Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-03
Add to Favorite Get Latest Update

Feasibility Using A_(gt) as Evaluation Index of Cold-rolled Steels Sheets for Autos

LUO Wu-si(Dongfeng Commercial Vehicle Technical Center of DFL,Shiyan 442001,China)  
Tensile tests of specimens with different gauge lengths of multiple sorts of cold-rolled steel sheets were performed to solve the problem that the rules of specimen gauge lengths are not all the same and percentage elongations after fracture(A) are not comparable,resulting in the inconvenience of selecting materials for autos.Results show that,compared with the percentage elongation after fracture,percentage total extension at maximum force(Agt) is not related to the gauge length of tensile specimen,it is a inherent characteristic parameter corresponding to the point of tensile strength(Rm) on the tensile curve of material.With the development of computer-aided test technology,nowadays,the Agt parameter could be conveniently measured by cold-rolled steel sheet factories and auto factories.It is suggested that Agt,which is not regulated by specimen gauge length and reflectes the essential characteristics of plastic material,is the ideal index for evaluating the elongation rate of cold-rolled steel sheet materials.
【CateGory Index】: TG115.52
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 3 Hits
1 Ding Fulian Wang Chengpu Chen Zhuoren (Baosteel Research Institute);Analysis of the Factors Influencing the Basic Formability Indexes of Thin Cold-rolled Steel Sheet[J];BAO STEEL TECHNOLOGY;2000-05
2 LI He-ping,ZHOU Xing(Testing & Analysis Center,Baoshan Iron & Steel Co.Ltd.,Shanghai 200941,China);BARRIER AND RESOLVENT OF AUTOMATIC MEASUREMENT FOR PERCENTAGE ELONGATION AFTER FRACTURE BY TENSILE MACHINES[J];Physical Testing and Chemical Analysis(Part A:Physical Testing);2008-01
3 LUO Wusi①,LI Feipeng①,HUANG liming①,ZHANG Gengxu②,LIN Jianhua①,ZHOU Cunfeng③(①Dongfeng Motor Co.,Ltd.,Shiyan 442001,CHN; ②Faculty of Electromechanical Engineering,Guangdong University of Technology,Guangzhou 510006,CHN; ③Zhengzhou Yutong Bus Co.,Ltd.,Zhengzhou 450000,CHN);Design & accomplishment of measurement and control system of tensile testing machine for steel sheets of auto[J];Manufacturing Technology & Machine Tool;2011-06
Chinese Journal Full-text Database 10 Hits
1 Ren Yi Cui Zhixin (AISC Technology Center);Investigation in H_2S Stress Corrosion Resistance of Screw Welded Tube[J];;2001-04
2 LIU Rui - tang, QU Zhan - yuan, SUN Bing - bing (Harbin Engineering University, Heilongjiang, Harbin 150001);Deformation and fracture of low alloy steel target under the impact of conical projectile[J];Ordnance Material Science and Engineering;2004-04
3 JIANG Hao min CHEN Xin ping YU Ning feng (Baosteel Technical Center,Shanghai China,201900) WAN Min (Beijing University of Aeronautic & Astronautics,Beijing China,100080);Forming Limit Analysis of St14-T Cold-rolled Metal Sheet under Double-linear Strain Path[J];Bao Steel Technology;2001-06
4 Wang Jingru Zhu Liqun Zhang Zheng Zhong Qunpeng(School of Materials Science and Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Influence of applied stress on cracking and apalling of oxide film in room temperature[J];Journal of Beijing University of Aeronautics and Astronautics;2005-10
5 REN Jilin~(1)),LI Xiaogang~(2)),SONG Kai~(1)), TANG Jihong~(1)), MA Hongwei~(3)) 1) Nanchang Institute of Aeronautical Technology, Nanchang 330034, China 2) Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China 3) Technology Centre, Research Institute of Equipment Corrosion Prevention, Lanzhou Oil-Refining Co., Lanzhou 730060, China;Numerical simulation and magnetic characteristic of typical ferromagnetic components in loading state[J];Journal of University of Science and Technology Beijing;2005-06
6 LI Jucang 1,2),CHEN Yinli 1),WANG Shuying 1),ZHAO Aimin 1),WANG Lina 1)1)Research Institute of Metallurgical Engineering,University of Science and Technology Beijing,Beijing 100083,China 2)Jiuquan Iron and Steel(Group)Corporation Ltd.,Jiayuguan 735100,China;A new type of corrosion resistance high silicon iron-base alloy with Ni[J];Journal of University of Science and Technology Beijing;2007-02
7 LI Jie1),CHEN Weiqing1),HE Beixing2),LIU Qing1)1)Metallurgical and Ecological Engineering School,University of Science and Technology Beijing,Beijing 100083,China2)Institute of Acoustics,Chinese Academy of Sciences,Beijing 100080,China;Study of probe material for ultrasonic treatment of molten steel[J];Journal of University of Science and Technology Beijing;2007-12
8 WANG Bing1,2),WANG Jianzhong2),CAO Liyun2),QI Jingang2),CANG Daqiang1)1)School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China 2)Department of Material and Chemical Engineering,Liaoning University of Technology,Jinzhou 121001,China;Effect of electric pulse modification on the structure and mechanical properties of Al-5%Cu-0.8%Mn alloy[J];Journal of University of Science and Technology Beijing;2008-04
9 Deng Zhi;Wang Xianjin(Department of Metals Forming,USTB,Beijing l00083,PRC);The Investigations of the Methods and Standards Assessing the Stamping Class of Deep-Drawing Sheet Metals[J];JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING;1994-01
China Proceedings of conference Full-text Database 5 Hits
1 ZHANG Wen-quan,ZHANG Xue-kun (College of Materials Science and Engineering,Beijing University of Technology, Beijing 100022,the People's Republic of China);Notch deformation behaviors of metallic material during tensile testing[A];[C];2007
2 LEI Min LIANG Yi-long WAN Ming-pan YANG Wei TIAN Qin LING Min (Key Laboratory for Structure and Strength of Materials,GuiZhou;School of Materials Science and Metallurgy Engineering,Guizhou University,Guiyang 550003,China);Failure Analysis on the High-speed Gear Shaft of a Reducer[A];[C];2007
3 ZHANG Xiao-yan~2,HUANG Li~3 (1.Baotou Iron and Steel(Group) Co.,Ltd.,Compact Stripe Production.Plant,Baotou 014010;China 2.Baotou Iron and Steel(Group) Co.,Ltd.,Technical Center,Baotou 014010;China);The Practice for Production of Sheet Steel of Automobile with Compact Strip Production Hot Strips[A];[C];2009
4 Zhang Weihan~1 Ma Ming~2 Cong Jinsong~1 (1.Cold Roll Workshop of Ansteel Co.,Ltd.,Anshan,114021; 2.Product Making Department of Ansteel Ltd.,Anshan,114021);Analysis the Deflaction of the Ansteel Cold Roll Workshop Annealing Line[A];[C];2009
5 SHEN Lie GUAN De-lin (Marine Engineering College,Dalian Maritime University,Dalian 116026,China);Study on Residual Stress and Fatigue Crack Propagationof Welded Joints of Submarine Pipeline[A];[C];2005
【Secondary Citations】
Chinese Journal Full-text Database 1 Hits
1 LI He-ping,ZHOU Xing(Testing & Analysis Center,Baoshan Iron & Steel Co.Ltd.,Shanghai 200941,China);BARRIER AND RESOLVENT OF AUTOMATIC MEASUREMENT FOR PERCENTAGE ELONGATION AFTER FRACTURE BY TENSILE MACHINES[J];Physical Testing and Chemical Analysis(Part A:Physical Testing);2008-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved