Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2015-01
Add to Favorite Get Latest Update

Microstructure and Properties of MgO/Cu Composite Internal Oxidation Layer Prepared on Cu-Mg Alloy Surface

WANG Qing-fu;ZHANG Yan-min;GUO Xiu-hua;SONG Ke-xing;Institute of Materials Science and Engineering,Henan University of Science and Technology,Henan Key Laboratory of Advanced Non-ferrous Metals,Henan Collaborative Innovation Center of Non-ferrous Metal Generic Technology;Institute of Materials Science and Engineering,Xi′an University of Technology;  
MgO/Cu composite internal oxidation layer on Cu-Mg alloy surface was prepared by internal oxidation.The effects of internal oxidation time on the thickness,hardness and electric conductivity of internal oxidation layer as well as the microstructure were studied,and the internal oxidation thermodynamics of Cu-Mg alloy was analyzed,too.The results show that the thickness and electric conductivity of the internal oxide layer increased,the hardness was increased and then decreased with the increase of internal oxidation time.When the internal oxidation time was 10 h,the internal oxidation layer had the best comprehensive properties,the hardness was 123.3HV and electric conductivity was 75.9%IACS.After internal oxidation,the Mg element dissolved in Cu substrate precipitated in the shape of MgO to form internal oxidation layer,and the dispersive distribution of MgO particles was the primary reason of increasing comprehensive properties of internal oxidation layer a lot.The critical oxygen partial pressure of internal oxidation thermodynamics of Cu-Mg alloy 10-31 419/T+5.66-10-17 611/T+12.91.
【Fund】: 国家自然科学基金资助项目(51075122 51345011);; 河南省杰出人才项目(134200510011);; 河南省科技攻关项目(112102210177);; 教育部创新团队发展计划项目(IRT1234)
【CateGory Index】: TB333
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 4 Hits
1 LIU Meng;LI Shun;BAI Shuxin;ZHAO Xun;XIONG Degan;Aerospace Science and Engineering College,National University of Defense Technology;;Progress in SiC_p/Cu Electronic Packaging Materials[J];Materials Review;2013-19
2 Mohammadmehdi Shabani;Mohammad Hossein Paydar;Mohammad Mohsen Moshksar;Department of Materials Science and Engineering, School of Engineering, Shiraz University;;Fabrication and densification enhancement of SiC-particulate-reinforced copper matrix composites prepared via the sinter-forging process[J];矿物冶金与材料学报(英文版);2014-09
3 Li Hongxia;Wang Guoqiang;Song Kexing;Zhang Yanmin;Guo Xiuhua;School of Materials Science and Engineering,Henan University of Science and Technology;Henan Key Laboratory of Adanced Non-Ferrous Materials;Yituo ( Luoyang) Casting Co. ,Ltd.;;Effect of TiB_2 content on electrical erosion resistance of dispersion strengthened TiB_2/Cu composite material[J];Heat Treatment of Metals;2014-03
4 ZENG Shu;SU Zhong-liang;ZHOU Jian;College of Materials,Xiamen University;;Fabrication and Mechanical Properties of Cu-Cr_2 AlC Composites[J];Journal of Xiamen University(Natural Science);2014-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved