Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Harbin Institute of Technology》 2011-10
Add to Favorite Get Latest Update

Mechanical characters of concrete rib deviator

YANG Ming1,2,HUANG Qiao1,2,RONG Xue-liang2(1.School of Transportation,Southeast University,210096 Nanjing,China; 2.School of Transportation Science and Engineering,Harbin Institute of Technology,150090 Harbin,China)  
According to the mechanical and structural characters of externally prestressed box girder with corrugated webs,the mechanical performance,such as load bearing mechanism,mechanical characters,damage form and ultimate load capacity of concrete rib deviator used in externally prestressed box girder with corrugated webs is studied using FEA(Finite Element Analysis) and experimental methods.The experimental and FEA results fit each other well.The research indicates that the local influence in concrete flange caused by deviator concentrates in the joints of deviator and concrete flange and the nearby location.When the deviator damages,the tensional concrete cracks and the round reinforcements yield and compressional concrete splits.The compressional concrete shows obvious characteristics of eccentric compression member.The conclusion of this paper may be helpful for designers in designing deviators of externally prestressed box girder with corrugated webs.
【Fund】: 国家自然科学基金资助项目(51078078);; 交通部西部科技项目(200538181215)
【CateGory Index】: U448.213
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 1 Hits
1 YANG Ming,SUN Yun,ZHANG Shu-ren,HUANG Qiao(School of Transport Science and Engineering,Harbin Institute of Technology,Heilongjiang Harbin 150090,China);Development and Prospect of Externally Prestressed Box Beams with Corrugated Steel Webs[J];Journal of Highway and Transportation Research and Development;2006-12
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HU Dong-qing (Huaibei Vocational Technical College,Huaibei,Anhui 235000);Three Dimensional Finite Element Analysis of Engine Connecting Rod[J];Journal of Anhui Agricultural Sciences;2009-14
2 PENG You-yu,LIU Guang-zheng,GUO Xiao-yan(China North Vehicle Research Institute,Beijing 100072,China);the FEA of Primary Parts of Short-long Arm Suspension[J];Vehicle & Power Technology;2009-03
3 HAN Ming,NING Ke-yan,WANG Jiang-bing (Science and Technology on Vehicle Transmission laboratory,China North Vehicle Research Institute,Beijing 100072,China);Finite Element Analysis of Friction-disc Riveting[J];Vehicle & Power Technology;2011-01
4 Wang Xingguo1 Wu Lizhi2 Xiao Yunfeng2(1.Beijing University of Chemical Technology,Beijing 100029;2.Department of Mechanical Engineering,Beijing Institute of Petro-chemical Technology,Beijing 102617);Mechanical Deformation Analysis of Diaphragm Compressor Metal Diaphragm[J];Journal of Beijing Institute of Petro-Chemical Technology;2008-01
5 GONG Yan-xia,SHEN Xiao-hong,NIE Xue-jun(College of Mechanical Engineering,Beijing Technology and Business University, Beijing 100048,China);BUMPER CRASH SIMULATION STUDY AT LOW SPEED ON ABAQUS[J];Journal of Beijing Technology and Business University(Natural Science Edition);2009-03
6 LI Zhi-yuan1,LIN Shi-zhu1,ZHU Xi-xia2(1.Architecture and Civil Engineering School,Inner Mongolia University of Science and Technology,Baotou 014010,China;2.Shandong Yiyuan Yuantain Housing Go.,Ltd.,Yiyuan 256100,China);The thickness of fire-protection layer of one plane steel frame[J];Journal of Inner Mongolia University of Science and Technology;2009-03
7 DING Hong-yan1,2,LE Cong-huan1,ZHANG Pu-yang 1,2(1 School of Civil Engineering,Tianjin University,Tianjin 300072,China;2 Tianjin Key Laboratory of Civil Engineering Structure and New Materials,Tianjin 300072,China);Structural behavior analysis of the pipe-in-pipe riser subjected to vessel impact[J];Journal of Ship Mechanics;2010-08
8 SANG Nan,etc.(Changzhou Institute of Technology,Changzhou 213002,China);Lightweight design for front-swing arm of an automobile base on ABAQUS[J];Journal of Changchun Institute of Technology(Natural Sciences Edition);2010-02
9 DU Feng-shan1,2,WANG Dan-chao2,YAN Liang2,DAI Sheng-long1,YANG Shou-jie1(1 Beijing Institute of Aeronautical Materials,Beijing 100095,China;2 School of Mechanical Engineering,Yanshan University,Qinhuangdao 066004,Hebei,China);Fatigue Life Analysis of Aluminum Alloy 2E12 Plates with Center Holes[J];Journal of Materials Engineering;2009-07
10 XUE He1,ZHAO Dan1,PENG Qun-jia2,TANG Wei1,FANG Xiu-rong1,GONG Xiao-yan1(1 School of Mechanical Engineering,Xi'an University of Science and Technology,Xi'an 710054,China;2 Fracture and Reliability Research Institute,Tohoku University,Sendai 980-8579,Japan);Effects of Material Plasticity of Nickel Base Alloy on Stress-strain Field at Tip of Stress Corrosion Cracking[J];Journal of Materials Engineering;2011-05
China Proceedings of conference Full-text Database 10 Hits
1 Fang Jiazhi, Liu Guangzheng China North Vehicle Research Institute,Beijing,100072;Study on Nonlinear Analysis of FEA of Safety of Coal Mill[A];[C];2008
2 ;基于数值模拟的车门抗凹性分析[A];[C];2009
3 LIU Sheng-feng,ZHANG Yan-xia,ZHOU Dong (Institute of Civil Engineering,Chongqing Jiaotong University,Chongqing 400074,China);Two algorithms based on a cyclic polycrystal model[A];[C];2009
4 Jin Shi,Yang Hezhou,Su Xiurong Zhengzhou Nissan Automobile Co.,Ltd.450016;The Design and CAE Analysis of Hood and Hood-intake System for Y43[A];[C];2010
5 Li Zhipeng,Wang Suyan (School of Civil and Hydraulic Engineering,State Key Laboratory of Coastal and Offshore Engineering,Dalian University of Technology,Dalian 116024);NONLINEAR NUMERICAL SIMULATION OF BONDING PERFORMANCE BETWEEN GFRP AND HIGH-STRENGTH CONCRETE[A];[C];2009
6 Yuetong Xia, Wensheng Lu, Long Jiang* Institute of Chemistry, Chinese Academy of Sciences, 100190, Beijing;Gold-decorated polystyrene grows into biosensor by new multi-amine surfactant[A];[C];2010
7 Tao Yu, Ji-jun Wei, Guang-miao Qu, Wei Ding College of Chemistry and Chemical Engineering, Daqing Petroleum Institute, 163318, Daqing;Synthesis and surface properties of series of sulfopropyl betaines[A];[C];2010
8 Guang-miao Qu, Tao Yu, Ji-jun Wei, Wei Ding College of Chemistry and Chemical Engineering, Daqing Petroleum Institute, 163318, Daqing;Synthesis and surface properties of series of sulfobutyl betaines[A];[C];2010
9 Wenjie Sun, Yuwen Shen, Jingcheng Hao* Key Laboratory of Colloid and Interface Chemistry, Ministry of Education, Shandong University, 250100, Jinan;Phase Behaviors and Rheological Properties of Cat-anionic Surfactant System TTAOH/DA/H_2OInduced by Hydrophilic and Hydrophobic Salts[A];[C];2010
10 Guo-Liang Li, Ying Zhang, Xiang-Li Ning, Zan Jiang Key Laboratory of Applied Surface and Colloid Chemistry (MOE); School of Chemistry and Materials Science, Shaanxi Normal University, 710062, Xi’an;Preparation of Multi-layer Core-shell W/SiO_2/UF Composite Materials[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 XU Jun-lan,GU An-bang (School of Civil Engineering & Architecture, Chongqing Jiaotong University, Chongqing 400074, China);Analysis on structure and force principle of composite box-grider bridge with corrugated steel webs[J];Journal of Chongqing Jiaotong University;2005-02
2 HU Xu-hui,GU An-bang,XU Jun-lan (Chongqing Jiaotong University,Chongqing 400074,China);Influence of webs inclination on mechanical behaviors of box girder with corrugated steel webs[J];Journal of Chongqing Jiaotong University;2006-01
3 ZHONG Hao,XU Jun-lan,GU An-bang,HU Xu-hui(Chongqing Jiaotong University,Chongqing 400074,China);Analysis of shear connector of box girder with corrugated steel webs[J];Journal of Chongqing Jiaotong University;2006-03
4 HU Jian-hua1,HOU Wen-qi2,YE Mei-xin2(1.Hunan Provincial Communications Planning,Survey & Design Institute,Changsha 410011,China;2.School of Civil and Architectural Engineering,Central South University,Changsha 410075,China);Study of influence factors and formula for the bearing capacity of PBL shear connectors[J];Journal of Railway Science and Engineering;2007-06
5 ;Extracorporeal Prestressed Concrete Composite Bridge with Corrugated Steel Web[J];Northeastern Highway;2002-01
6 ZONG Zhou-hong 1 ,CHE Hui-min 2 ( 1.College of Civil Engineering and Architectures ,Fuzhou University,Fjian Fuzhou 350002, China; 2.College of Civil Engineering, Southwest Jiaotong University,Sichuan Chengdu 610031; China);Experimental Study of Shear Connector under Static and Fatigue Loading[J];JOURNAL OF FUZHOU UNIVERSITY(NATURAL SCIENCES EDTION);1999-06
7 Hu Jianhua Pu Huairen (Hunan Provincial Communications Planning,Survey & Design Institute Changsha 410008);DESIGN AND TEST OF THE JOINT PART OF STEEL-CONCRETE GIRDER BRIDGE WITH PBL SHEAR CONNECTOR[J];Steel Construction;2007-02
8 CHEN Bao-chun,HUANG Qing-wei (College of Civil Engineering and Architecture, Fuzhou University, Fuzhou 350002,China);A Summary of Application of Prestressed Concrete Box-Girder Bridges with Corrugated Steel Webs[J];Highway;2005-07
9 WAN Shui,LI Hongjiang,CHEN Jianbing (Transportation College,Southeast University,Jiangsu Nanjing 210096,China);Experimental Study and Design of Prestressed Concrete Boxgirder with Corrugated Steel Web[J];Journal of Highway and Transportation Research and Development;2004-07
10 SONG Jian-yong~(1,2),REN Hong-wei~2,NIE Jian-guo~1(1.Tsinghua University,Beijing 100084,China;2.Research Institute of Highway of Ministry of Communications,Beijing 100088,China);Nonlinear Shear Buckling Analysis of Corrugated Steel Webs[J];Journal of Highway and Transportation Research and Development;2005-11
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved