Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2015-09
Add to Favorite Get Latest Update

Effects of Stiffener Parameters on Shear Carrying Capacity of Composite Stiffened Wall Panel

HE Lü-long;SHANG Bo-lin;CHANG Fei;ZHANG Ya-hao;College of Aeronautics and Astronautics,Airforce Engineering University;  
Shearing test was carried on the composite stiffened wall panel widely used in aircraft,and buckling load and damage load of the stiffened wall panel were obtained at differe stiffener spacing and web height.The effects of stiffener spacing and web height on shear carrying capacity of the siffened wall panel were analyzed.Research show that the buckling form of the panel changed from local-buckling to overall-buckling and both the buckling load and damage load decreased with the increase of stiffener spacing.With the increase of web height,buckling load and damage load all increased and finally tended to certain value,the buckling load and damage load were about 425 kN and 775 kN,when the web height was up to 35 mm.
【CateGory Index】: V214.8
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 10 Hits
1 BAIRuixiang,CHENHaoran*,LIUYuandong Dalian 116024, China );Study of buckling and postbuckling behavior of stiffened laminated plates with a delamination damage[J];Journal of Dalian University of Technology;2003-03
2 CHANG Nan,LIU Jiang,ZHAO Mei-ying(College of Aeronautics,Northwestern Polytechnical University,Xi' an,710072,China);Design Optimization for Composite Skin/Stringer Panel[J];Aircraft Design;2007-06
3 CHANG Fei1,YIN Jun-jie1,LI Shu-lin1,ZHANG Yong2,XIE Zi-long1(1.College of Aeronautics and Astronautics Engineering,Airforce Engineering University,Xi'an 710038,China; 2.No.95034 Unit of the PLA,Tianyang 633616,China);Effect of Damage Area on Shear Carrying Capacity of Composite Material Stiffened Wall[J];Materials for Mechanical Engineering;2013-06
4 XIE Zi-long,SHANG Bo-lin,CHANG Fei,YANG Zhe,YIN Jun-jie(College of Aeronautics and Astronautics,Airforce Engineering University,Xi′an 710038,China);Post-bucking Carrying Capacity and Failure Modes of Composite Thin-wall Stiffened Panels with and without Damage[J];Materials for Mechanical Engineering;2013-07
5 SHAO Qing,HE Yu-ting(Engineering college,Air Force Engineering University Xi'an 710038);Study on Shear Stability Performance of Composite Stiffened Panel[J];Aviation Precision Manufacturing Technology;2010-06
6 Zhu Jufen, Yang Haiping (Research Institute of Eng. Mech., Dalian University of Technology, Dalian, 116023) Wang Hai (Research Institute of Shenyang Aircraft Company, Shenyang, 110075);A STUDY OF POST-BUCKLING STRENTH AND FAILURE FOR COMPOSITE STIFFENED PLATES STRUCTURES[J];ACTA AERONAUTICA ET ASTRONAUTICA SINICA;1995-01
7 CHANG Nan1,YANG Wei1,2,ZHAO Mei-ying1(1.School of Aeronautics,Northwest Polytechnic University,Xi'an 710072,China;2.Chengdu Research Institute of Aeroplane design,Chengdu 610041,China);Optimization design on typical reinforced wainscot of composite materials[J];Journal of Machine Design;2007-12
8 YANG Xu 1,3 , SHEN Zhen 2, YAN Ying 3, LIU Bing\|shan 3 (1. Shenyang Aircraft Design Research Institute, P O Box 725, Shenyang\ 110035, Chian) (2. Aircraft Strength Research Institute of China, P O Box 86, Xi′an\ 710065, China) (3. Institute of Aircraft Design and Research, Beijing University of Aeronutics and Astronautics, Beijing\ 100083, China);New Methodology for Evaluating Toughness of Composite Laminates-Investigation of Damage Resistance[J];中国航空学报(英文版);2003-02
9 ZHANG Zhaohui1,3,LIU Jia1,PENG Tao2,GUO Jiaping2, QIU Xueshi2,ZHUANG Zhuo1(1.School of Aerospace,Tsinghua University, Beijing 100084,China; 2.Chengdu Aircraft Design & Research Institute, Chengdu 610041,China; 3.Navy Academy of Armament,Beijing 100161);Simplified method for the stiffness computation of T-shaped integrated composite structure[J];Journal of Tsinghua University(Science and Technology);2011-12
10 Huo Shihui Wang Fusheng Wang Peiyan Yue Zhufeng(School of Mechanics Civil Engineering and Architecture,Northwestern Polytechnical University,710129,Xi'an,China);Stability analysis on the ribbed panel of the composite wing[J];Chinese Journal of Applied Mechanics;2010-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 DONG Yong-peng,WANG Pei-yan,LIU Yang,WANG Fu-sheng,YUE Zhu-feng(Department of Engineering Mechanics,Northwestern Polytechnical University,Xi'an 710129,China);Optimization Analysis of the Composite Stiffeners Based on Beam Elements[J];Journal of Materials Science and Engineering;2010-06
2 WANG Man~(1,2),CHEN Hao-ran~(*1),BAI Rui-xiang~1 (1.State Key Lab.of Struct.Anal.for Ind.Equip.,Dalian Univ.of Technol.,Dalian 116024,China;2.School of Mech.Eng.and Autom.,Dalian Inst.of Light Ind.,Dalian 116034,China);Contact effect on dynamic response of stiffened laminates with a delamination[J];Journal of Dalian University of Technology;2005-05
3 WANG Man1,2,BAI Rui-xiang 1,CHEN Hao-ran1(1.State Key Laboratory of Structural Analysis for Industrial Equipment,Department of Engineering Mechanics,Faculty of Vehicle Engineering and Mechanics,Dalian University of Technology,Dalian 116024,P.R.China;2.School of Mechanical Engineering & Automation,Dalian Polytechnic University,Dalian,116034,P.R.China);Analysis of Transfer Functions for Damaged Stiffened Laminates[J];Journal of Chongqing University;2008-03
4 BAI Ruixiang~1, CHEN Haoran~(1,*), WANG Man~2 University of Technology, Dalian 116024,China; 2. Dalian Institute of Light Industry, Dalian 116034, China);DYNAMIC LOADING CAPACITY OF STIFFENED DELAMINATED PLATES[J];Acta Materiae Compositae Sinica;2005-01
5 BAI Ruixiang~(1,*), WANG Man~2, CHEN Haoran~1(1.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology,Dalian 116024,China;2.School of Mechanial Engineering & Automation,Dalian Institute of Light Industry, Dalian 116034, China);BUCKLING BEHAVIOR OF COMPOSITE AGS WITH DELAMINATION[J];Acta Materiae Compositae Sinica;2005-04
6 BAI Ruixiang ~(*1),WANG Man~(2),CHEN Haoran ~(1) ~()(1.State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian 116024,China; 2.School of Mechanical Engineering & Automation,Dalian Institute of Light Industry,Dalian116034,China);Postbuckling behavior of damaged advanced grid stiffened structure after impact[J];Acta Materiae Compositae Sinica;2006-03
7 BAI Rui-xiang1 , CHEN Hao-ran1 , WANG Man2 (1.State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China; 2. Dalian Institute of Light Industry, Dalian 116034, China);THE EFFECT OF MATRIX DAMAGE ON DYNAMIC CHARACTERISTICS OF COMPOSITE STIFFENED DELAMINATED PLATES[J];Engineering Mechanics;2006-03
8 SHI Ye-jin1,BAI Rui-xiang2,WANG Xiao-ping2,CHEN Bao-xing1(1.Stress Department,Commercial Aircraft Corporation of China Ltd Shanghai Aircraft Design and Research Institute,Shanghai 200232,China;2.State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian 116024,China);EXPERIMENT AND LOAD-CARRYING CAPABILITY PREDICTION FOR J SHAPE STIFFENED COMPOSITE PLATE UNDER COMPRESSION[J];Engineering Mechanics;2013-02
9 XIE Zi-long,SHANG Bo-lin,CHANG Fei,YANG Zhe,YIN Jun-jie(College of Aeronautics and Astronautics,Airforce Engineering University,Xi′an 710038,China);Post-bucking Carrying Capacity and Failure Modes of Composite Thin-wall Stiffened Panels with and without Damage[J];Materials for Mechanical Engineering;2013-07
10 FENG Yu,HE Yu-ting,SHAO Qing,DING Hua,JIAO Sheng-bo,WANG Xiao-guang(School of Aeronautics and Astronautics Engineering,Air Force Engineering University,Xi′an 710038,China);Shear Buckling Characteristics of Aviation Fiber-reinforced Resin Matrix Composite[J];Materials for Mechanical Engineering;2013-07
China Proceedings of conference Full-text Database 2 Hits
1 Wang Man., BAI Rui-xiang, Li Ze-cheng, Chen Hao-ran. (State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024 China; (Dalian Institute of Light Industry, Dalian, 116034, China);NONLINEAR BUCKLING ANALYSIS OF DAMAGED ADVANCED GRID STIFFENED STRUCTURE WITH MULTIPAL DAMAGES[A];[C];2005
2 LI Shan-Shan;WEI Yu-Long;CHEN Xian-Min;Aircraft Strength Research Institute;;SHEAR STABILITY TEST AND ANALYSIS ON BEAM WEB OF AIRCRAFT WING BOX[A];[C];2014
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Yin~(1,2),Stanley O.Oghumu~2,C.S.Cai~2(1.School of Civil Engineering & Mechanics,Huazhong University of Science & Technology,Wuhan 430070,China;2.Department of Civil & Environmental Engineering,Louisiana State University,Baton Rouge,Louisiana 70803,U S A);Equivalent finite element model of FRP honeycomb-type sinusoidal core panels[J];Journal of Railway Science and Engineering;2006-02
2 BAIRuixiang,CHENHaoran*,LIUYuandong Dalian 116024, China );Study of buckling and postbuckling behavior of stiffened laminated plates with a delamination damage[J];Journal of Dalian University of Technology;2003-03
3 TANGWen-yan~*,GUYuan-xian,ZHAOGuo-zhong Dalian 116024, China );Stacking-sequence optimization of composite laminate plates by genetic algorithm[J];Journal of Dalian University of Technology;2004-02
4 Zhang Yifen, Wen Xuanling, Chen Haoran ( Res. Inst. of Eng. Mechanics, Dalian Univ. of Technol., China );Nonlinear thermoelastic analysis for composite laminate with delamination damage[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1997-05
5 Sun Xiannian, Chen Haoran ( Dept. of Eng. Mechanics, Dalian Univ. of Technol., China );Study of energy release rate of composite laminate with symmetric edge delaminations considering geometric nonlinearity[J];JOURNAL OF DALIAN UNIVERSITY OF TECHNOLOGY;1998-03
6 Piao Chunyu,Zhang Yining (Shenyang Aircraft Design & Research Institute,Shenyang 110035,China);Optimal Design of Typical Stiffened Panels[J];Aircraft Design;2003-04
7 SHEN Tie-jun~1,TONG Qiang~1,MA Wei~2,LI Ge-lan~2 (1.Harbin Aircraft Industries(Group)Co.Ltd,Aeronautic Product Develop Department Design & Test Office,Harbin 150066,China)(2.Shenyang Aircraft Design & Research Institute,Shenyang 110035,China);An Experimental Investigation of Post-Buckling Durability and Damage Tolerance of Composite Stiffened Panels[J];Aircraft Design;2006-02
8 BAI Ruixiang ~(*1),WANG Man~(2),CHEN Haoran ~(1) ~()(1.State Key Laboratory of Structural Analysis for Industrial Equipment,Dalian University of Technology,Dalian 116024,China; 2.School of Mechanical Engineering & Automation,Dalian Institute of Light Industry,Dalian116034,China);Postbuckling behavior of damaged advanced grid stiffened structure after impact[J];Acta Materiae Compositae Sinica;2006-03
9 WU Decai,XU Yuanming*,WAN Qing(School of Aeronautic Science and Engineering Technology,Beijing University of Aeronautics and Astronautics,Beijing100083,China);Global buckling load analysis of grid stiffened composite panels[J];Acta Materiae Compositae Sinica;2007-02
10 LI Jun1,YAO Xuefeng1,LIU Yinghua1,CEN Zhangzhi1,KOU Zhejun2,DAI Di2(1.Department of Engineering Mechanics,Tsinghua University,Beijing 100084,China: 2.Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China);Simulation on curing warpage deformation of composite T-shaped integrated structure[J];Acta Materiae Compositae Sinica;2009-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved