Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Jilin Electric Power》 2015-01
Add to Favorite Get Latest Update

Research and Design on the Rigid Flange Used in Steel Tube Tower

The calculation of rigid flange is an important joint-designing job for steel tube tower.Combined with the design practice of UHV engineering,we compared the provisions of rigid flange in DL/T 5154—2002 Technical Regulation of design for tower and pole structure of overhead transmission Line,DL/T 5254—2010 Technical regulation of design for steel tubular tower structures of overhead transmission Line and CECS236—2008 Technical Specification for steel communication mono pole,compared the differences between the calculation formula and its results,we found that the fange plate result in DL/T 5254—2010is slightly larger and the the reinforced plate result is smaller comparing with the other 2procedures.At last,the suggested design parameters for the calculation formula in DL/T 5254—2010are given out.
【CateGory Index】: TM753
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved