Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2013-10
Add to Favorite Get Latest Update

Effect of Erosion-Abrasion Condition on Erosion-Abrasion Wear Properties of Eutectic Al-Mn Alloy Based Composite

ZHANG Man;LIU Bing;School of Mechanical Engineering,Xinjiang University;  
The erosion-abrasion wear properties of eutectic Al-Mn alloy and its Al2 O3 particle reinforced composites were studied at erosion-abrasion rate of 7m·s-1 and 15m·s-1 in rotating erosion-abrasion wear test, and the microstructure characteristics and the worn surface of the materials after erosion-abrasion wear test were analyzed.The results show that,the cast Al-Mn alloy was composed of Al-Mn solid solution,MnAl6 and Al11 Mn4 phase,while Al2 O3 particles appeared in the composite besides the aforementioned microstructure.The wear rate at the erosion-abrasion rate of 15m·s-1 was 20to 30times as large as the wear rate at the erosion-abrasion rate of 7m ·s-1 for two materials.And the major factor of wear rate was erosion-abrasion rate.The wear rates of both materials were higher with 3% abrasive addition than with 1% abrasive addition,and exhibited increase first then decline with increase of abrasive diameter.The maximum wear rate moved toward the abrasive in larger diameter with increase of erosion-abrasion rate when abrasive addition was 1%.The Al2 O3 particle reinforced composite exhibited a good erosion-abrasion wear resistance because of dispersion strengthening of Al2 O3 particles distributed uniformly in matrix at same erosion-abrasion conditions.
【Fund】: 国家自然科学基金资助项目(50861008)
【CateGory Index】: TB331
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 7 Hits
1 JIN Peng1,LIU Yue1,2,LI Shu1,XIAO Bolu1(1 Institute of Metal Research,The Chinese Academy of Sciences,Shenyang 110016;2 School of Material and Metallurgy,Northeastern University,Shenyang 110004);Aerospace Applications of Particulate Reinforced Aluminum Matrix Composites[J];Materials Review;2009-11
2 Zheng Xiyu Liu Jianhua (Institute of Salt Lakes, Xi'an Branch, Academia Sinica, Xi'an 710043);THE COMPOSITION AND ORIGIN OF SALT LAKE BRINES IN XINJIANG[J];Scientia Geographica Sinica;1996-02
3 SHI Min,LIU Bing,SUN Jinmei(College of Mechanical Engineering,Xinjiang University,Urumqi 830047,China);Effect of Mn Content on Impact Toughness and Metallurgical Microstructure of Al-Mn Alloy[J];Hot Working Technology;2010-18
4 Guo Lu,Liu Bing(College of Mechanical Engineering,Xinjiang University);Erosion Wear Properties of Hypereutectic Al-Mn Matrix Composites[J];Special Casting & Nonferrous Alloys;2012-04
5 Li Zhikun Fan Jianchun Zhang Jixin Zhan Xianjue(China University of Petroleum(Beijing),Beijing 102249,China);Study on Performance of Erosive Wear of 20CrNiMo[J];Lubrication Engineering;2012-09
6 Fan Zili Wang Xipeng(Xinjiang Institute of Biology, Pedology and Psammology, Chinese Academy of Sciences);WATER SALINIZATION OF PLAIN LAKES (INCLUDING MAN-MADE LAKES) AND ITS PREVENTION AND CONTROL IN XINJIANG[J];Journal of Natural Resources;1990-04
7 DAI Ting-hai,LIU Bing,ZHANG Dong-qin,FANG Jia (School of Mechanical Engineering,Xinjiang University,Urumqi 830008,China);Study on Flush Erosion Wear Resistant Properties of Al-Mn Matrix Composite Materials Under Different Test Parameters[J];Foundry Technology;2010-08
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Pan Chunxu,Chen Li;STUDY OF RELATIONSHIP BETWEEN MICROSTRUCTURES ANDWEARABILITY OF OVERLAY JOINTS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;2000-02
2 PEI Hai - xu , WANG Sheng, YI Ying - tun (P.O. Box4,Baotou 014034, China);Optimum design of a new type of resistant to wear and anti - crack bead welding rod[J];Ordnance Material Science and Engineering;2003-04
3 GUO Liang, DING Hou -fu, DU Xiao - dong, YAN Xiao - chong (College of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China);Comparison of corrosive impact abrasion behavior between low carbon high alloy steel and high manganese steel[J];Ordnance Material Science and Engineering;2005-02
4 XIANG Dong, XU Bin, LIU Ke-gao (Dept. of Material Science and Engineering, Shandong University of Architecture and Engineering, Jinan 250014,China);Microstructures and wear properties of 2014 aluminium alloys after solution treatment[J];Ordnance Material Science and Engineering;2005-05
5 XU Shu-zhen1,2,DU Xiao-dong2,WANG Yi-fei2,WANG Rui-jun2,Wang Lan2 (1.Department of Construction Machinery,Shandong Jiaotong University,Ji’nan 250023,China; 2.School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China);Influence of carbon and manganese on microstructure and properties of wet grinder's lining board[J];Ordnance Material Science and Engineering;2008-06
6 ZHOU Chongguang1,LIU Guoxiao1,MIAO Meirun1,HE Yong1,PENG Linhua2,YAN Yao3,XIE Zhiping4(1.Ningbo Branch of China Acadamy of Ordnance Science,Ningbo 315103,China;2.Institute of Mechanics Research,Chinese Academy of Sciences,Beijing 100080,China;3.Lanzhou Institute of Chemical Physics,Chinese Academy of Sciences,Lanzhou 730000,China;4.Baotou North Chuangye Limited Company,Inner Mongolia First Machinery Group,Baotou 014032,China);Effect of laser-texturing on crystal orientation and frictional and wearing behavior of Cr-plated coatings[J];Ordnance Material Science and Engineering;2010-04
7 Xu Guizhen; Liu Jiajun; Ma Xiao-hua; Zhou Zhongrong;The Fretting Wear Behavior of Various Surface Techniques on 1045 Steel[J];CHINA SURFACE ENGINEERIGN;1999-02
8 YANG Hai-feng, ZHOU Xin-yu, ZHANG Hong-sheng, LI Jie, HAI Jin-tao;Two Methods of Friction Coefficient prediction of sliding bearing materials[J];China Surface Engineering;2002-03
9 DAI Zhong-hua,ZHAO Wen-zhen,HUANG An (1.School of Materials Science and Engineering, Xi抋n Jiaotong University, Xi抋n 710049;2. TongLing Nonferrous Metal Company,Tongling 244000);A Study of Wear Characteristics of Selffluxing Alloy Spraywelding Overlay for Deep Well Drilling Rod[J];China Surface Engineering;2003-03
10 JIANG Jing-hua 1, JIANG Jian-qing 2, MA Ai-bin 1, ZHANG Xu-hai 2, LIN Ping-hua 1 (1. Department of Materials Science and Engineering, Hohai University, Nanjing 210098, China; 2. Department of Materials Science and Engineering, Southeast University, Nanjing 210096, China);Model Analysis for the Relationship of Nominal Load and the Reducing Friction Behavior of Soft Film on Hard Substrate[J];China Surface Engineering;2008-02
China Proceedings of conference Full-text Database 2 Hits
1 Zhongwen OU,Yuexia LI,Teng PU,Ke HAN,Lu GAO Logistic Engineering University,Chongqing,China,401311;The Wear Behavior and Repair of Friction——The Philosophy Thinking of Friction[A];[C];2011
2 WEN Feng,LIU Bing (College of Mechanical Engineering,Xinjiang University;Urumqi830008);The effects of the abrasive content on Erosion-abrasion Properties of Al-Mn Matrix Composite[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WANG Wen - ming;PAN Fu - sheng;LU Yun;ZENG Su - min College of Materials Science and Engineering, Chongqing University,Chongqing 400044,China Faculty of Engineering,Chiba University,Chiba,Japan Southwest Aluminum Industry(Group) Company,Chongqing 401326, China;Current status of development and application in SiCp/Al composites[J];Ordnance Material Science and Engineering;2004-03
2 Fan Jianzhong;Sang Jimei;Shi Likai, National Engineering & Technology Research Center for Non-Ferrous Metals Composites, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Fabrication, Application and Development of Particle Reinforced Aluminium Matrix Composites[J];Materials Review;2001-10
3 HE Chunlin CAI Qingkui (School of Materials and Metallurgy,Northeastern University,Shenyang 110004) (Department of Materials Science and Engineering,Shenyang University,Shenyang 110044);Recent Developments in Research on Corrosion of Aluminum Metal Matrix Composites[J];Materials Review;2003-01
4 JIN Peng1,LIU Yue1,2,LI Shu1,XIAO Bolu1(1 Institute of Metal Research,The Chinese Academy of Sciences,Shenyang 110016;2 School of Material and Metallurgy,Northeastern University,Shenyang 110004);Aerospace Applications of Particulate Reinforced Aluminum Matrix Composites[J];Materials Review;2009-11
5 CUI Yan (Institute of Aeronautical Materials, Beijing 100095, China);Aerospace Applications of Silicon Carbide Particulate Reinforced Aluminium Matrix Composites[J];Journal of Materials Engineering;2002-06
6 P A N M u, L U O Zhi┐ping( State Key Lab.for Materials Synthesis and Com posting, W uhan 430070, China);>Erosion of M aterials[J];MATERIALS SCIENCE AND ENGINEERING;1999-03
7 DONG Gang, ZHANG Jiu-yuan (Institute of Material Science and Technology, Zhejiang University of Technology, Hangzhou 310014,China);Developments of Reserch on the Solid Particle Erosion of Materials[J];Journal of Materials Science and Engineering;2003-02
8 Zheng Xiyu Liu Jianhua (Institute of Salt Lakes, Xi'an Branch, Academia Sinica, Xi'an 710043);THE COMPOSITION AND ORIGIN OF SALT LAKE BRINES IN XINJIANG[J];Scientia Geographica Sinica;1996-02
9 Xinjiang Comprehensive Expedition Team of Wasteland Resources;THE CAUSE OF THE SALINIZATION OF THE BOSITENG LAKE AND THE WAYS OF ITS CONTROL[J];Acta Geographica Sinica;1982-02
10 Fan Zili(Xinjiang Institute of Biology Pedology and Desert)Li Jiang (Xinjiang Institute of Geography);RECENT CHANGES IN THE LAKES OF XINJIANG[J];Geographical Research;1984-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved