Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-03
Add to Favorite Get Latest Update

Effects of Process Parameters on Deep Drawing Performance of AZ31 Magnesium Alloy Sheet

GAO Rui,WEN Tong,JI Xiao-wei,ZHANG Jie(College of Material Science and Engineering,Chongqing University,Chongqing 400044,China)  
Effects of process parameters on deep drawing performance of AZ31 magnesium alloy sheet were studied by combining orthogonal experiment and finite element simulation,and the process parameters were optimized.The results show that blank-holder force had the greatest influence on maximum thinning ratio of magnesium alloy cup-shaped pieces,and the following was punch rate,punch and die clearance,friction coefficient between punch and sheet,friction coefficient between die and sheet.The maximum thinning ratio increased with the increase of blank-holder force and punch rate,and showing a trend of first increase and then decrease with the increase of punch and die clearance and friction coefficient between sheet and die and plate.The optimized forming process parameters were applied to deep drawing process of AZ31 magnesium alloy sheet and qualified stamping was obtained,which verified the accuracy of finite element simulation.
【Fund】: 重庆市自然科学基金资助项目(CSTC2009BB4186)
【CateGory Index】: TG386.1
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 LUO Zhi-gao,FAN Bin-bin,GUO Xiao-dong,MA Chao(School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Parameter optimization of stamping process for bucket based on orthogonal experiment[J];Die & Mould Industry;2008-11
2 ZAHNG Xian-hong,CUI Zhen-shan,RUAN Xue-yu(Dept. of Plasticity Forming Eng., Shanghai Jiaotong Univ., Shanghai 200030, China);Warm Forging of Magnesium Alloys: the Formability and Flow Stress of AZ31B[J];Journal of Shanghai Jiaotong University;2003-12
3 ZHANG Kai-feng, YIN De-liang, WU De-zhong, JIANG Shao-song(School of Material Science and Technology, Harbin Institute of Technology, Harbin 150001, China);Deep drawability of AZ31 magnesium alloy sheets at elevated temperatures[J];The Chinese Journal of Nonferrous Metals;2003-06
4 ZHANG Qing-lai~1, LU Chen~1, ZHU Yan-ping~1, DING Wen-jiang~1, HE Ji-hong~2 , Shanghai 200030, China; 2. Shanghai Iron and Steel Research Institute, Shanghai 200940, China);Effect of rolling method on microstructure and properties of AZ31 magnesium alloy thin sheet[J];The Chinese Journal of Nonferrous Metals;2004-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAO Xue song, LI Wen jiang(Dept. of Mech. Engn., Anhui Institute of Mechanical and Electrical Engineering,Wuhu 241000, China);Processing of the Ni—Cr alloy by pulse current electro chemical polishing[J];Journal of Anhui Institute of Mechanical and Electrical Engineering;2002-01
2 CHEN Hong-jun,XIA Xian-ming,ZHANG Hua(College Mechatronics and Vehicle of Engineering,Anhui Science and Technology University,Fengyang 233100,China);Research on Tensile Property of AZ91D Magnesium Alloy Sheet at Heating Temperature[J];Journal of Anhui Science and Technology University;2012-01
3 XIAO Pan,LIU Tian-mo(College of Material Science and Engineering,Chongqing University,Chongqing 400044,China);Study on hot compression deformation simulation of AZ61B magnesium alloy[J];Ordnance Material Science and Engineering;2006-04
4 YE Yong-nan, LIU Jun, GUO Xue-feng, XU Chun-jie, ZHANG Zhong-ming (School of Materials Science and Engineering, Xi’an University of Technology, Xi’an 710048,China);Numerical simulation on reciprocating extrusion of AZ31 alloy by thermal-mechanical coupling method[J];Ordnance Material Science and Engineering;2007-06
5 QU Jiahui,YUE Mingkai,LIU Ye (School of Equipment Engineering,Shenyang University of Science and Technology,Shenyang 110168,China);Research achievements of plastic deformation mechanisms on magnesium alloys[J];Ordnance Material Science and Engineering;2009-02
6 ZHANG Dingfei1,2,FANG Lin1,2,LIU Guoping3,DAI Qingwei1,2(1.College of Materials Science and Engineering,Chongqing University,Chongqing 400045,China;2.National Engineering Research Center for Magnesium Alloys,Chongqing University,Chongqing 400044,China,3.Chongqing Changke Urban Railway Vehicle Limited Company,Chongqing 401133,China);Research progress in rolling technology and process for magnesium alloy sheets[J];Ordnance Material Science and Engineering;2010-05
7 KONG Xiangfeng,QUAN Gaofeng,YANG Chaofan (Liaoning Province Laboratory of Key Materials for Railway,School of Materials Science and Engineering,Dalian Jiaotong University,Dalian 116028,China);Effects of extrusion ratio on breadth extrusion of Mg alloy[J];Ordnance Material Science and Engineering;2011-03
8 LIU Jun1,GUO Xuefeng2,ZHANG Zhongming1,YE Yongnan1(1.School of Materials Science and Engineering,Xi′an University of Technology,Xi′an 710048,China; 2.School of Materials Science and Engineering,Henan Polytechnic University,Jiaozuo 454000,China);Finite-element simulation during reciprocating extrusion process of magnesium alloy[J];Ordnance Material Science and Engineering;2011-06
9 REN Fumin,ZHANG Yulei,NIU Muchen,GAO Ming,ZHOU Yanmei,YU Xiaohua(School of Civil Engineering,Beijing Jiaotong University,Beijing 100044,China);Orthogonal Test Study of Preparation Technology for Derived Fuel from Refuse in Railway Stations and Trains[J];Journal of Beijing Jiaotong University;2008-04
10 ZU En-dong,YE Dong,YANG Gui-hong(Faculty of Materials and Metallurgical Engineering,Kunming University of Science and Technology,Kunming 650093,China);Study on Technology of Blue Dyed Pearl[J];Journal of Gems & Gemmology;2007-01
China Proceedings of conference Full-text Database 6 Hits
1 Wei Li1 Fu Zhongliang 2, Li Changkun 3 Wang Xinpeng4 (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
2 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
3 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng (College of Material Science and Engineering of Chongqing University, Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
4 Tuo Hongzhang Xiong Changguo Yi Wenyu Ying Qian Cheng Fangping Xie Zuqi(Sichuan agricultural machinery research institute, Sichuan Chengdu, 610066, China);Study on Cultivars Screening of Late Rice Mechanization Planting in Hilly Region[A];[C];2011
5 WU Pei,WANG Peng-Cheng (College of Materials Science and Engineering,Inner Mongolia University of Technology,Hohhot 010051);Hot Drawing Process of Circular Cup Parts for AZ31 Magnesium Alloy Sheets[A];[C];2009
6 Wei Li Fu Zhongliang Li Changkun Wang Xinpeng(College of Material Science and Engineering of Chongqing University,Chongqing 400044);The Factors of Effecting the Punching Properties of Megnesium Alloys[A];[C];2009
【Secondary Citations】
Chinese Journal Full-text Database 8 Hits
1 Wei Yinhong, Wang Qudong, Zhou Haitao Zhu Yanping, Ding Wenjiang, Y. Chino , M. Mabuchi  (The National Engineering Research Center of Light Metal Net Forming, College of Materials Science and Engineering, Shanghai Jiaotong University, Shanghai 200030) (  Institute for Structural and Engineering Materials, Nagoya 462~8510, Japan);Superplasticities of Rolled AZ91 Magnesium Alloys[J];High Technology Letters;2002-09
2 Zap Zhishou; Gu Jialin; Chen Nanping(Tsinghua University,Beijing 100084,PRC);On the Texture Controlling Methods and Mechanical Property Anisotropy in Commercially Pure Titanium Sheet[J];MATERIALS FOR MECHANICAL ENGINEERING;1994-06
3 LI Xiu-hua (Aviation and astronarigation college, Shenyang Institute of Aeronautical Engineering,Liaoning Shenyang 110034 );Study on wrinkling in wheet metal drawing process and the method to avoid wrinkling[J];Journal of Shenyang Institute of Aeronautcal Engineering;2005-03
4 YU Kun,LI Wen-xian (Department of Materials Science and Engineering,Central South University,Changsha 410083,China);Microstructures and Properties of Mg-Al-Zn Wrought Alloys in As-rolling and Annealing States[J];Heat Treatment of Metals;2002-05
5 TAO You-rui 1,2 ZHANG Fu-quan1 HUANG Chang-qing1 (1.School of Material Science and Engineering ,Hunan University, Hunan 410082) (2.Department of Mechanical Engineering ,Hunan Institute of Engineering, Hunan 411104);Investigation for critical side-wall wrinkle BHF of the hemisphere-shaped workpiece in the process of stamping[J];Journal of Plasticity Engineering;2004-01
6 YU Yan-dong 1, 2 , ZHANG Kai-feng 1, JIANG Da-ming 1, ZHENG Hai-rong 1, WANG Chang-li 1 (1.School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China; 2.School of Mechanical and Power Engineering, Harbin Science and Technology Univ ersity, Harbin 150008, China);Superplasticity and superplastic bulging capability of rolled magnesium alloy[J];The Chinese Journal of Nonferrous Metals;2003-01
7 YU Kun, LI Wenxian, WANG Richu, MA Zhengqing (School of Materials Science and Engineering, Central South University, Changsha 410083, China);Research, development and application of wrought magnesium alloys[J];The Chinese Journal of Nonferrous Metals;2003-02
8 WANG Ling-yun, HUANG Guang-sheng, FAN Yong-ge, HUANG Guang-jie (College of Materials Science and Engineering, Chongqing University, Chongqing 400044, China);Grain refinement of wrought AZ31 magnesium alloy[J];The Chinese Journal of Nonferrous Metals;2003-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved