Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2015-04
Add to Favorite Get Latest Update

Preparation and Grinding Performance of A New Diamond Abrasive Brick with Ceramic-Metal Binder

GONG Yan-li;DENG Zhao-hui;SUN Zhong-gang;JIAN Zhong-wu;College of Automotive Engineering,Hunan Industry Polytechnic;College of Mechanical and Vehicle Engineering,Hunan University;College of Mechanical and Electrical Engineering,Hunan University of Science and Technology;  
A new kind of diamond abrasive brick with ceramic-metal binder was designed and prepared.The porosity,bulk density and mechanical properties were tested,and comparative tests of grinding SiC reinforced high silicon aluminum alloy composite materials by new diamond abrasive brick with ceramic-metal binder and diamond abrasive brick with ceramic composite binder were carried out under the same conditions.The results show that in abrasive brick with ceramic-metal composite binder,binders have strong holding force on diamond particles.The flexural strength and hardness of the abrasive brick with ceramic-metal binder reached 66.02 MPa and 74.6 HRB.The surface of the SiC reinforced high silicon aluminum alloy composite grinded by diamond abrasive brick with ceramic-metal binder was better than that of grinded by diamond abrasive brick with ceramic binder,and the processing efficiency of the former was higher than the later.When surface roughness of the workpiece was 0.3μm,the material removal rate of abrasive brick with ceramic-metal binder was twice as much as that of abrasive brick with ceramic binder.The problem of SiC reinforced high silicon aluminum alloy composites difficult to machine can be solved.
【Fund】: 湖南省教育厅科学研究青年项目(13B017);; 国家自然科学基金资助项目(51205126 50775069);; 湖南省教育厅科研重点项目(12A048)
【CateGory Index】: TG74
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 Wang Pengfei,Li Zhihong,Zhu Yumei(Key Laboratory of Advanced Ceramics and Machining Technology,Ministry of Education,School of Material Science and Engineering,Tianjin University,Tianjin 300072,China);Effects of Alkali Metal Oxides on the Properties of Vitrified Bond[J];Rare Metal Materials and Engineering;2007-S1
2 ZHANG Zhi-li;XIONG Wei-hao;ZHANG Guo-peng;State Key Lab of Materials Formation and Dies & Moulds Technology,Huazhong University of Science and Technology;;Effects of Sintering Temperature on the Microstructure and Properties of (Ti,W,Mo)C-Ni Cermet[J];Materials for Mechanical Engineering;2013-12
3 LIU Wei-min;AI Xing;ZHAO Jun;ZHOU Yong-hui;Key Laboratory of High-Efficiency and Clean Mechanical Manufacture(Shandong University),Ministry of Education,School of Mechanical Engineering,Shandong University;;Microstructure and Properties of Al_2O_3/TiC/Mo/Ni Micro-nano-ceramic Composite[J];Materials for Mechanical Engineering;2014-03
4 DENG Zhaohui1,2 WU Qiaoping1,2 ZHANG Gaofeng3 ZHANG Bi1,2 WANG Zheneng1,2(1.National Engineering Research Center For High Efficiency Grinding,Hunan University,Changsha 410082; 2.College of Mechanical & Vehicle Engineering,Hunan University,Changsha 410082; 3.College of Mechanical & Engineering,Xiangtan University,Xiangtan 411105);The Cutting Performance and Wear Mechanisms of a New Polycrystalline Diamond Compacts Cutter Tool[J];Journal of Mechanical Engineering;2011-07
5 Han Rongdi(Harbin Institute of Technology,Harbin,China) Wang Dazhen Han Bin;Micro-analysis on Surface of the Aluminum Composite in Ultraprecision Machining[J];China Mechanical Engineering;2003-09
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHAI Haochong,WAN Long,HU Weida,LIU Xiaopan,ZHANG Guowei,WANG Zhiqi(College of Materials Science and Technology,Hunan University,Changsha 410082);Effect of Relative Contents between Li_2O and ZnO on the Performance of Vitrified Bonds and Wheels[J];Materials Review;2011-12
2 WANG Zhiqi,WAN Long,HU Weida,LIU Xiaopan,ZHAI Haochong,WANG Junsha (College of Materials Science and Technology,Hunan University,Changsha 410082);Effect of Nickel on the Properties of Vitrified Bond for Diamond Grinding Tool[J];Materials Review;2012-04
3 GE Ying-fei1,XU Jiu-hua1,YANG Hui2,FU Yu-can1,LUO Song-bao2(1.Nanjing University of Aeronautics & Astronautics,Nanjing 210016,China;2.Beijing Precision Engineering Institute for Aircraft Industry,Beijing 100076,China);Surface Generation in Diamond Turning of SiC_p/Al Metal Matrix Composites[J];Materials for Mechanical Engineering;2007-10
4 TONG Zhen-song;SHEN Zhuo-shen;XING Yi;School of Civil and Environmental Engineering,University of Science and Technology Beijing;Institute for Advanced Materials and Technology,University of Science and Technology Beijing;;Properties of Ti-coated diamond-reinforced glass matrix composites[J];Journal of University of Science and Technology Beijing;2014-07
5 TONG Zhen-song;SHEN Zhuo-shen;XING Yi;School of Civil and Environmental Engineering,University of Science and Technology Beijing;Institute for Advanced Materials and Technology,University of Science and Technology Beijing;;Effect of surface coatings on the properties of diamond / glass composites[J];Journal of University of Science and Technology Beijing;2014-10
6 GAO Jian-hong;LI Wen-hui;LIU Lun-lun;WANG Hai-long;HOU Peng-kun;College of Mechanical Engineering,Taiyuan University of Technology;;Research Progress on New Cutting Tool Materials for Machining Titanium Alloys and Nickel Alloys[J];Materials for Mechanical Engineering;2014-12
7 CHEN Ming-kun;XIONG Wei-hao;FAN Chou;ZHANG Guo-peng;CHEN Liang;State Key Lab of Materials Formation and Dies & Moulds Technology,School of Material Science and Engineering,Huazhong University of Science and Technology;School of Chemistry and Materials Science,South-Central University for Nationalities;;Microstructure and Properties of TiC/Ni_3Al Cermets Prepared by Different Methods[J];Materials for Mechanical Engineering;2014-12
8 Wang Da-zhen(School of M echanical Engineering,Jimei University,Xiamen361021,China);A Study on the Drilling Performance of Super-fine Particle Reinforced Aluminum Matrix Composites[J];Mechanical Engineer;2004-09
9 WANG Da-zhen(School of Mechanical Engineering, Jimei University, Xiamen 361021, China);Study on the Precision Machining Technology of SiC_w/Al Composites[J];Mechanical Engineer;2005-06
10 DENG Zhaohui1,2 WU Qiaoping1,2 ZHANG Gaofeng3 ZHANG Bi1,2 WANG Zheneng1,2(1.National Engineering Research Center For High Efficiency Grinding,Hunan University,Changsha 410082; 2.College of Mechanical & Vehicle Engineering,Hunan University,Changsha 410082; 3.College of Mechanical & Engineering,Xiangtan University,Xiangtan 411105);The Cutting Performance and Wear Mechanisms of a New Polycrystalline Diamond Compacts Cutter Tool[J];Journal of Mechanical Engineering;2011-07
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 WEI Sha-sha 1 , WU Chun-du 2 (1. College of Engineering Technical, Jimei University, Xiamen, Fujian 361021, China; 2. Jiangsu University, Zhenjiang, Jiangsu 212013);Study on TiAlN coated cemented carbide tool[J];Journal of Yanshan University;2005-06
2 WANG Xing-qing, HE Xiao-xiang, GUO Hai-liang (School of Material Science and Engineering, Shanghai University, Shanghai 200072, China);Influence of Mo on microstructure and mechanical properties of TiC-based metallic ceramic[J];Materials Science and Engineering of Powder Metallurgy;2008-05
3 Lin zengdong (Beijing Research Institute of Powder Metallurgy);BlNDED INTERFACE BETWEEN METAL AND DIAMOND AND METALLIZATION OF DIAMOND SURFACE[J];Powder Metallurgy Technology;1989-01
4 QI Hai bo, DING Zhan lai, FAN Yun chang, JIANG Zhi qing (Institute of Materials Science and Engineering, Shijiazhuang Railway Institute, Shijiazhuang 050043,China);RESEARCH ON AUTOMOTIVE BRAKE DISCS OF SiC_P/Al COMPOSITE[J];Acta Materiae Compositae Sinica;2001-01
5 Zhang Jingmin et al;Developing Situation of Natural Diamond Cutting Tool Technology[J];Tool Engineering;2001-04
6 Jiao Feng Zhao Bo Liu Chuanshao et al;Study on Cutting Force in Ultrasonic Vibration Turning of SiC_p/Al Composite with PCD Cutter[J];Tool Engineering;2002-08
7 Wang Shi Zhang Hongtao;Research on Minimum Grinding Allowance of PCD Tools[J];Tool Engineering;2004-04
8 Deng Jianxin Niu Pingzhang Wang Jinghai et al;Development and Application of Soft Coating Tool[J];Tool Engineering;2005-03
9 Wang Yu Hu Jingshu Pen Hongmin et al;Latest Progress in Technology of PCBN Tool[J];Tool Engineering;2006-01
10 Chen Ming et al;Manufacturing Technology and Application of Diamond Film Coated Tools with Complex Geometries[J];Tool Engineering;1998-12
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved