Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of South China University of Technology(Natural Science Edition)》 2014-01
Add to Favorite Get Latest Update

Design of the Fourth-Order Transmission Error for Spiral Bevel Gears

Su Jin-zhan;Fang Zong-de;Cai Xiang-wei;Key Laboratory of Road Construction Technology and Equipment of the Ministry of Education,Chang'an University;School of Mechanical Engineering,Northwestern Polytechnical University;  
In order to obtain the amplitudes of different meshing transfer points and the minimum fluctuation of the transmission error under a given predesigned contact ratio and applied load,a design method of the fourth-order transmission error is proposed for the spiral bevel gears being cut via the modified roll method on the pinion. In the investigation,a symmetrical design of meshing position with predesigned contact ratio of spiral bevel gears is achieved by adjusting the direction of the contact path and the location of the reference point. Then,a high-order degeneration coefficient is deduced by means of the anti-TCA( Tooth Contact Analysis) method with a pre-designed expression of the fourth-order transmission error. Numerical results show that the fourth-order transmission errors with different amplitudes of meshing transfer points can be obtained by adjusting the former four coefficients of the polynomial,which affects the fluctuation of the loaded transmission error and the corresponding applied load; and that the fourth-order transmission error is controlled by the ease-off of the pinion surface.
【Fund】: 国家自然科学基金资助项目(51205310);; 长安大学中央高校基本科研业务费专项资金资助项目(2013G3252005)
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 6 Hits
1 FANG Zong de 1, YANG Hong bin 1, ZHOU Yan wei 2, DENG Xiao zhong 2 (1. Department of Air. Manufacturing Engineering, Northwestern Polytechnical University, Xi′an\ 710072, China) (2. Department of Mech. & Electronic Engineering, Luoyang Institut;OPTIMIZATION OF DYNAMIC MESHING BEHAVIOR OF HIGH SPEED SPIRAL BEVEL GEARS[J];Acta Aeronautica Et Astronautica Sinica;2001-01
2 FANG Zong\|de, LIU Tao, DENG Xiao\|zhong (Department of Mechanical Engineering, Northwestern Polytechnical University, Xi′an\ 710072, China);TOOTH CONTACT ANALYSIS OF SPIRAL BEVEL GEARS BASED ON THE DESIGN OF TRANSMISSION ERROR[J];Acta Aeronautica Et Astronautica Sinica;2002-03
3 Fang Zongde;Model and Approach for Loaded Tooth Contact Analysis (LTCA) of Gear Drives[J];Journal of Mechanical Transmission;1998-02
4 CAO Xuemei~1 FANG Zongde~1 ZHANG Jinliang~1 DENG Xiaozhong~2 1.School of Mechatronics,Northwestern Polytechnical University,Xi'an 710072; 2.School of Mechanical & Electronical Enginerring,Henan University of Science & Technology,Luoyang 471039;FUNCTION-ORIENTED ACTIVE TOOTH SURFACE DESIGN OF SPIRAL BEVEL GEARS[J];Chinese Journal of Mechanical Engineering;2007-08
5 SHENG Gang,SHEN Yun-bo(School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710032,China);Design and Analysis of Helical Gears with a High Order Transmission[J];Journal of Xi'an Technological University;2010-04
6 Wei Bingyang 1, Fang Zongde 1, Zhou Yanwei 2, Deng Xiaozhong 2 1.Northwestern Polytechnical University, Xi′an 710072; 2.Henan University of Science & Technology, Luoyang 471003;On Improving Design of Spiral Bevel Gear with Higher-Order Transmission Error Curve[J];Journal of Northwestern Polytechnical University;2003-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HU Yong1,ZHANG Xue-cheng1,YANG Zhao-jun1,ZHANG Jun1,2(1.College of Mechanical Science and Engineering,Jilin University,Changchun 130025,China;2.Department of Flight Theory,Aviation University of Air Force,Changchun 130022,China);Precision Cutting of Spiral Bevel Gear With Spherical Involute Tooth Profile[J];Journal of Beijing University of Technology;2011-05
2 Li Zhaowen Wang Yong Chen Zhenghong;Research Status and Prospect of Spiral Bevel Gears Technology[J];Tool Engineering;2007-10
3 DENG Xiao zhong 1,FANG Zong de 2,REN Dong feng 2,WEI Bing yang 2 (1.Luoyang Institute of Technology,Luoyang471039,China; 2.Northwest Polytechnic University,Xi'an710072,China);Study on Contact Ratio of Spiral Bevel Gears and Influence of Pitch Error[J];Journal of Aerospace Power;2002-02
4 DENG Xiao zhong 1,FANG Zong de 1,YANG Hong bin 2,WEI Bing yang 2 (1.Northwestern Polytechnical University,Xi'an710072,China; 2.Luoyang Institute of Technology,Luoyang471003,China);Strength Analysis of Spiral Bevel Gears with High Contact Ratio[J];Journal of Aerospace Power;2002-03
5 ZHANG Jin-liang~1,FANG Zong-de~1,DENG Xiao-zhong~2(1.School of Mechantronic Engineering,Northwestern Polytechnical University,Xi'an710072,China;2.School of Mechanical and Electronic Engineering,Henan University of Science and Technology,Luoyang471003,China);The Tooth-Cutting Design and Analysisfor Non-Zero Modified Spiral Bevel Gear[J];Journal of Aerospace Power;2004-05
6 CAO Xue-mei1,FANG Zong-de1,XU Hao2,ZHU Zi-bing3(1.School of Mechanical and Electronical Enginerring,Northwestern Polytechnical University,Xi'an 710072,China;2.Zhongnan Transmission Machinery Works of Changsha Aviation Industry,Changsha 410200,China;3.China Aviation Power Plant Research Institute,Zhuzhou 412202,China);Tooth surface design of spiral bevel gears based on meshing performances and work offset[J];Journal of Aerospace Power;2008-01
7 TANG Jin-yuan,LU Yan-feng,ZHOU Chao(Key Laboratory of Moden Complex Equiment Design and Manufacturing,Minstry of Eduction,School of Mechanical and Electrical Engineering,Central South University,Changsha 410083,China);Effect of machine tool adjustment parameter errors on spiral bevel gears tooth contact quality[J];Journal of Aerospace Power;2008-09
8 SHEN Yun-bo,FANG Zong-de,ZHAO Ning,GUO Hui(School of Mechatronics,Northwestern Polytechnical University,Xi'an 710072,China);Design of geometry transmission errors of helical face-gear drive[J];Journal of Aerospace Power;2008-11
9 CAO Xue-mei1,ZHANG Hua 1,FANG Zong-de2(1.School of Mechanical and Electronical Enginerring,Henan University of Science and Technology,Luoyang 471003,China;(2.School of Mechanical Enginerring,Northwestern Polytechnical University,Xi'an 710072,China);Design and analysis of loaded transmission errors for aviation spiral bevel gears[J];Journal of Aerospace Power;2009-11
10 GU Jian-gong,FANG Zong-de,PANG Hui,WANG Cheng(School of Mechatronics,Northwestern Polytechnical University,Xi' an 710072,China);Modeling and load analysis of spiral bevel gears power split system[J];Journal of Aerospace Power;2009-11
China Proceedings of conference Full-text Database 2 Hits
1 LIU Chun-hua,Feng Li-yan,YAN Zi-shen (Hebei Polytechnic University Tangshan Hebei 063009,China);3D Modeling and Simulating of Spiral Bevel Gears based on Pro / E[A];[C];2010
2 Deng Xiaozhong~1 , Fang Zongde~2, Wei Bingyang~(1,2) (1 Henan University of Science and Technology, Luoyang 471003, China; 2 Northwestern Polyteehnical University, Xi'an 710072, China);Analysis of Contact Stress and Bending Stress on Spiral Bevel Gears of High Contact Ratio[A];[C];2003
【Secondary Citations】
Chinese Journal Full-text Database 9 Hits
1 Tian Xingbin, Fang Zongde (10th Dept.Northwest Polytechnic University,Xi'an 710072,China);Overall Optimization on Machine-Tool Settings of Spiral Bevel Gears[J];JOURNAL OF AEROSPACE POWER;2000-01
2 Gao Jianping,Fang Zongde,Yang Hongbin (7th Dept.Norhwestern Polytechnical University,Xi'an 710072);ANALYSIS OF EDGE CONTACT FOR HYPOID GEAR AND SPIRAL BEVEL GEARS[J];JOURNAL OF AEROSPACE POWER;1998-03
3 Fang Zong de, Shen Yun-wen(Northwestern Polytechnical University, Xian, 7110072)Gao Xiang-qun (Nanhua Power plant Research Institute, Zhuzhou, 412002);AN ANALYSIS OF DYNAMIC BEHAVIOUR OF HELICAL GEAR TRANSMISSIONS[J];Acta Aeronautica Et Astronautica Sinica;1992-02
4 FANG Zong de 1, YANG Hong bin 1, ZHOU Yan wei 2, DENG Xiao zhong 2 (1. Department of Air. Manufacturing Engineering, Northwestern Polytechnical University, Xi′an\ 710072, China) (2. Department of Mech. & Electronic Engineering, Luoyang Institut;OPTIMIZATION OF DYNAMIC MESHING BEHAVIOR OF HIGH SPEED SPIRAL BEVEL GEARS[J];Acta Aeronautica Et Astronautica Sinica;2001-01
5 FANG Zong\|de, LIU Tao, DENG Xiao\|zhong (Department of Mechanical Engineering, Northwestern Polytechnical University, Xi′an\ 710072, China);TOOTH CONTACT ANALYSIS OF SPIRAL BEVEL GEARS BASED ON THE DESIGN OF TRANSMISSION ERROR[J];Acta Aeronautica Et Astronautica Sinica;2002-03
6 Fang Zongde;Model and Approach for Loaded Tooth Contact Analysis (LTCA) of Gear Drives[J];Journal of Mechanical Transmission;1998-02
7 WU Xun cheng,MAO Shi min, WU Xu tang (Xi′an Jiaotong University, Xi′an 710049);On Function-Oriented Design of Point-Contact Tooth Surfaces[J];MECHANICAL SCIENCE AND TECHNOLOGY;2000-03
8 Fang Zongde, Deng Xiaozhong(Northwestern Polytechnical University, Xi'an 710072);On Reducing Amplitude of Transmission Errorof Hypoid or Spiral Bevel Gear[J];Journal of Northwestern Polytechnical University;2002-02
9 Wei Bingyang 1, Fang Zongde 1, Zhou Yanwei 2, Deng Xiaozhong 2 1.Northwestern Polytechnical University, Xi′an 710072; 2.Henan University of Science & Technology, Luoyang 471003;On Improving Design of Spiral Bevel Gear with Higher-Order Transmission Error Curve[J];Journal of Northwestern Polytechnical University;2003-06
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved