Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-05
Add to Favorite Get Latest Update

Effect of Welding Rates on Friction Stir Welded Joint Shaping and Microstructure of AZ80 Magnesium Alloy

LI Tie-long1,2,YANG Xin-qi2,WANG Zhen-shan3(1.Department of Mechanical and Electronic Engineering,Yuncheng University,Yuncheng 044000,China; 2.School of Materials Science and Engineering,Tianjin University,Tianjin 300072,China; 3.Shanxi Wenxi Yinguang Magnesium Industry Group,Wenxi 043800,China)  
Friction stir welding was adopted to weld AZ80 magnesium alloy,the effects of welding rates on friction stir welding joint shaping and microstructure were studied under the condition of other parameters unchanging.The results show that the good surface quality and compact weld seam were obtained when the rotation rate was 1 000 r·min-1 and the welding rate was 150 mm·min-1.The dynamic recrystallization grains in the medium of advancing side of nugget zone decreased with the increase of welding rate,and the effect of welding rate on microstructure of thermo-chemical affected zone and heat affected zone was no difference.
【CateGory Index】: TG453.9
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 3 Hits
1 XU Wei-ping, XING Li,KE Li-ming, SUN De-chao (1. Dept. of Civil Engineering Nanchang Institute of Aeronautical Technology, Nanchang 330034,China;2. Dept. of Material, Nanchang Institute of Aeronautical Technology, Nanchang 330034, China);Analysis of the grain orientation and texture of friction stir welded magnesium alloy lap joints[J];Material Science and Technology;2005-03
2 YANG Suyuan,ZHANG Baolei (School of Materials,Beijing Institute of Technology,Beijing 100081,China);Microstructures and mechanical properties of thick AZ31 magnesium alloy welded joint by friction stir welding[J];Transactions of the China Welding Institution;2009-05
3 Ma Chunsheng1 Zhang Zhimin2 Guo Yuming3(1.College of Mechanical Engineering and Automation,North University of China,Taiyuan 030051,China 2.College of Materials Science and Engineering,North University of China,Taiyuan 030051,China 3.College of Engineering,Shanxi Agricultural University,Taigu 030801,China);Technology of Magnesium Alloy Car's Wheel Hub on Spinning Shaping[J];Transactions of the Chinese Society for Agricultural Machinery;2012-03
【Co-citations】
Chinese Journal Full-text Database 6 Hits
1 LI Jun-chu,ZHOU De-sheng,LIU Da-hai,LIU Ge-ping(Shool of Aeronautical Manufacturing Engineeing,Nanchang Hangkong University,Nanchang 330063,China);Friction stir welding and successive heat treatment of T-shaped rib-web parts of 2A12 aluminim alloy[J];Materials Science and Technology;2011-02
2 LI Yan,LU Zhen-hua(Engineering Institute of Tianshui normal university,Tianshui 741000,China);Prospects of welding technology for magnesium alloy[J];Electric Welding Machine;2011-05
3 ZHANG Zhao1, 2 LIU Yali1, 2(1.Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024;2.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024);Effect of Preheating Time on Friction Stir Welding[J];Journal of Mechanical Engineering;2009-04
4 LIU Da-hai,LI Jun-chu,XIONG Hong-miao,LIU Ge-ping(School of Aeronautical Manufacturing Engineering,Nanchang Hangkong University,Nanchang 330063,China);Friction stir welding of 2A12 aluminum rib-web parts and creep age forming after welding[J];Transactions of Materials and Heat Treatment;2013-02
5 HU Yaobo1,2,ZHAO Chong1,2,DENG Juan1,2(1.College of Materials Science and Engineering,Chongqing University,Chongqing 400044,China;2.National Engineering Research Center for Magnesium Alloys,Chongqing 400044,China);Research Status and Prospects of Magnesium Alloys Welding Technology[J];Hot Working Technology;2010-13
6 XIONG Feng,ZHANG Datong,YAN Yong,QIU Cheng(School of Mechanical & Automotive Engineering,South China University of Technology,Guangzhou 510640,China);Influence of Welding Parameters on Microstructure and Mechanical Properties of Welded Joints of AZ31 Alloy by Friction Stir Weld[J];Hot Working Technology;2011-01
China Proceedings of conference Full-text Database 1 Hits
1 Wang Xin~1,Zhang Chun~1,Liu Dan-dan~2 (l.Tianjin Tianduan Press Co.,Ltd.,Tianjin 300142,China;2.Tianjin University of Technology,School of Materials Science and Engineering,Tianjin 300384,China);The Rigidity Detection Study on Ton Hot Forming Hydraulic Press applying to Automobile Wheel Hub[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LI Tian-sheng,XU Hui (Hunan Institute of Technology,Hengyang 421008,China);Research into magnesium alloy forming technology and its developing status quo[J];Materials Research and Application;2007-02
2 Qian Lijun Xu Fei(School of Machinery and Automobile Engineering,Hefei University of Technology,Hefei 230009,China);Forward Modeling and Simulation on Vehicle Equipped with CVT[J];Transactions of the Chinese Society for Agricultural Machinery;2009-07
3 Hu Zhiqing1,2 Li Mingzhe2 Sui Zhen3 Guan Wenyu4(1.Institute of Mechanical Science and Engineering,Jilin University,Changchun 130025,China 2.Roll Forging Research Institute,Jilin University,Changchun 130025,China 3.School of Communication Engineering,Jilin University,Changchun 130025,China 4.YTO Engine Machinery Company,Luoyang 471004,China);Spinning Technology Based on Principle of Continuous Multipoint Forming[J];Transactions of the Chinese Society for Agricultural Machinery;2009-12
4 Ye Hui1 Hu Ping2 Shen Guozhe2 Sun Hongtu2 Liu Bo3 Zhou Dinglu3(1.State Key Laboratory of Automobile Dynamic Simulation,Jilin University,Changchun 130025,China 2.School of Automotive Engineering,Dalian University of Technology,Dalian 116024,China3.Changan Academy of Automotive Engineering,Chongqing 401122,China);Lightweight Optimization Design of Car Body Based on Sensitivity and Side Crash Simulation[J];Transactions of the Chinese Society for Agricultural Machinery;2010-10
5 Han Jiaying1,2 Wang Taiyong1 Li Qing1 Zheng Huijiang1(1.College of Mechanical Engineering,Tianjin University,Tianjin 300072,China 2.College of Maritime,Tianjin University of Technology,Tianjin 300191,China);A Cutting Simulation Algorithm of Spiral Bevel Gears Based on Analytic Calculation[J];Transactions of the Chinese Society for Agricultural Machinery;2010-12
6 HE Yan-song,YANG Cheng (Chongqing University Automotive Engineering Department ,Chongqing400044,China);Application of Magnesium Alloy in Automotive Industry[J];Automobile Technology & Material;2002-06
7 GAO Lun (Beijing Smeltery Factory,Beijing 100053,China);Exploit and Application of Magnesium Alloy Forming Technology[J];Light Alloy Fabrication Technology;2004-03
8 CHEN Fang-lei,ZHANG Zhi-min,CAO Ya-qiang(Dept. of Material Engineering,North University of China,Taiyuan 030051,China);Forming Process and Numerical Simulation of Magnesian Alloy Auto Hub[J];Hot Working Technology;2007-01
9 GUO Qiang YAN Hong-ge CHEN Zhen-hua ZHANG Hui(School of Materials Science and Engineering,Hunan University,410082 China);Hot deformation behaviors of as-cast AZ80 Magnesium alloy at elevated temperatures[J];Journal of Plasticity Engineering;2006-05
10 CHENG Xiu-quan(Guangzhou Civil Aviation College,Guangzhou 510403 China)CHEN Jia-hua XIA Qin-xiang ZHANG Shi-jun(South China University of Technology,Guangzhou 510640 China);Finite element numerical simulation and experimental research on the forming force of mandreless neck-spinning with single roller[J];Journal of Plasticity Engineering;2007-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved