Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Materials for Mechanical Engineering》 2015-09
Add to Favorite Get Latest Update

Effect of Backing Plate Hole Diameter on Residual Stress Distribution around 7A04-T6 Aluminum Alloy Hole after Cold Expansion

ZHANG Fei;HE Yu-ting;ZHANG Teng;SHAO Qing;LI Pei-yuan;Aeronautics and Astronautics Engineering College,Air Force Engineering University;  
A split sleeve cold-expansion model of 7A04-T6 aluminum alloy plate with hole was carried out with a finite element software,the split sleeve cold-expansion process was simulated,the hoop residual stress distribution around the hole after cold expansion was predicted,and the prediction results was compared with the measured results.The hoop residual stress distribution around the hole after cold expansion at different backing plate hole diameters was discussed finally.The results show that the simulated residual stresses around the hole was accordance with the measured results.The residual compressive stress in the entrance layer of the plate exhibited an increase trend with the increase of the backing plate hole diameter.When the backing plate hole diameter was smaller than 11.74 mm,lug boss was formed in the exit layer,which lead the residual compressive stress changed sharply,and the residual compressive stress peak in the exit layer located in the backing plate hole edge.The hoop residual stress tended to change more smoothly with the increase of the backing plate hole diameter,and the lug boss vanished gradually.
【Fund】: 国家自然科学基金资助项目(51475470)
【CateGory Index】: V261
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 3 Hits
1 WANG Xue-de1,YANG Lei2,ZHOU Xin1,TONG Chong-lou3,CHU Feng4(1.Aero-Plasma Dynamics Lab,Air Force Engineering University,Xi′an 710038,China;2.No.87 Gruppe of 94243 Military Unit,Zhucheng 262200,China;3.Mechanical Engineering Department,Xijing College,Xi′an 710123,China;4.Graduate Company 11 Engineering College Air Force Engineering University,Xi′an 710038,China);Residual Stress and Microstructure of Laser Shock Peened Layer of Titanium Alloy[J];Materials for Mechanical Engineering;2012-04
2 DAI Ru-yong1,YU Zhong-qi1,LIU Zhong-wei3,TANG Liang3,ZHAN Ke2,JIANG Chuan-hai2(1.School of Mechanical Engineering;2.School of Materials Science and Engineering,Shanghai Jiaotong University, Shanghai 200240,China;3.CSR Qishuyan Institute Co.,Ltd.,Changzhou 213011,China);Shot Peening Treatment and Characterization of 18CrNiMo7-6 Steel after Carburizing and Quenching[J];Materials for Mechanical Engineering;2013-05
3 WANG Hong-daa,SU Hong-huab(a.College of Material Science & Engineering;b.College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Finite Element Simulation of Split-sleeve Cold Expansion Process in TC4 Titanium Alloy[J];Machine Building & Automation;2010-03
Chinese Journal Full-text Database 10 Hits
1 WANG Xiang ming LIU Wen ting WANG Zhong bo(Beijing University of Aeronautics and Astronautics, Dept. of Flight Vehicle Design and Applied Mechanics);Equivalent K_t Method for Evaluating Fatigue Properties of Titanium Alloy Welding Specimens[J];Journal of Beijing University of Aeronautics and Astronautics;2002-01
2 Yang Jiyun Zhang Xing (Dept. of Flight Vehicle Design and Applied Mechanics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China) Zhang Min (31st Research Institute, China Aerospace Science and Industry Corporation, Beijing 100074, China);Research on relation between crack extension resistance curve and sample thickness[J];Journal of Beijing University of Aeronautics and Astronautics;2003-07
3 MA Hong-yi,LI Xiao-gang,LI Hong-yun(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Tension and Fatigue Properties of Glass Fiber Reinforced Aluminum Laminates[J];Journal of Materials Engineering;2006-07
4 HU Ben-run,LIU Jian-zhong,CHEN Jian-feng(Beijing Institute of Aeronautical Materials,Beijing 100095,China);Relationship Between Fatigue Notch Factor K_f and Stress Concentration Factor K_t[J];Journal of Materials Engineering;2007-07
5 ZHANG Ji-kui,CHENG Xiao-quan,LI Zheng-neng(School of Aeronautic Science and Engineering,Beihang University,Beijing 100191,China);Synthetic Characterization and Evaluation of Mechanical Properties for Airframe Metal Based on Damage Tolerance Design[J];Journal of Materials Engineering;2010-07
6 LIANG Bin1,SHEN Hai-jun2,MENG Hua2(1.Southwest China Institute of Electronic Technology,Chengdu 610036,China;2.School of Aeronautics & Mechanics,Tongji University,Shanghai 200092,China);Aerodynamic Analysis of an Airborne Equipment Pod[J];Telecommunication Engineering;2012-05
7 Tian Xiuyun,Sheng Houbin (CAUC of China ,Tianjin 300300,China);Research on the Influence of Use of Different-Stiffness Fasteners on Structure Fatigue Life in Structure Repair[J];Aircraft Design;2004-01
8 SHEN Hai jun 1, GUO Wan lin 1, LU Guo zhi 2 (1. Nanjing University of Aeronautics & Astronautics, Nanjing 210016, China; 2. Aircraft Department of Northwestern Polytechnic University, Xian 710072, China);STRESS CORROSION CRACKING SUSCEPTIBILITY OF ALUMINUM ALLOY LC9 IN NaCl SOLUTION[J];Corrosion & Protection;2002-05
9 GUO Lan zhong 1, XING Wen zhen 2, YU Hua li 1 (1. Lanzhou Polytechnical College, Lanzhou 730050, China; 2. Northwestern Polytechnical University, Xi’an 710072, China);Prestressing of force fit and its characteristics under tension load[J];JOURNAL OF GANSU UNIVERSITY OF TECHNOLOGY;2000-01
10 PAN Li-hua,YANG Rui-cheng (Collage of Materials Science and Engineering,Lanzhou Univ. of Tech.,Lanzhou 730050,China);Predication of fatigue life of structure with random scan vibration[J];Journal of Lanzhou University of Technology;2007-02
China Proceedings of conference Full-text Database 4 Hits
1 Yang FengPeng Qiu YiPing Lin ZhuoYing (Department of Engineering Mechanics,ShangHai Jiaotong University,Shanghai,200240,China);Study on DFR Value of Docking Area of the Joint Panel In an Aircraft[A];[C];2008
2 Hu Benrun Liu Jianzhong (Institute of Aeronautical Materials,Beijing China);Relationship Between High-Cycle Fatigue Limits and Static Properties of Sheet and Hand Forging Aluminium[A];[C];2008
3 Wang Lei Wang Zhi Chen Zhiwei Xue Jun (Beijing Aeronautical Technology Research Center B,Beijing);A engineering Method for Aircraft Structure Corrosion Fatigue Curve Determination[A];[C];2008
4 LI Chenglin~*,WANG Desheng,YE Jianfeng,ZHANG Xinxi,FENG Lijun AVIC Shenyang Aircraft Corporation,Liaoning Shenyang 110850,China;NC Machining Technology Used on Aviation Thin Wall Frame[A];[C];2012
【Secondary Citations】
Chinese Journal Full-text Database 7 Hits
1 Wang Xiulan,Liu Guanghui;Trail-Manufacturing of Steel 18CrNiMo7-6 Used for Gear of High speed/ Heavy Load Rail Way Electric Locomotive[J];Heavy Castings and Forgings;2009-03
2 LIU Dao xin 1, HE Jia wen 2 (1. Corrosion & Protection Research Lab., Northwestern Polytechnical University, Xi′an\ 710072, China) (2. Xi′an Jiaotong University, Xi′an\ 710049, China);REVIEW OF FACTORS THAT INFLUENCE FRETTING FATIGUE (FF) AND INVESTIGATION ON FF BEHAVIOR OF Ti-ALLOY[J];Acta Aeronautica Et Astronautica Sinica;2001-05
3 Li Wei He Weifeng Li Yinghong Wang Cheng Yang Zhuojun(The Engineering Institute, Air Force Engineering University, Xi'an, Shaanxi 710038, China);Effects of Laser Shock Processing on Vibration Fatigue Properties of K417 Material[J];Chinese Journal of Lasers;2009-08
4 CHU Dong-ning 1 ,ZHANG Xian-guo 1 ,ZHENG Li-xin 1 ,WANG Bo-lan 2 ,HU Jing 2 (1.Material and Technology Institute of Dongfeng Motor Corporation,Ltd.,Shiyan Hubei442001,China;2.Shiyan Plant ,Dongfeng Axle Co.,Ltd.,Shiyan Hubei442000,China);Technology and Equipment of Peen Shot Strengthen for Drive Gear of Rear Axle in Heavy Duty Vehicle[J];Automobile Technology & Material;2004-07
5 Wang Jian, Zou Shikun, Tan Yongsheng (Beijing Aeronautical Manufacturing Technology Research Institute, Beijing, 100024 );Application of laser shock processing on turbine engines[J];Applied Laser;2005-01
6 Luan Weiling Tu ShandongEast China University of Science & Technology, Shanghai, 200237;Recent Trends on Surface Modification Technology of Shot Peening[J];China Mechanical Engineering;2005-15
7 Fu Yanyan,Song Yueqing~*,Hui Songxiao,Mi Xujun(State Key Laboratory for Fabrication &(Processing) of Non-Ferrous Metals,General Research Institute for Non-Ferrous Metals,Beijing 100088,China);Research and Application of Typical Aerospace Titanium Alloys[J];Chinese Journal of Rare Metals;2006-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved