Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-05
Add to Favorite Get Latest Update

Creep Ageing Behavior and Constitutive Equation of 2524 Aluminum Alloy

ZHAN Li-hua,LI Jie,HUANG Ming-hui(State Key Laboratory of High Performance and Complex Manufacturing,School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China)  
The creep ageing behavior of 2524 aluminum alloy was studied at ageing temperature range from 453 K to 473 K and stress range from 140 MPa to 210 MPa using electronic creep testing machine.By adopting the equations including hyperbolic sine function and by linear regression analysis of experimental data,the constitutive relationship among steady creep strain rate,tested stress and ageing temperature of 2524 aluminum alloy was obtained.The results show that steady creep rate increased with the increase of tested stress and ageing temperature,and the second step in creep curves became short.The relative error of steady creep strain rate between theoretical value computed by the constitutive equation and actual value was only 6.9%,and the constitutive equation could provide theoretical basis for formulating creep ageing forming processing of 2524 aluminum alloy.
【Fund】: 国家自然科学基金重点资助项目(2010CB731702)
【CateGory Index】: TG146.21
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 Du Xiaodong (Hefei University of Technology, Hefei Anhui 230009,PRC);Influence of Zr on the Creep Behaviours of Al Wire[J];Materials For Mechanical Engineering;1997-05
2 LIU Yu-hui, SHI Zhi-qiang, LI Shi-chun (University of Petroleum, Dongying 257061, China);Superplastic Deformation of Rolled Zn-5Al-RE Alloy[J];Materials For Mechanical Engineering;2004-05
3 QI Yihui, GUO Jianting, CUI Chuanyong Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016 Department of Material Engineering, Liaoning Institute of Technology, Jinzhou 121001 correspondent:GUO Jianting, professor, Tel: (O24)23843;HIGH TEMPERATURE CREEP OF NiAl-Cr(Zr) INTER-METALLIC ALLOY[J];Acta Metallrugica Sinica;2001-09
4 YAN Jingli SUN Yangshan XUE Feng Jiangsu Key Laboratory for Advanced Metallic Materials,Southeaat University,Nanjing 211189 TAO Weijian Nanjing Welbow Metals Co.,Ltd.,Nanjing 211221;AN INVESTIGATION ON THE CREEP BEHAVIOR OF PURE Mg[J];Acta Metallurgica Sinica;2008-11
5 LIU Bing,PENG Chao-qun,WANG Ri-chu,WANG Xiao-feng,LI Ting-ting(School of Materials Science and Engineering,Central South University,Changsha 410083,China);Recent development and prospects for giant plane aluminum alloys[J];The Chinese Journal of Nonferrous Metals;2010-09
Chinese Journal Full-text Database 10 Hits
1 JIANG Song et al (School of Food and Biological Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013);Study on the Basic Rheological Property of Soy Protein Isolate Gel in Standing Period[J];Journal of Anhui Agricultural Sciences;2008-20
3 ZHAO Yu-cong,ZHANG Li-na(Shaanxi University of Science & Technology,Xi'an 710021,China);Design of Creep Test System Based on Sound Card and LabVIEW Software[J];Packaging Engineering;2011-19
4 SUN Zhenqi,HUANG Minghui (School of Mechanical and Electrical Engineering,Central South University,Changsha 410083);Review of Surface Treatment for Aluminum Alloy[J];Materials Review;2011-23
5 JIN Yao,SUN Ya fang,SUN Xun fang (Department of Applied Mechanics and Engineering, Southwest Jiaotong University,Chengdu 610031,China) DENG Yong,LIU Hong jie,TU Yong (Institute of Material, Dongfang Boiler Works,Zigong 643011,China);Study on Creep Law of Metal[J];Journal of Materials Engineering;2001-01
6 LIU Wei,GAO Zong-zhan,LIU Yong-shou,YUE Zhu-feng(School of Mechanics,Civil Engineering & Architecture,Northwestern Polytechnical University,Xi'an 710072,China);Experimental Study of Creep Behaviors of MDYB-3 PMMA Under Different Temperatures[J];Journal of Materials Engineering;2009-07
7 Zhang Li1, Xu Hong1, Ma Qiulin2, Wang Zhiwen1 (1. Key Laboratory for Safety Science of Pressurized System of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China) (2. Yangzi Petrochemical Company Limited, Nanjing 210048, China);Low-Temperature Creep Behavior of Commercially Pure Titanium TA2[J];Rare Metal Materials and Engineering;2008-12
8 Liu Xiao1,3,Lu Tiecheng1,Xing Zhonghu2,Qian Dazhi3(1.Key Laboratory of Radiation Physics and Technology,Ministry of Education,Sichuan University,Chengdu 610064,China)(2.Nuclear Power Institute of China,Chengdu 610041,China)(3.China Academy of Engineering Physics,Mianyang 621900,China);Effects of Different Irradiation Conditions on Swelling Performance of U_(10)Mo-Al Dispersion Fuel[J];Rare Metal Materials and Engineering;2011-06
9 ZHANG Bin,ZHAO Yinghua(Institute of Road and Bridge Engineering,Dalian Maritime University,Dalian 116026,China);Viscoelastic dynamic response analysis of vehicle overload acing on asphalt pavement[J];Journal of Dalian Maritime University;2012-02
10 SHI Jing yuan, YANG Yu, SUN Qing, HU Xian yue (Shanghai Power Equipment Research Institute, Shanghai 200240, China);Study on The Life Design Technology for Valve Housings of Large Capacity Steam Turbine[J];Power Engineering;2001-01
China Proceedings of conference Full-text Database 5 Hits
1 ZHANG Wen-quan,ZHANG Xue-kun (College of Materials Science and Engineering,Beijing University of Technology, Beijing 100022,the People's Republic of China);Notch deformation behaviors of metallic material during tensile testing[A];[C];2007
2 ;Creep Behavior of Carbon Fiber/Epoxy Composites Based on Nanoindentation Experiment[A];[C];2012
3 MO Ya-fei (China Institute of Atomic Energy, Beijing 102413);The Research on Creep Constitutive Model of CEFR Pressure Vessel Material at High Temperature[A];[C];2012
4 CHU Qiaoling,LI Jihong,ZHANG Xingxuan,FAN Wenjing,WU Weigang,ZHANG Min (Xi'an University of Technology,Xi'an 710048,China);Numerical simulation of residual stress after post-weld heat treatment in Large Turbine Machine Cabinet[A];[C];2013
5 Xie Yonghui,Chang Jiaojiao,Zhang Minghui,Zhang Di,Feng Zhenping School of Energy and Power Engineering,Xi'an Jiaotong University,Xi'an 710049;Numerical study on creep properties of the high temperature blade for large power steam turbine[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ;New High-strength Aluminium Alloys for Aeronautic Facilities[J];Materials Review;1997-06
2 Song RenguoCenter of Materials Physics and Chemistry Research,College of Science, Beijing University of Aeronautics & Astronautics,Beijing 100083;Current Status and Trends in High Strength Aluminum Alloy Research[J];Materials Review;2000-01
3 Wang Qudong Zeng Xiaoqin Lu Yizhen Ding Wenjiang (College of Materials Science and Engineering,Shanghai Jiaotong University,Shanghai 200030);Study and Application of Elevated Temperature Cast Magnesium Alloy[J];Materials Review;2000-03
4 HUANG Lanping ZHENG Ziqiao LI Shichen JIANG Na FAN Yunqiang XIE Shaojun (Department of Materials Science and Engineering,Central South University,Changsha 410083) (Southwest Aluminum Fabrication Plant China,Chongqing 401326);Study and Application of Aluminum-Lithium Alloy[J];Materials Review;2002-05
5 YIN Dengfeng ZHENG Ziqiao (College of Materials Science and Engineering,Central South University,Changsha 410083);History and Current Status of Aluminum-Lithium Alloys Research and Development[J];Materials Review;2003-02
6 YANG Shoujie DAI Shenglong (Beijing Institute of Aeronautical Materials,Beijing 100095);A Glimpse at the Development and Application of Aluminum Alloys in Aviation Industry[J];Materials Review;2005-02
7 WANG Hong, FU Gaofeng, SUN Gihong, LI Xingjie, JIANG Lan(School of Materials and Metallurgy, Northeastern University, Shenyang 110004);Present Research and Developing Trends of Ultra High Strength Aluminum Alloys[J];Materials Review;2006-02
8 GAO Honglin,WU Guoyuan(Material Science and Engineering Department,Yunnan University,Kunming 650091);Research Progress in Al-Li Alloys[J];Materials Review;2007-06
9 YANG Shou jie,LU Zheng,SU Bin,Dai Sheng long,LIU Bo cao,Yan Ming gao (Institute of Aeronautical Materials, Beijing 100095,China);Development of Aluminum-Lithium Alloys[J];Journal of Materials Engineering;2001-05
10 GUO Yun-shu1,PAN Qing-lin1,NIE Bo2,HE Zhen-bo2,YIN Zhi-min1(1 School of Materials Science and Engineering,Central South University,Changsha 410083,China;2 Northeast Light Alloy Co.,Ltd.,Harbin 150060,China);Investigation on Aging of 2A23 Alloy for Age-forming[J];Journal of Materials Engineering;2009-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved