Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-03
Add to Favorite Get Latest Update

Effects of Different Ageing Processes on Microstructure and Mechanical Properties of 6063Aluminum Alloy

NING Ai-lin1,2,SUN Yu2,HUANG Ji-wu2(1.Department of Mechanical and Energy Engineering,Shaoyang University,Shaoyang 422004,China;2.School of Materials Science and Engineering,Central South University,Changsha 410083,China)  
Single step ageing(180℃×6h)and double step ageing(170℃×2h+200℃×1.5h)for 6063 aluminum alloy were carried out,and effects of different ageing processes on microstructure and mechanical properties were studied.The results show that hardness,tensile strength,yield strength and elongation of double step aged alloy were better than that of single step aged alloy.There were metastableβ″phases in transgranular and spheroidized precipitated phases at crystal boundaries,what′s more,an obvious precipitate-free-zone(PFZ)existed around grains boundary.After double step ageing,theβ″phase in transgranular was smaller,and precipitated phases at grain boundaries distributed discontinuouslies and PFZ was narrow.
【Fund】: 湖南省自然科学基金资助项目(08JJ3101);; 湖南省教育厅项目(09K103)
【CateGory Index】: TG156.92
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 Li Hai, Zheng Ziqiao, Wang Zhixiu (Central South University, Changsha 410083, China);Influence of Heat Treatment Regime on Microstructures and Fracture Characteristics of 7055 Al Alloy Containing Ag[J];Rare Metal Materials and Engineering;2005-04
Chinese Journal Full-text Database 10 Hits
1 LIU Jing an (Southwest Aluminium Processing Factory,Chongqing 401326,China);Evaluation of Large-type Aluminium Alloy Bar Stock for Vehicle-trolley and its Extruding Technological Characteristics[J];Sichuan Nonferrous Metals;2001-01
2 Xu Xiangming(Manufacturing Management Department,Special Steel Branch,Shanghai 200940,China);Technical Improvement and Practice in Grinding off Hot Rolled Bar's Rolling Edges[J];Baosteel Technology;2006-04
3 XU Shilong1),LI Longfei1),YANG Wangyue2),SUN Zuqing1)1)State Key Laboratory for Advanced Metals and Materials,University of Science and Technology Beijing,Beijing 100083,China2)Materials Science and Engineering School,University of Science and Technology Beijing,Beijing 100083,China;Effect of deformation on the temper process of lath martensite[J];Journal of University of Science and Technology Beijing;2007-09
4 WANG Sheng-qiang,WANG Shao-hua,MA Zhi-feng, WANG Qiang,WANG Jian-guo,LU Zheng(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Investigation on Deformation Behavior of a New Type Al-Zn-Mg-Cu-Zr Alloy[J];Journal of Materials Engineering;2012-06
5 LI Yuan-shan1,CHEN Zhen-hua2,LEI Xiao-juan2 (1.School of Computer,National University of Defense Technology,Changsha 410073,China; 2.School of Material Science and Engineering,Hunan University,Changsha 410082,China);Effect of aging on Sn-Bi lead-free solder[J];Materials Science and Technology;2009-03
6 Dai Xiaoyuan1,2, Xia Changqing1, Liu Changbin1 (1. Central South University, Changsha 410083, China) (2. Changsha University of Science and Technology, Changsha 410076, China);Effect of Sc Addition on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloys[J];Rare Metal Materials and Engineering;2006-06
7 Li Hai1,2, Wang Zhixiu1, Zheng Ziqiao2 (1. Jiangsu Polytechnic University, Changzhou 213016, China ) (2. Central South University, Changsha 410083, China );Effects of Aging Treatment on the Microstructures and Slow Strain Tensile Properties of 7000 Series Ultra-High Strength Aluminum Alloy[J];Rare Metal Materials and Engineering;2007-09
8 Dai Xiaoyuan~(1,2) Xia Changqing~2 Sun Zhenqi~2 Hua Manyu~1 Long Chunguang~1 (1.Changsha University of Science and Technology,Changsha 410076,China)(2.Central South University,Changsha 410083,China);Effect of Strengthening Solution Treatment on Microstructure and Mechanical Properties of Al-7.6Zn-2.1Mg-1.30Cu-0.15Zr-0.30Sc Alloys[J];Rare Metal Materials and Engineering;2007-S3
9 Dai Xiaoyuan1,2,Xia Changqing2,Long Chunguang1,Kou Lili1(1.Changsha University of Science and Technology,Changsha 410004,China)(2.Central South University,Changsha 410083,China);Morphology of Primary Al_3(Sc,Zr) of As-Cast Al-Zn-Mg-Cu-Zr-Sc Alloys[J];Rare Metal Materials and Engineering;2011-02
10 Wang Shaohua1,Zhang Xingguo1,Yang Shoujie2,Fang Canfeng1,Hao Hai1,Dai Shenglong2(1.Dalian University of Technology,Dalian 116024,China)(2.Beijing Institute of Aeronautical Materials,Beijing 100095,China);Influence of Aging Treatment Regime on Fracture Behavior of Al-7.1Zn-1.1Mg-1.6Cu-0.14Zr Alloy[J];Rare Metal Materials and Engineering;2011-03
China Proceedings of conference Full-text Database 5 Hits
1 ZHOU Hai WAN Hancheng CHEN Fei YAO Bin College of mechanical and engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China;The analysis of process and properties of gas multi-elemnet penetrating[A];[C];2006
2 Li shengli~1,Sun weilian~(12),Ge sujing~2,Wang huiqiang~(12),Li duan~2,Peng jing~3, (1.College Of Mechanical And Electronic Engineering,Agricultural Univeisity Of Hebei,BaoDing071000,China;2.He Bei Li Zhong Group,BaoDing071000,China;3.College Of Mechanical Electronic And Engineering,Xi'An University Of Architecture And Technology,Xi'An,710055,China);Influence of Homogenization Annealing Time on Microstructure of 6061 Aluminum Alloy[A];[C];2010
3 Liying~1,Sun weilian~1,Ge sujing~2,Wang huiqiang~1,Yang guochao~2,Sunbo~1 (College of mechanical and Electrical Engineering,Agricultural University of Hebei,Baoding 071001,China;Hebei LiZhong Group,Baoding 071001);The exploration about sub-functions apply to optimizationing the homogenizing treatment of 6061 aluminum alloy[A];[C];2010
4 YAO Bin, WAN Han-cheng, ZHOU Hai, CHEN Fei (Department of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China);Properties of 38CrMoAlA steel processed by gas multi-elements penetrating[A];[C];2005
5 LUO Bin-li,MAO Jiang-hong,LIN Hai-feng,CAO Ji-min (Xi'an SMA Materials Co.,Ltd.,Xi'an 710021,China);Heat processing and treatment technology of TB2 titanium alloy[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Yan Dajing;Zhang Yudong;Wang Hongshun;Wang Shaoman Shenyang Institute of Aeronautical Engineering;Effect of Ageing Condition on SCC Resistance and Exfoliation Corrosion Behavior of 7475 and 7050 Al Alloys[J];Journal of Materials Engineering;1993-02
2 Yan Dajing (Shenyaug Aeronautic Iudustry Institute);Formation Characteristics of PFZ in Aluminium Alloy of 7475 and 7050 and It's Affection to Properties[J];Materials Science and Technology;1993-01
3 Song Renguo; Zhang Baojin; Zeng Meiguang( Northeastern University)Jiao Huisheng(Beijing Aeronautical Material institute);Investigation of Stress Corrosion Susceptibility for 7175 Aluminiun Alloy Double Peak Aged[J];TRANSACTIONS OF METAL HEAT TREATMENT;1996-02
4 HUA Mingjian Institute of Aeronoutical Materials,Beijing,Post Box NO.81;LI Chunzhi;WANG Hongjian Institute of Aeronautical Materials, Beijing;EFFECT OF MICROSTRUCTURES ON THE YIELD STRENGTH AND SCR OF 7075 ALUMINIUM ALLOY[J];Acta Metallrugica Sinica;1988-01
5 Li Xindan(Shanghai Aeroplan Factory);High Strength Aluminum Alloy Imitating U. S. 7075[J];;1992-04
6 SHAO Hua 1, LIU Zhao jing 1, LIU Jun 1, LI Feng zhen 1, WU Gao hui 2, YANG Feng 2 (1. School of Materials Science and Engineering,Harbin University of Science and Technology, Harbin 150080, P.R.China; 2. Harbin Institute of Technology,;Influence of ageing and thermal cooling cycling treatments on microplastic deformation resistance of 2024 Al alloy[J];THE CHINESE JOURNAL OF NONFERROUS METALS;2000-03
7 ZHENG Zi qiao, LI Hong ying, MO Zhi ming(The Key Laboratory of Nonferrous Metal Materials Science and Engineering of Ministry of Education, Central South University, Changsha 410083, P.R.China);Retrogression and reaging treatment of a 7055 type aluminum alloy[J];The Chinese Journal of Nonferrous Metals;2001-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved