Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of South China University of Technology(Natural Science Edition)》 2014-01
Add to Favorite Get Latest Update

Development and Swing Range Analysis of Base Fabric-Traverse Z-Shaped Weaving Device of Artificial Turf

You Dong-dong;Liu Peng;School of Mechanical and Automotive Engineering,South China University of Technology;  
In order to improve the bearing capacity of base fabric and the distribution uniformity of artificial turf,a base fabric-traverse device with eccentric wheel,which realizes the Z-shaped weaving of artificial turf,was developed. Then,the influence of Z-shaped swing range on the bearing capacity of base fabric of artificial turf was analyzed. Moreover,a virtual prototype model of the device was established,and the corresponding motion simulation and unloaded operation were carried out. Finally,tensile tests of the base fabric with a row spacing of 19 mm( 3/4 inches) and with four different swing ranges were conducted. The results indicate that,as compared with line-shaped artificial turf,Z-shaped artificial one is of better distribution uniformity and stronger bearing capacity of base fabric,and that the bearing capacity of base fabric becomes superior when the swing range is about half of the line spacing of artificial turf.
【Fund】: 高等学校博士学科点专项科研基金资助项目(20110172120025)
【CateGory Index】: TS959.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 5 Hits
1 BAO Yong-xia1,MAN Da1,2,LI Cong1,HAN Lie-bao1,3(1.Institute of Turfgrass Science,Beijing Forestry University,Beijing 100083,China; 2.General Affairs Office,Beijing Forestry University,Beijing 100083,China; 3.College of Gardening and Horticulture,Yangtze University,Jingzhou,Hubei Province 434025,China);Researches on the Sport Quality of Natural-Artificial Turf[J];Acta Agrestia Sinica;2012-01
2 ZHANG Shao-ping,DING Cai-hong,SUN Yi-ze(College of Mechanical Engineering,Donghua University,Shanghai 201620,China);Design of Transverse Movable Conjugate Yoke Radial Cam of Tufting Carpet Machine Based on Matlab[J];Journal of Donghua University(Natural Science);2007-05
3 Tian Zhi-xiang Wu Hong-tao(Department of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,Jiangsu,China);Dynamic Modeling and Simulation of Closed-Loop Dual-Arm Space Robots[J];Journal of South China University of Technology(Natural Science Edition);2011-08
4 RUAN Cen,MENG Zuo,YANG Yan-zhu (Donghua University Mechanical Department,Shanghai 201600,China);Study on pattern transverse motion controlling system of tufting machine[J];Machinery Design & Manufacture;2008-12
5 CHENG Hang-hang;Dynamical analysis of drive mechanism within a carpet tufting machine[J];Manufacturing Automation;2012-12
Chinese Journal Full-text Database 5 Hits
1 LIU Xue-peng1,HAO Xiao-hong2,ZHANG Dong-sheng3,HUANG Xiao-dong4(1.Department of Mechanical Engineering,Zhongshan Polytechnic,Zhongshan 528404,China; 2.School of Mechanical Engineering,Xi'an Jiaotong University,Xi'an 710049,China; 3.School of Mechatronics Engineering,University of Electronic Science and Technology,Chengdu 611731,China; 4.School of Mechatronics Engineering,Henan University of Science and Technology,Luoyang 471023,China);The Design of Electronic Cam Controller[J];Journal of Sichuan Ordnance;2013-05
2 SHEN Li-heng,MENG Zuo,ZHU Zi-na,SUN Jing-jing(College of Mechanical Engineering,Donghua University,Shanghai 201620,China);Research on servo pattern transverse motion controlling system of carpet tufting machine[J];Machinery Design & Manufacture;2012-02
3 XU Wenfu1,2,LIU Houde1,LI Cheng3,ZHANG Jintao1,2,LIANG Bin1,3(1.Shenzhen Graduate School of Harbin Institute of Technology,Shenzhen 518055,China;2.Shenzhen Key Lab of Digital Manufacturing Technology,Shenzhen 518055,China;3.Aerospace Dongfanghong Development Ltd,Shenzhen 518057,China);Autonomous Path Planning of Dual-arm Space Robot for Capturing Moving Target[J];Robot;2012-06
4 XU Wen-Fu 1,2 WANG Xue-Qian 1,3 XUE Qiang 1,2 LIANG Bin 1,3 1.Shenzhen Graduate School,Harbin Institute of Technology,Shenzhen 518055 2.Shenzhen Key Laboratory of Digital Manufacturing Technology,Shenzhen 518055 3.Aerospace Dongfanghong Development Co.,Ltd.,Shenzhen 518057;Study on Trajectory Planning of Dual-arm Space Robot Keeping the Base Stabilized[J];Acta Automatica Sinica;2013-01
5 ZHU Long-ying1,LU Ying-bo2,HONG Song3(School of Automotive and Traffic Engineering,Yancheng Institute of Technology1,Yancheng 224051,P.R.China; School of Mechanical Engineering,Jiangsu University2,Zhenjiang 212013,P.R.China; School of Mechanical Engineering,Changzhou University3,Changzhou 213164,P.R.China);Modeling and Adaptive Iterative Learning Control of Working Unit of Loader[J];Science Technology and Engineering;2012-34
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 YAO Yi-wen1,SONG Gui-long1,HAN Lie-bao1,ZHONG Liang2(1.Turfgrass Institute of Beijing Forestry University,Beijing 100083,China;2.Beijing Fengtai Sport Center,Beijing 100071,China);Analysis on the turf quality of soccer field in Beijing Fengtai Sport Center[J];Pratacultural Science;2008-05
2 Li Deying (China Agricultural University, Beijing 100094) Zhang Deshun (Beijing Workers′ Stadium, Beijing 100027);The Quality of Turf in Beijing Workers′ Stadium[J];ACTA PRATACULTURAL SCIENCE;1998-03
3 DING Cai-hong,ZHANG Shao-ping,SUN Yi-ze(College of Mechanical Engineering,Donghua University,Shanghai 200051,China);Kinematical analysis of the needle′s driving mechanism within a carpet tufting machine[J];Journal of Textile Research;2006-05
4 DING Caihong,YANG Yanzhu,SUN Yize(Carpet Equipment Research Centre,Donghua University,Shanghai 201620,China);State and outlook of research on shafting dynamics of carpet tufting machine[J];Journal of Textile Research;2007-08
5 MENG Zhan-feng, HAN Chao (School of Astronautics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China);Recursive Multi-body Dynamical Algorithm for Real-time Simulation of Spacecraft Using Spatial Operator Algebra[J];Acta Aeronautica Et Astronautica Sinica;2007-S1
6 FANG Xifeng~1 WU Hongtao~2 LIU Yunping~2 LU Yuping~3 WANG Tongyue~4 1.Institute of Mechanical and Power Engineering,Jiangsu University of Science and Technology,Zhenjiang 212003; 2.College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016; 3.College of Astronautics,Nanjing University of Aeronautics and Astronautics,Nanjing 210016; 4.Department of Mechanical Engineering,Huaiyin Institute of Technology,Huaian 223001;Computational Dynamics of Multi-body System Modeling Based on Spatial Operator Algebra Theory[J];Chinese Journal of Mechanical Engineering;2009-01
7 Gu Xiaoqin Liu Yanzhu(Department of Engineering Mechanics, Shanghai Jiaotong University,Shanghai, 200030));DEVELOPMENT OF RESEARCH ON DYNAMICS AND CONTROL OF SPACE MANIPULATOR[J];Advances In Mechanics;1997-04
8 Li De ying(China Agricultural University, Beijing) Warren F. Hunt(Agresearch Centre, New Zealand);Soccer Wear Simulation on Sport Turf Mixture[J];THANSACTIONS OF THE CHINESE SOCIETY OF AGRICULTURAL ENGINEERING;1997-02
9 WANG Cong-qing, SHI Zong-kun (College of Automation Engineering, Nanjing University of Aeronautics & Astronauts, Nanjing 210016, China);Optimizing Control of the Grasping Internal Force for a Free-Floating Dual-Arm Space Robot[J];Journal of Astronautics;2006-01
10 TIAN Fu-yang,WU Hong-tao,ZHAO Da-xu,SHAO Bing,WANG Chao-qun(Dept. Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Najing 210016,China);Research on Generalized Efficient Recursive Dynamics of Flexible Macro-Micro Space Robots System[J];Journal of Astronautics;2010-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved