Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of South China University of Technology(Natural Science Edition)》 2008-04
Add to Favorite Get Latest Update

Surface Formation of Copper Fibers Fabricated by Multi-Edge Tool

Zhou Wei Tang Yong Wan Zhen-ping Lu Long-sheng Pan Min-qiang(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China)  
In this paper,long copper fibers with different surficial roughness were fabricated on a common horizontal lathe with multi-edge tool,and were then compared with those fabricated by the drawing method.Coarse antlers were found on the surface of the copper fibers fabricated with multi-edge tool by means of SEM photographs.More-over,some cutting experiments were performed to reveal the influence of cutting parameters on the surface structures of copper fibers.The results indicate that,as compared with the back engagement and the feed rate,the cutting speed influences the surface structure of copper fibers most greatly.It is thus concluded that low cutting speed as well as suitable back engagement and feed rate accordant to the equal diameter helps to obtain long copper fibers with coarse antlers.
【Fund】: 国家自然科学资金重点资助项目(50436010);; 国家自然科学资金资助项目(50675070);; 广州市科技攻关重点资助项目(2005Z2-D0011)
【CateGory Index】: TG51;TH161.14
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 ZHOU Wei,TANG Yong,PAN Minqiang,XIANG Jianhua,WAN Zhenping(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640);Research Progress of Manufacturing Technology and Application of Porous Metal Fiber Sintered Sheet[J];Materials Review;2010-01
2 Zhou Wei Tang Yong Wei Xiao-ling Pan Min-qiang Wan Zhen-ping (School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China);Formation of Fine Metal Fiber by Planing[J];Journal of South China University of Technology(Natural Science Edition);2009-11
3 Tao Su-lian1,2 Tang Yong1(1.School of Mechanical and Automotive Engineering∥Key Laboratory of Surface Functional Structure Manufacturing of Guangdong Higher Education Institutes,South China University of Technology,Guangzhou 510640,Guangdong,China;2.Department of Mechanical Engineering,Guangdong Technical College of Water Resources and Electric Engineering,Guangzhou 510635,Guangdong,China);Forming Technology of Composite Capillary Wick Structure for Heat Column and Its Optimization[J];Journal of South China University of Technology(Natural Science Edition);2011-06
4 HE Zhan-shu1, WANG Jun2, TANG Yong1, WAN Zhen-ping1, WEI Xiao-ling1 (1. School of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510640, China; 2. Department of Mechanical and Electrical Engineering, Guangdong Industry Technical College, Guangzhou 510300, China);Oblique cutting aluminium fiber with multi-tooth tool[J];The Chinese Journal of Nonferrous Metals;2009-06
【Citations】
Chinese Journal Full-text Database 8 Hits
1 Tan Songting Zhang Mingqiu Rong Minzhi Zeng Hanmin Li Baoen (Materials Science Institute, Zhongshan University, Laboratory of Polymer Composite and Functional Materials, State Educational Commission of China);Study on Properties of Metal Fibre Filled Polymer Composites[J];JOURNAL OF MATERIALS ENGINEERING;1998-12
2 Xi Zhengping;Zhou Lian;Li Jian;Liao Jichang; Wu Lujian;Li Yalu;Li Jianping;Zhang Yanrong (Northwest Institute for Nonferrous Metal Research, Xi'an 710016);Current Status of Development and Application of Metal Fibres[J];RARE METAL MATERIALS AND ENGINEERING;1998-06
3 Liu Wangyu Ming Donglan Zeng Zhixin et al;Strength Analysis of Long Metal Fibers Manufactured by Using Micro-saw & Chip-pulling Combined Cutting Method[J];Tool Engineering;2002-03
4 Chen Ze_fei Zeng Zhi_xin Tang Yong Li Yong (Dept. of Mechatronic Eng. , South China Univ. of Tech. ,Guangzhou 510640,China);New-Type Cutting Tool Used for Manufacturing Long Metal Fiber[J];Journal of South China University of Technology(Natural Science);2001-06
5 WAN Zhen-ping, YE Bang-yan, TANG Yong, ZHANG Fa-ying (Institute of Mechanical Engineering, South China University of Technology, Guangzhou 510640);On Cutting Mechanism of a Multi-Tooth Tool and Its Application in Manufacturing Metal Fibre[J];Mechanical Science and Technology;2003-06
6 Wan Zhenping Liu Yajun Tang Yong Ye Bangyan(College of Mechanical Engineering, South ChinaUniversity of Technology, Guangzhou 510640);CUTTING MODEL OF MULTI-TOOTHTOOL AND ITS CHIP-SPLITTINGMECHANISM[J];Chinese Journal of Mechanical Engineering;2005-03
7 ;自旋转车刀加工金属纤维时切削参数对纤维力学性能的影响[J];Machinery;2003-01
8 Li Jiazhong(45);Machining of Fibriform Metals[J];MANUFACTURING TECHNOLOGY & MACHINE TOOL;1994-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Fang Kun1, Bai Shulin2, Gao Xiaowei1, Guo Zhishan1(1.Beijing NST Advanced Materials Co. Ltd., Beijing 100085, China; 2.College of Engineering, Peking University, 100871 Beijing, China);STUDY ON PREPARATION AND PROPERTIES OF STAINLESS-STEEL-FIBER FILLED ABS[J];Engineering Plastics Application;2007-03
2 ;Study the Shielding Effectiveness of Stainless-Steel-Fiber/PP Conductive Plastics[J];Safety & EMC;2006-01
3 ;Characteristic and Applications of Thermoplastic Conductive Elastomers in EMI/RFI[J];Safety & EMC;2007-01
4 HE Yiyan DU Shiguo JIANG Zhibo (Department 3 of Ordnance Engineering College,Shijiazhuang 050003);Advances in Electromagnetic Shielding Conductive Plastics[J];Materials Review;2003-02
5 ZHOU Wei,TANG Yong,PAN Minqiang,XIANG Jianhua,WAN Zhenping(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640);Research Progress of Manufacturing Technology and Application of Porous Metal Fiber Sintered Sheet[J];Materials Review;2010-01
6 TAN Song ting 1,3 ,ZHANG Ming qiu 1,2 ,RONG Min zhi 1,2 ,ZENG Han min 1,2 (1 Laboratory of Polymer Composites and Functional Materials, the Ministry of Education of China, Zhongshan University, Guangzhou 510275, China) (2 Materi;Electroconductivity and Electromagnetic Interference Shielding Effectiveness of Metal Fiber Filled Polymer Composites[J];JOURNAL OF MATERIALS ENGINEERING;1999-12
7 ZENG Wei, TAN Song-ting(College of Chemistry, Xiangtan University, Xiangtan 411105,China);Properties of the Nickel-coated PET Fiber Filled the Epoxy Resin Composite[J];Journal of Materials Engineering;2004-07
8 Xi Zhengping; Zhang Jian; Wu Lujian; Li Jian; Zhu Rui;Yang Yanan; Feng Ping; Zuo Caixia; Shi Dan(Northwest Institute for Nonferrous Metal Research, Xi'an 710016);New Type of Anode Material for the MH-Ni Battery[J];RARE METAL MATERIALS AND ENGINEERING;1999-06
9 Xi Zhengping, Zhang Jian, Wu Lujian, Wang Xin, Zhou Lian (Northwest Institute for Nonferrous Metal Research, Xi’an 710016);Research on Some Properties of Austenitic Stainless Steel Fibres[J];Rare Metal Materials and Engineering;2000-06
10 Yang Zhaoling, Li Jianping, Xi Zhengping, Li Yalu, Wang Xin, Yang Yanan, Shi Dan (Northwest Institute for Nonferrous Metal Research, Xi′an 710016, P R China);The Effects of Strain and Chemical Composition on Some Important Properties of 316L Stainless Steel Fibre[J];Rare Metal Materials and Engineering;2001-06
China Proceedings of conference Full-text Database 3 Hits
1 XU Pei-min,YANG Yan-an,ZUO Cai-xia,ZHANG Guo-peng, GAO Xiao-jun,FU Wu,WANG Juan,DUAN Bo-yi (Xi'an Filter Metal Materials Co.,Ltd,Xi' an 710016,China );Status of porous metal materials permeability[A];[C];2010
2 HUAN Chunhua,YANG Biao,WEN Bianying (Department of Material Science and Engineering,Beijing Technology and Business University,Beijing 100048,China);Application of Stokes Rule in Preparation of Polymeric Gradient Composites[A];[C];2010
3 Wenfeng BAI,Yan'an YANG,Jianping LI,Peimin XU,Guopeng ZHANG Xi'an Filter Metal Materials Co.,Ltd,Xi'an,China,710016;The Effects of Annealing Process on Stainless Steel Fiber Property[A];[C];2011
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 SI Guang shu,JIANG Pei x ue,LI Meng;Resarch on the Flow and Con vection Heat Transfer of Mono Phase Fluids in Porous Media[J];Journal of Chengde Petroleum College;2000-04
2 TAN Song ting 1,3 ,ZHANG Ming qiu 1,2 ,RONG Min zhi 1,2 ,ZENG Han min 1,2 (1 Laboratory of Polymer Composites and Functional Materials, the Ministry of Education of China, Zhongshan University, Guangzhou 510275, China) (2 Materi;Electroconductivity and Electromagnetic Interference Shielding Effectiveness of Metal Fiber Filled Polymer Composites[J];JOURNAL OF MATERIALS ENGINEERING;1999-12
3 Tan Songting Zhang Mingqiu Rong Minzhi Zeng Hanmin Li Baoen (Materials Science Institute, Zhongshan University, Laboratory of Polymer Composite and Functional Materials, State Educational Commission of China);Study on Properties of Metal Fibre Filled Polymer Composites[J];JOURNAL OF MATERIALS ENGINEERING;1998-12
4 Xi Zhengping;Zhou Lian;Li Jian;Liao Jichang; Wu Lujian;Li Yalu;Li Jianping;Zhang Yanrong (Northwest Institute for Nonferrous Metal Research, Xi'an 710016);Current Status of Development and Application of Metal Fibres[J];RARE METAL MATERIALS AND ENGINEERING;1998-06
5 Liu Gutian (Beijing General Research Institute for Nonferrous Metals,Beijing 100080);Metal Fibers and Recent Advances[J];RARE METAL MATERIALS AND ENGINEERING;1994-01
6 Tang Huiping Northwest Institute for Nonferrous Metal Research,P O Box 51, Xi'an Shaanxi, P R China Zhang Zhengde (Northwest Institute for Nonferrous Metal Research, Xi'an 710016);Developmental States of Porous Metal Materials[J];RARE METAL MATERIALS AND ENGINEERING;1997-01
7 Liu Haiyang,Liu Huiying and Wang Weixia (Shandong Helon Co,.Ltd.)Ma Haijian,Chen Yunfa (Weifang University);Current Status of Development and Expectation of Metal Fibres[J];Technical Textiles;2005-10
8 LI Meng JIANG Pei-Xue YU Lei REN Ze-Pei (Department of Thermal Engineering, Tsinghua Vniversity, Beijing 100084, China);EXPERIMENTAL RESEARCH OF FORCED CONVECTION HEAT TRANSFER IN SINTERED POROUS PLATE CHANNELS[J];Journal of Engineering Thermophysics;2003-06
9 Chen Geng; Luo Dian(Department of Thermal Engineering, Tsinghua University, Beijing 100084);AUGMENTATION OF CONVECTIVE HEAT TRANSFER BY MEANS OF HIGH POROSITY POROUS INSERT[J];JOURNAL OF ENGINEERING THERMOPHYSICS;1995-03
10 JIANG Peixue;WANG Buxuan REN Zepei(Thermal Engineering Department Tsinghua University,Beijing 100084);MICRO HEAT EXCHANGER AND RELEVANT PROBLEMS[J];JOURNAL OF ENGINEERING THERMOPHYSICS;1996-03
【Secondary References】
Chinese Journal Full-text Database 2 Hits
1 WANG Tian-Song QU Zhi-Guo HE Ya-Ling TAO Wen-Quan (State Key Laboratory of Multiphase Flow in Power Engineering,Xi'an Jiaotong University,Xi'an 710049,China);Experimental Study of Natural Convection on Metal Fiber Sintered Sheet[J];Journal of Engineering Thermophysics;2011-04
2 ZHI Hao,TANG Huiping,ZHU Jilei,WANG Jianzhong(State Key Laboratory of Porous Metals Materials,Northwest Institute for Non-ferrous Metal Research,Xi'an 710016,China);Current Research and Application of Metal Fiber[J];Hot Working Technology;2011-18
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Fan Wuyi,Huang Ri,Cai Bihua (Sichuan Union University,Chengdu 610065);STUDY ON THE PROPERTY OF STEEL FIBER/POLYMER COMPOSITES[J];Engineering Plastics Application;1997-06
2 Tan Songting Zhang Mingqiu Zeng Hanmin(Material Science Institute, Zhongshan University);Electroconductive Polymer Composites for Shielding EMI[J];JOURNAL OF MATERIALS ENGINEERING;1998-05
3 Tan Songting Zhang Mingqiu Rong Minzhi Zeng Hanmin Li Baoen (Materials Science Institute, Zhongshan University, Laboratory of Polymer Composite and Functional Materials, State Educational Commission of China);Study on Properties of Metal Fibre Filled Polymer Composites[J];JOURNAL OF MATERIALS ENGINEERING;1998-12
4 Liao Jichang;Zuo Caixcia;Wu Bende(Northwest institute for Nonferrous Metal Research, Xi' an 710016);Study of the Permeability of a Metal Fiber Medium with Graded Pore Size[J];RARE METAL MATERIALS AND ENGINEERING;1998-05
5 Xi Zhengping;Zhou Lian;Li Jian;Liao Jichang; Wu Lujian;Li Yalu;Li Jianping;Zhang Yanrong (Northwest Institute for Nonferrous Metal Research, Xi'an 710016);Current Status of Development and Application of Metal Fibres[J];RARE METAL MATERIALS AND ENGINEERING;1998-06
6 Xi Zhengping, Zhang Jian, Wu Lujian, Wang Xin, Zhou Lian (Northwest Institute for Nonferrous Metal Research, Xi’an 710016);Research on Some Properties of Austenitic Stainless Steel Fibres[J];Rare Metal Materials and Engineering;2000-06
7 Yang Zh aoling,Li Jianping,Xi Zhengping,Zhang Jian,Wang Xin(Northwest Institute for Nonferrous Metal Research,Xi ' an 710016,China);Preparation and Properties of the Su perfine Stainless-steel Fibers[J];Rare Metal Materials and Engineering;2003-09
8 Liu Gutian (Beijing General Research Institute for Nonferrous Metals,Beijing 100080);Metal Fibers and Recent Advances[J];RARE METAL MATERIALS AND ENGINEERING;1994-01
9 Tang Huiping Northwest Institute for Nonferrous Metal Research,P O Box 51, Xi'an Shaanxi, P R China Zhang Zhengde (Northwest Institute for Nonferrous Metal Research, Xi'an 710016);Developmental States of Porous Metal Materials[J];RARE METAL MATERIALS AND ENGINEERING;1997-01
10 Wang Zhi, Liao Jichang (Northwest Institute for Nonferrous Metal Research, Xi′an 710016) Han Xueyi (Northeastern University, Shengyang 110006);Study of the Pore Size of Stainless Steel Fibre Felt[J];RARE METAL MATERIALS AND ENGINEERING;1997-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved