Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of South China University of Technology(Natural Science Edition)》 2014-01
Add to Favorite Get Latest Update

Transmission Precision Analysis of Planetary Mechanism with Multi-Tooth Meshing

Lin Chao;Cai Zhi-qin;State Key Laboratory of Mechanical Transmission,Chongqing University;  
In this paper,first,the transmission principle of a new-type transmission mechanism,namely a planetary mechanism with multi-tooth meshing,was investigated. Next,based on the transmission principle,the influences of eccentric error,gear phase angle,elastic deformation and load on the transmission accuracy of the mechanism were analyzed,and a model was established to describe the transmission accuracy varying with the angle,with the corresponding transmission accuracy equations being also deduced. Then,the virtual prototype technology was adopted to perform a simulation and verification in ADAMS,and a simplified experiment was finally conducted to obtain the output angle error and the rotation error of the mechanism. It is found that the simulated results accord well with the mathematical ones,and that the transmission accuracy of multi-tooth meshing mechanism is much higher than that of the traditional planetary mechanism.
【Fund】: 国家自然科学基金资助项目(51275537)
【CateGory Index】: TH132.41
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 9 Hits
1 Wu Chi-sen;The Turning Angle Errer from Gears Eccentric Errer[J];;1982-04
2 LI Junyang,WANG Jiaxu,XIAO Ke,LIU Qiang(The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China);Backlash control and compensation for internal meshing involute spur gears[J];Journal of Chongqing University;2012-07
3 WANG Chaobing,CHEN Xiaoan,CHEN Hong,QIN Wei,WU Guoyang(The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,China);Influence of error's randomness on transmission accuracy of planetary gear[J];Journal of Chongqing University;2012-09
4 Zhu Zeng-bao Zhu Ru-peng Bao He-yun Jin Guang-hu(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,Jiangsu,China);Impacts of Eccentric and Installation Errors on Static Load Sharing Behaviors of Encased Differential Herringbone Train[J];Journal of South China University of Technology(Natural Science Edition);2011-08
5 Zhang Tie Xie Cunxi Ouyang Huifang (Dept. of Mechatronic Engineering, South China Univ. of Tech., Guangzhou 510641);INFLUENCE FACTORS OF REVERSE ERROR IN SHORT CYCLOIDAL PLANET REDUCTOR[J];JOURNAL OF SOUTH CHINA UNIVERSITY OF TECHNOLOGY(NATURAL SCIENCE);1999-02
6 ;Calculating the Return Stagnant Angle of the Gearing by Use of Probability Statistic[J];Mechanical and Electrical Equipment;2003-01
7 LI Ju - bo , HE Hong - xia, ZHANG Luo - ping, YANG Xiao - wei, LI Jian - feng (Electromechanical Engineering College, Henan University of Science & Technology, Luoyang 471003, China; Zhengzhou Aviation Industry Control University, Zhengzhou 450015, China; Luoyang Bearing Research Institute, Luoyang 471039,China);Analysis and Calculation of Precision of Gear Transmission[J];Coal Mine Machinery;2006-07
8 He En-yi Chen Yang-zhi Chen Zhen(School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou 510640,Guangdong,China);Effects of Assembly Errors on Transmission Precision of Space Curve Meshing Wheel[J];Journal of South China University of Technology(Natural Science Edition);2012-12
9 ZHAO Dong-sheng,WANG Zhong-hou,ZHANG Li-ping,XIE Yun-bo,ZHOU He-qun(Institute of Mechanical Engineering,Shanghai University of Science and Technology,Shanghai 200093,China);Exploration of the reliability of the stiffness analysis of the involutes spur gear based on CAE[J];Modern Manufacturing Engineering;2010-06
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 ZHANG Chun-sheng,MA Guo-xin(China North Vehicle Research Insititute,Beijing 100072,China);The Study of Speed-growth Device in the Electromagnetic Suspension System of the Tracked Vehicles[J];Vehicle & Power Technology;2007-03
2 LI Hong-wu,HU Pei-lin,CHEN Yan-qing(Science and Technology on Vehicle Transmission Laboratory,China North Vehicle Research Institute,Beijing 100072,China);Optimum Design of the Central Gear Position for Increasing the Life of a Compound Planetary Bearings[J];Vehicle & Power Technology;2010-03
3 LI Xin1,2,ZHANG Shi-jing2,XU Nan-shao1,2(1.Key Laboratory of Manufacture and Test Techniques for Automobile Parts,Ministry of Education,Chongqing University of Technology, Chongqing 400050,P.R.China;2.Chongqing Institute of Automobile,Chongqing University of Technology,Chongqing 400050,P.R.China);Characteristic analysis and simulation of a new-type continuously variable transmission carried in EV[J];Journal of Chongqing University of Posts and Telecommunications(Natural Science Edition);2012-01
4 Huang Hongcheng Wen Jubo National Engineering Laboratory for Automotive Electronics Control Techniques,Shanghai Jiaotong University;Analysis of the combinations of PS-CVT[J];Drive System Technique;2009-02
5 GUI Nai - pan GUO Hui - xin LUO You - xin (Hunan University of Arts and Science,Changde Hunan,415000);Theory and Method in Calcuationof Transmission Gear Ratio ofPlanetary Differential on JCharacteristic Diagram[J];;2004-03
6 WANG De-lun,ZHANG Shi-jing,XU Nan-Shao,LI Xin(Chongqing Automible College,Chongqing University of Technology,Chongqing 400050,China);Modeling and Simulation of Planetary Gear-type Continuously Variable Transmission of Electric Vehicle[J];Journal of Chongqing University of Technology(Natural Science);2010-11
7 ZHU Cai-chao 1,XIAO Ning 1,ZHANG Xiao-rong 2 1 State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,P.R.China 2 Chongqing University of Science and Technology,Chongqing 401331,P.R.China;Backlash analysis of a new planetary gearing with internal gear ring[J];重庆大学学报(英文版);2010-03
8 YE Hong-zhao,SUN Yi(Zhejiang Institute of Mechanical & Electrical,Hangzhou 310053,China);Development of NGW Planet Gear Reducer CAD System Based on Flexible Design Flow[J];Group Technology & Production Modernization;2007-04
9 YANG Shuwen (The 45th Research Institute of CETC, Beijing East YanJiao suburb 101601 China);Study on Mechanism and Driving Error of θ Axis for the Abrasive Dicing Saw[J];Equipment for Electronic Products Manufacturing;2009-04
10 HE Yan-zhong1,CHEN Wen-jia1,HUANG Jian-min2,XU Peng2,LI Zheng-qiang2(1.College of Mechanical Engineering,Yangzhou University,Yangzhou 225009,China;2.Precision Machine Tool Research Institute of Jiangsu Yang Li Group,Yangzhou 225127,China);Design of a new travel adjusting mechanism for press[J];Forging & Stamping Technology;2010-03
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Li Xinnian;Accuracy Control of Driving Backlash of Speed-reducer with High Accuracy and Low Gear-tooth Error[J];Ship Engineering;2003-06
2 XIAO Tieying; YUAN Shengzhi; LU Weijie;Calculative Method of load balence Coefficint in Planetary Gear[J];;1992-04
3 WANG Shi-long,QI Peng,ZHOU Jie,YANG Yong,LI Chuan,KANG Ling(The State Key Laboratory of Mechanical Transmission,Chongqing University, Chongqing 400044,P.R.China);Thermal deformation error analysis and a novel compensation method for NC gear hobbing machine tools[J];Journal of Chongqing University;2011-03
4 FU SHeng-lin (Northeast Research Institute of Electronic Technology,Jinzhou 121000,China);Influence of Retrace Tolerance on Gear Driving Precision[J];Electro-optics & Passive Countermeasures;2003-05
5 LIU Guang-lei1,FAN Hong-wei1,GU Ji-hong1,JIANG Ping2(1.School of Mechanical Engineering,Northwestern Polytechnical University,Xi'an 710072,China;2.China Aviation Powerplant Research Institute,Aviation Industry Corporation of China,Zhuzhou 412002,China);Half-modified roll for the optimization of transmission error function of spiral bevel gears[J];Journal of Aerospace Power;2010-08
6 SU Jin-zhan,FANG Zong-de,WANG Zu-bing(School of Mechanical Engineering,Northwestern Polytechnical University,Xi'an 710072,China);Study on meshing characteristics of helipoid gears with surface modification[J];Journal of Aerospace Power;2011-06
7 FANG Zong\|de, LIU Tao, DENG Xiao\|zhong (Department of Mechanical Engineering, Northwestern Polytechnical University, Xi′an\ 710072, China);TOOTH CONTACT ANALYSIS OF SPIRAL BEVEL GEARS BASED ON THE DESIGN OF TRANSMISSION ERROR[J];Acta Aeronautica Et Astronautica Sinica;2002-03
8 Li Zhengminqing,Zhu Rupeng(Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China);Impact of Assembly Deflection Error on Contact Characteristics of Orthogonal Face Gear Drive[J];Acta Aeronautica Et Astronautica Sinica;2009-07
9 SU Jinzhan,FANG Zongde*,CUI Yanmei School of Mechanical Engineering,Northwestern Polytechnical University,Xi'an 710072,China;Tooth Contact Analysis on Face Gears with Arcuate Tooth[J];Acta Aeronautica et Astronautica Sinica;2011-03
10 Li Zheng-min-qing Zhu Ru-peng(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,Jiangsu,China);Investigation into Geometrical Design of Tooth Profile and Undercut for Orthogonal Face Gear[J];Journal of South China University of Technology(Natural Science Edition);2008-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved