Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-05
Add to Favorite Get Latest Update

Friction and Wear Properties of a Cr-Ni Alloy Prepared by Powder Metallurgy before and after Heat Treatment

LI Li1,DUAN Zheng2,SHI Hui-ji2(1.Institute of Mechanical Engineering,Inner Mongolia University for Nationalities,Tongliao 028043,China; 2.School of Aerospace,Tsinghua University,Beijing 100084,China)  
A Cr-Ni alloy was prepared by powders metallurgy process(25 MPa cold isostatic pressing,1 200 ℃×20 min sintering)and then was heat treated(1 259 ℃×1 h+1 080 ℃×1 h,furnace cooling),and its friction and wear properties before and after heat treatment were studied.The results show that the heat treatment could increase the friction and wear properties of the tested alloy and decrease the sensibility of friction coefficient temperature.
【CateGory Index】: TF124
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 CHEN Yong-xiong, XU Bin-shi, LIU Yan, LIANG Xiu-bing, XU Yi National Key Laboratory for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China;Structure and sliding wear behavior of 321 stainless steel/Al composite coating deposited by high velocity arc spraying technique[J];中国有色金属学会会刊(英文版);2008-03
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Wu Yin, Long Chunguang(Institute of Automobile and Mechanical Engineering, Changsha University of Science and Technology, Changsha 410114, China);PREPARATION OF RAMIE FIBER REINFORCED PESU COMPOSITE AND ITS TRIBOLOGY PROPERTY[J];Engineering Plastics Application;2010-05
2 Cui Yong,Hu Guangyuan(Cold Rolled Sheet Mill of Bengang Posco Co.,Ltd.,Benxi 117000,Liaoning,China);Effect of Chromium Coating on Roll Surface on Lubricating to Deformation Zone in Cold Rolling[J];Angang Technology;2011-01
3 QIN Libai1,SHU Tingfu1,ZHANG Shuyong2,REN Zheng1,HU Lianka1,HUANG Wenshu3,LI Yan1,ZHANG Hua,LIU Huanen1(1.Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China;2.China North Engine Research Institute,Datong 037036,China;3.Baotou Beiben Heavy Duty Truck Limited Company,Baotou 014032,China);Wear property of high-silicon aluminium alloy cylinder sleeve[J];Ordnance Material Science and Engineering;2010-06
4 SU Hong, MAO Jun, XUE Lin (School of Civil Engineering and Architecture, Northern Jiaotong University, Beijing 100044,China);Research and Experiment on A Compound Sliding Bearing[J];Journal of Northern Jiaotong University;2003-04
5 YIN Jun-hui,ZHENG Jian,NI Xin-hua,JIA Chang-zhi,CUI Kai-bo(Department of Artillery Engineering,Ordnance Engineering College,Shijiazhuang 050003,Hebei,China);Research on Macroscopic and Microscopic Mechanism of Plastic Deformation of Bearing Band[J];Acta Armamentarii;2012-06
6 Li Xiaozhi Li Yaowen Zhou Tingxuan Xie Yongsong Fang Weirong Chen Jihua (Sichuan Institute of Technology);Friction and Wear Performance of Self-fluxing Alloy Powder for Oxygen-Acetylene Thermal Spray Coating[J];Journal of Beijing Agricultural Engineering University;1995-01
7 ZHANG Zhao-hui~1, WANG Fu-chi~1,- ZHOU Xin-ping~2, ZHANG Heng~3(1.School of Materials Science and Engineering, Beijing Institute of Technology, Beijing100081, China; 2.Industrial Department, Henan Industry University, Zhengzhou, Henan450007, China; 3.Composite Materials Research Center of Mechanical School, Zhengzhou University, Zhengzhou, Henan450052, China);Lubrication Problems Among Members Made Up of Fiber Reinforced Epoxy Composites[J];Journal of Beijing Institute of Technology;2005-09
8 WANG Li-yong,MA Biao,LI He-yan,ZHENG Chang-song(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Wearing of Wet Shifting Clutch Friction Discs[J];Transactions of Beijing Institute of Technology;2008-04
9 JIANG Guang-peng,XU Yong-dong,ZHANG Jun-zhan (Lab of Thermostructure Composite Materials,Northwestern Polytechnical University,Xian 710072,China);MICROSTRUCTURE AND FRICTION PROPERTY OF C/SIC COMPOSITE MADE BY REACTIVE MELT IN FILTRATION[J];Fiber Reinforced Plastics/Composite;2005-01
10 HU Bin,HU Fang-you,HUANG Xu-ren,CUI Ai-yong,LU Chang-liang,HUANG Jun-lei(Qingdao Branch of Naval Aeronautical Engineering Institude,Qingdao Shandong 266041);Microstructure and Wear-resisting Property of NiCrMoNb Laser Cladding on GH710[J];China Surface Engineering;2011-03
China Proceedings of conference Full-text Database 10 Hits
1 Liang Liang1,2,Peng Hui1,Gan Min1 1.College of Information Science and Engineering,Central South University,Changsha 410083,P.R.China2.Department of Mechanical & Electrical Engineering,Changsha University,Changsha 410003,P.R.China;Kinetic Modeling and Spiral Groove Optimization of Medical Micro-Robot[A];[C];2007
2 Wang Yuanuyuan~1,Xiong Chunhua~(2、3),Qiao Xiaoxi~1,Xu Jinlong~3,Zhao Wei~3,Zhang Xiangjun~(1*) (1.State Key Lab of Tribology.Tsinghua University,Beijing,100084 China;2 CHINA UNIVERSTTY OF GEOSCIENCES, Beijing,100083 China;3.POL Research Institute of General Logistics Dept.Beijing 102300,China);Investigation on the high-temperature lubrication property of oil using SRV[A];[C];2011
3 SHE Zhi-chang,YAO Ping-ping,FAN Kun-yang,DING Li (State Key Laboratory of Powder Metallurgy,Central South University,Changsha 410083,China);Effect of the low melting glass powder on copper matrix friction material apply to wind turbine generator system[A];[C];2011
4 ZHENG Yi~1 TIAN Shu-feng~2 ZHAO Liang~3 (1.Department of Technical Support Engineering,Academy of Armored Force Engineering,Beijing 00072,China;2.Military Commissary Department at the 618 Manufactory of People's Liberation Army of China,Beijing 100072,China;3.Multimedia Education Center,Academy of Armored Force Technique,Jilin Changchun 130117,China);Wear Failure Analysis of Ball Groove of Master Clutch's Release Device[A];[C];2007
5 QIU Hai-zhe~1 YAN Hua~1 WANG Xue-mei~1 ZHANG Ping~(2,3) LIU Qi~(2,3) TANG Long~(2,3)(1.Department of Petrolchemistry,Logistic Engineering University,Chongqing 400016,China;2.National Instrument Materials Engineering Technology Research Center,Chongqing 400700,China;3.Chongqing Instrument Material Research Institute,Chongqing 400700,China);The Influence of different additives on tribological properties of carbonyl iron-based magnetorheological fluid[A];[C];2007
6 WANG Xue-mei~1 YAN Hua~1 QIU Hai-zhe~1 ZHANG Ping~(2,3) LIU Qi~(2,3) TANG Long~(2,3) (1.Department of Petrol Chemistry,Logistic Engineering University,Chongqing 400016,China; 2.National Instrument Materials Engineer Technology Research Center,Chongqing 400700,China; 3.Chongqing Instrument Material Research Institute,Chongqing 400700,China);Tribological properties of carbonyl iron-based magnetorheological fluid[A];[C];2007
7 HU Zhi-de,YAN Hua (Department of Chemistry and Material Engineering,Logistic Engineering University, Chongqing 401311,China);Tribological properties of magnetorheological fluid under different magnetic field[A];[C];2010
8 YAO Chun - de, HUANG Yu, ZHOU Hong - xiu, LIU Xiao - ping ( State Key Laboratory of Engines , Tianjin University, Tianjin 300072, China);STUDY ON TRIBOLOGICAL BEHAVIOR OF BIO- ADDITIVE[A];[C];2006
9 Li Maosheng (Guangzhou Mechanical Engineering Research Institute, Guangzhou 510700,China);Industrial Tribology and Lubricants in China[A];[C];2009
10 Lin Qiang;Effect of resin in reducing the wear of semimetal friction materials[A];[C];2007
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 XING Zhong,JIANG Ai-liang,XIE Jian-jun,FENG Yi-cheng (Jinan FuQiang Power CO.,LTD. Jinan 250002);Benefit analysis and Surface Engineering Application of Automobile Engine Remanufacturing[J];China Surface Engineering;2004-04
2 LI Ping, WANG Han-gong (The Second Artillery Engineering College, Xi'an 710025, China);Study of Slide Wear Resistance Properties of Coatings Ti-Al Twin Wires Ultrasonic Arc Sprayed[J];Journal of Materials Engineering;2004-11
3 LI Pei-wu1, SUN Kang-ning1, LI Ai-min1, LI Zhong-you1, LIU Xiu-zhong1, LUAN Xin-ming2, XU Xiu-li2(1. Material Science and Engineering Institute, Shandong University(South Campus), Jinan 250061, China;2. Qingdao Metalforming Machinery Group Corporation, Qingdao 266300, China);Characteristics of deformation joining of aluminum-stainless steel composite sheet[J];中国有色金属学会会刊(英文版);2003-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved