

Powder Injection Molding of TiC-10%Ni-10%Mo Cermet

WANG Xue-hong1,XIAO Ping-an2,LIU Ji-zi2,LEI Chang-ming3(1.Hunan Industry Polytechnic,Changsha 410208,China;2.Hunan University,Changsha 410082,China;3.Central South University,Changsha 410083,China)  
TiC-10%Ni-10%Mo cermet was fabricated by powder injection molding method with TiC,Ni and Mo powders as starting materials.The influence of debinding and sintering parameters on the debinding rate,binder loss ratio,quality of a brown compact and properties of an as-sintered cermet was evaluated systematically.The results reveal that the proposed debinding process consisted of initial solvent debinding in heptane and a subsequent thermal debinding as following: heating from room temperature to 60 ℃ at 3.5 ℃·min-1,then heating to 300 ℃ at 2.2 ℃·min-1 plus a 20 min holding and final heating to 600 ℃ at 3.3 ℃·min-1 plus another 30 min holding.The optimized sintering process was proposed as(1 500-1 530) ℃×2 h,by which the sintered cermet could get relative density over 99%,hardness over 95 HRA and average grain size less than 5 μm.
【Fund】: 国家自然科学基金资助项目(50674044);; 中国博士后科学基金资助项目;; 国家留学基金资助项目;; 湖南省自然科学基金资助项目(05JJ30199)
【CateGory Index】: TF124.39
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 ;Debinding Step in Metal Injection Molding[J];Materials Review;1999-01
2 TANG Bo (Institute of Powder Metallurgy, Central South University,Changsha 410083, China) . .;PROPERTIES AND DEVELOPMENT OF TiC BASED CERMETS .[J];Hunan Metallurgy;2004-05
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Cheng Jigui, Xia Yonghong ( Department of Material Science and Engineering, Hefei University of Technology 230009) Wang Hualin, Xu Weibing (Department of Chemical Engineering, Hefei University of Technology 230009);STUDY ON THE WARM COMPACTION BEHAVIORS OF PS/Cu POWDER[J];Engineering Plastics Application;2000-06
2 LIN Yun1,2,ZHANG Wen-xing1,CHAI Dong-lang1,QI Zhi-wang3,SHI Hong-gang3(1.School of Material Science and Technology,Xi'an Jiaotong University,Xi'an 710049,China;2.Guiyang University,GuiYang 550005,China;3.Ningbo Branch of China Academy of Ordance Science,Ningbo 315103,China);Effect of stored energy on sintering process of pure metal powders[J];Ordnance Material Science and Engineering;2006-04
3 LI Yu-yu,ZHANG Ren-yuan (Faculty of Materials and Energy,Guangdong University of Technology,Guangzhou 510090,China);Research on hot-press sintering process of N type thermoelectric materials ZnO[J];Ordnance Material Science and Engineering;2008-05
4 LI Yanping, HU Xuesheng,GUO Shiju Advanced Technology and Material Co. Ltd., Beijing 100081, China Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China;Warm compacting and sinter hardening behavior of an iron-based alloy consisting Fe-Mo-B pre-alloyed powder[J];Journal of University of Science and Technology Beijing;2006-05
5 CUI Dawei1,2),QU Xuanhui1),GUO Ping2),LI Ke1)1) School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China 2) Department of Mechanical and Electronic Engineering,Weifang University,Weifang 261061,China;Sintering of nickel-free high nitrogen 0Cr17Mn11Mo3N stainless steel prepared by powder injection molding[J];Journal of University of Science and Technology Beijing;2008-10
6 Yang Bin(Bao Tou Vocational Technical College,Baotou Inner Mongolia 014030,China);Research on the theoretical basis of preparation of fragile tungalloy[J];Journal of Baotou Vocational Technical College;2002-01
7 FU Dai-xuan,LI Yun,XIE Zhan(Sichuan Petroleum Perforating Materials CO.LTD.,Neijiang,Sichuan 642177,China);On Felt-produced Grain Composite Powder for Pressing Perforation Charge Liner[J];Well Logging Technology;2008-05
8 DU Ming-zhang,XIE Zhan,FU Dai-xuan,ZHANG Qian(Sichuan Petroleum Perforating Materials CO.LTD.,Neijiang,Sichuan 642177,China);Influence of Tungsten Powder Shape on Penetration Depth of Perforator[J];Well Logging Technology;2008-05
9 ZHOU Yunlong1,2,HU Zhibiao1,DING Yinxiang1,QIU Zehai1,ZHANG Cheng1,2(1 College of Chemistry and Material Science,Longyan University,Longyan 364000;2 College of Chemistry and Chemical Engineering,Fuzhou University,Fuzhou 350108);Study on Adsorption Behavior of Bamboo Charcoal to Methyl Orange[J];Materials Review;2009-02
10 GAN Weiping,ZHANG Haiwang,LIU Yan(School of Materials Science and Engineering,Central South University,Changsha 410083);Effect of Milling Glass Frits on Void of Sintered Film of Low Temperature Sintered Paste[J];Materials Review;2009-02
China Proceedings of conference Full-text Database 10 Hits
1 Huang Chuanbing~(1,2) Du Lingzhong~1 Zhang Weigang~1 (1.State Key Laboratory of Multi-Phase Reaction Engineering,Institute of Process Engineering,Chinese Academy of Sciences.Beijing 10080,China;2.Graduate University of Chinese Academy of Sciences,Beijing 100049,China);Microstructure and tribological properties of plasma spray NiCr-Cr_3C_2-BaF_2/CaF_2 coating[A];[C];2008
2 HE Zhao-jun WANG Wei-jin LIU Xiao-ming YANG Ning ZHU Yu-bin (School of Material Science and Engineering,Shanghai University,Shanghai 200072,China);Sintering behavior of thin W-Cu sheet compact[A];[C];2007
3 XIAO Chang-jiang~(1,2) JIN Chang-qing~2 WANG Xiao-hui~3 (1.Department of Material Science and Engineering,Henan University of Technology,Zhengzhou,450007,China;2.Institute of Physics,Chinese Academy of Science,Beijing 100080,China;3.State Key Laboratory of New Ceramics and Fine Processing,Department of Material Science and Engineering,Tsinghua University,Beijing 100084,China);Sintering nanocrystalline ceramics using ultra-high pressure assisted approach[A];[C];2007
4 Bai Liuyang~(1,2) Li Shaohua~1 Yuan Fangli~(1,*) Ke Jiajun~1 (1.State Key Laboratory of Multi-Phase Complex System,Institute of Process Engineering,Chinese Academy of Sciences,Beijing 100080,China;2.Graduate University of Chinese Academy of Sciences,Beijing 100049,China);Preparation of Metallic Nickel and Ni-Coated Composite Powders via Ethanol Reduction Route[A];[C];2008
5 Jiang Yan, Xie Gang, Li Rongxing (The Faculty of Materials and Metallurgical Engineering, Kunming University of Science and Technology, Kunming 650093, China);Effect of Electrolytic Parameters on Catholic Current Efficiency from Nickel Powders[A];[C];2006
6 LUAN Da-kai, HAN Jian-min, LI Rong-hua, YANG Xi-fu, CHI Hong-bin, JIA Xiao-lei, WANG Jin-hua (School of Mechanical, Electronic and Control Engineering, Beijing Jiaotong University, Beijing, 100044, China; Working Service Corporation of CSR Shijiazhuang Rolling Stock Works, Shijiazhuang 050000, China);Mechanical properties of Cu-based powder metallurgy braking material for express train[A];[C];2005
7 LI Zhou, ZHANG Guo-qing, ZHANG Yi-fei, YUAN Hua, YAO Rui-ping, XU Shi-bin, TIAN Shi-fan (National Key Laboratory of High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing 100095, China);Structures and properties of argon-gas atomized superalloy powders[A];[C];2005
8 ;粉碎与时空[A];[C];2000
9 Liu Xuemei,Song Xiaoyan,Zhang Jiuxing College of Materials Science and Engineering,Key Laboratory of Advanced Functional Materials,China Ministry of Education,Beijing University of Technology,Beijing 100124,P.R.China;Study on mechanism of homogeneous neck growth of conductive pure materials during SPS[A];[C];2009
10 YAN Jin-zhong (Changsha Jiageer Machinery Manufacturing Co.,LTD,Changsha 401208, China);Four great states of substance and production of grains[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhou Zehua Ding PeidaoCollege of Material Science and Engineering,Chongqing University,Chongqing 400044;Current Status of Research on Additives in Ti(C,N) based Cermet[J];Materials Review;2000-04
2 Li Yimin;Huang Boyun; Qn Xuanhui; Liang Shuquan and Qiu Guanghan(Powder Metallurgy Institute Central South University of Technology, Changsha, 410083);The Technological Progress of Metal Injection Modelling[J];RARE METAL MATERIALS AND ENGINEERING;1996-01
3 LI Kui, PAN Fu sheng, TANG Ai tao (College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China);Present Status and Development of Synthesis Technologies for TiC,TiN,Ti(C, N) Powders[J];Journal of Chongqing University(Natural Science Edition);2002-06
4 XU Yudong, LIU Ning, ZENG Qingmei, LI Hua, SHI Min(School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China);MICROSTRUCTURE AND MECHANICAL PROPERTIES OF NANO MODIFIED CERMETS[J];Acta Materiae Compositae Sinica;2003-01
5 Fu Zhengyi Wang Hao Wang Weimin Yuan Runzhang (Sino Russia Joint Research Center on SHS, Wuhan University of Technology, Wuhan 430070);TiC x Ni CERMETS MADE BY SHS/QP METHOD—? . STUDY ON THE COMBUSTION PROCESS[J];ACTA MATERIAE COMPOSITAE SINICA;1997-02
6 Min Xinmin\ Deng Zhiping\ Li Jiayu\ Yuan Runzhang (Advanced Materials Research Institute,Wuhan University of Technology,Wuhan\ 430070);STRUCTURE,PROPERTY AND QUANTUM CHEMISTRYCALCULATIONS OF CERAMICS OF TIC AND TIN[J];CHINESE JOURNAL OF COMPUTATION PHYSICS;1997-01
7 Liu Ning Zhao Xinzhong Liu Canlou Hu Zhenhua Cui Ku(Huazhong University of Science and Technology) Cheng Benpei Cheng Li(Institute of Solid State Physics, Academia Sinica);EFFECTS OF ADDITION OF CARBON ELEMENTS ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti(C,N) BASED CERMETS[J];Physical Testing and Chemical Analysis Parta Physical Testing;1995-02
8 Wang Xiabing (Department of Mechanical and Electronic Engineering, Shaoxing University, Shaoxing, Zhejiang, 312000);The Characteristics of Steel-bonded Hard Alloy and Its Application in Dies[J];;2002-10
9 LU Qin-zhong1,ZHANG Fu-run1,YU Li-xin2 (1 College of machinery, HUST, Wuhan Hubei 430074,China; 2 Joint-stock company of new material product,Qianjiang Hubei 433124, China);The Condition and Trend of Ti(C,N) Cermet[J];Journal of Wuhan Textile S.h.t. Institute;2002-05
10 ZHANG Xing-Hong;HAN Jie-Cai;HE Xiao-Dong;DU Shan-Yi (Center for Composite Materials, Harbin Institute of Technology Harbin 150001 China);TiC-Ni Functionally Gradient Material Produced by SHS[J];JOURNAL OF INORGANIC MATERIALS;1999-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved