Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Heat Treatment of Metals》 2010-04
Add to Favorite Get Latest Update

Lanthanum zirconate thermal barrier coating prepared by atmospheric plasma spray

WANG Jing1,BAI Shu-xin2,LI Shun2,ZHANG Chang-rui2(1.College of Science,National University of Defense Technology,Changsha Hu′nan 410073,China)(2.College of Aerospace and Materials Engineering,National University of Defense Technology,Changsha Hu′nan 410073,China)  
La1.6Nd0.4Ce1.0Zr1.0O7(LNCZ)thermal barrier coating on Ni-based superalloy was prepared by atmospheric plasma spray with self-developed LNCZ thermal spray powder.Effect of process parameters on the deposition ratio,microstructure,bonding strength and thermal-shock resistance of LNCZ coatings was studied.The results show that increasing the power or decreasing the feed rate is useful to improve the deposition ratio,but deteriorates the coating′s bonding strength and thermal-shock resistance.The deposition ratio increases significantly as decreasing the spray distance.Also,the typical lamellar microstructure with appropriate porosity fraction can be obtained by low spray distance.And the microstructure is good for thermal-shock resistance.The optimum process parameters of LNCZ thermal barrier coating prepared by using DH-1080 equipment are that the power is 40 kW,the spray distance is 9 cm and the feed rate is 12 g/min.
【CateGory Index】: TG174.44
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 GUAN Hengrong, LI Meiheng, SUN Xiaofeng, ZHANG Zhongyuan, HU Wangyu GONG Shengkai, JIN Tao, ZHAO Nairen, HU Zhuangqi1) State Key Laboratory for Corrosion and Protection, Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 1100162) College of Materials Science and Engineering, Hunan University, Changsha 4100823) College of Materials Science and Engineering, Beijing University of Aeronautics Science and Astronautics, Beijing 100083;INVESTIGATION ON OXIDATION AND FAILURE OF THE THERMAL BARRIER COATING DEPOSITED ON SUPERALLOY[J];Acta Metallrugica Sinica;2002-11
Chinese Journal Full-text Database 10 Hits
1 SONG Wen-yan, LIU Zheng-tang, CUI Hu,LI Qiang, ZHAO Tie-cheng (School of Material Science and Engineering, Northwestern Polytechnical University, Xi'an 710072,China; N0.2 petroleum construction company of Si chuan, Chengdu 610213, China);Investigation on Si_3N_4 films prepared on sapphire substrate[J];Ordnance Material Science and Engineering;2005-05
2 LIU Rong 1,2) ,RU Hongqiang 3) ,ZHAO Yuan 3) , TANG Di 1) 1) Material Science and Engineering School,University of Science and Technique Beijing,Beijing 100083,China 2) College of Power,Nanjing Normal University,Nanjing 210042,China 3) Materials and Metallurgy School,Northeastern University,Shenyang 110004,China;Preparation process of ZrB_2/B_4C ceramic composites by pressureless sintering based on mechanical mixing[J];Journal of University of Science and Technology Beijing;2006-08
3 WU Yu-long~1,CAO Xiao-gang~2(1.Department of Environment & Chemistry,Wuhan Polytechnic College of Industry and Communication,Wuhan 430205,China;2.Beijing Bofang Biomaterials Co.Ltd,Beijing 100085,China);ZrO_2/Mica Glass-Ceramics Prepared by Incorporation Method[J];Glass & Enamel;2006-04
4 ZHENG Wei-hong,CHENG Jin-shu,QUAN Jian,WANG Hong-cheng,LOU Xian-chun (Key Laboratory of Silicate Materials Science and Engineering,Ministry of Education,Wuhan University of Technology,Wuhan 430070,P.R.China.);Crystallization and Properties of CaO-Al_2O_3-SiO_2 System Glass-ceramics Doped with Y_2O_3[J];Glass & Enamel;2007-01
5 LIANG xiao-feng 1,2,YANG shi-yuan 2,YIN guang-fu 1 (1.School of Materials Sci.and Eng.,Sichuan Univ.,Chengdu 610065; 2.School of Materials Sci.and Eng., Southwest Univ. of Sci. and Tech.,Mianyang 621002);Progress in Zirconia Toughened Aluminum Ceramic Composites Powders[J];Shandong Ceramics;2004-01
6 REN Shuai,SUN Kang-ning,LIU Ke,PANG Lai-xue (Key Laboratory of Engineering Ceramics of Shandong Province, Key Laboratory of Liquid Structure and Heredity of Materials Ministry of Education, Shandong University, Jinan 250061, China);Preparation of Ti_3Al/TiC+ZrO_2 Composites by Hot-press Sintering[J];Journal of Materials Engineering;2007-01
7 ZHAO Zhong-min~1, ZHANG Long~1, WANG Jian-jiang~(1,2), YIN Yu-jun~1,LI Jun-shou~1(1.Institute of Advanced Materials, Ordnance Engineering College, Shijiazhuang 050003, China,;2.College of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China);Microstructures and fracture of nano-micron bulk multiphase ceramics fabricated by the SHS metallurgical process[J];Material Science and Technology;2004-04
8 WANG Hong-xiang1,GAO Shi1,MA En-cai1,XU Qiao2,CHEN Xian-hua2,HOU Jing2(1.School of Mechanical Electrical Engineering,Harbin Institute of Technology,Harbin 150001,China;2.Chengdu Fine Optical Engineering Research Centre,Chengdu 610041,China);Near-surface mechanical properties of KDP crystals in single point diamond turning[J];Materials Science and Technology;2007-01
9 PAN Chuan-zeng,ZHANG Long,ZHAO Zhong-min,ZHANG Jing,YANG Quan,QU Zhen-sheng(Institute of Advanced Materials,Ordnance Engineering College,Shijiazhuang 050003,China);Large bulk solidified Al_2O_3/ZrO_2(4Y) prepared by combustion synthesis under high gravity[J];Materials Science and Technology;2009-01
10 WANG Yong-jun,WANG Feng-hui,WU Ying-xi(Department of Engineering Mechanics,Northwestern Polytechnical University,Xi'an 710072,China);Stress Analysis of Thermal Barrier Coating's Failure under Thermal Shock[J];Journal of Materials Science and Engineering;2007-03
China Proceedings of conference Full-text Database 3 Hits
1 Hangong Wang, Wengai Sun, Hui Yang, The second artillery engineering college, Xi 'an/China;Improvement in the Study of the Ceramic Thermal Barrier Coatings[A];[C];2004
2 LI Xia, ZHONG Tao-xing, ZHANG Xiao-feng(The Key Laboratory of Advanced Functional Materials Ministry of Education, Beijing University of Technology, Beijing 100022, China);Effect of Particle Size and Crystallin Phase Content on Fracture Toughness of Feldspathic Porcelain Prepared by SPS[A];[C];2005
3 Yu Wang~*,Jun Liang,Wenbo Han,Xinghong Zhang (Center for Composite Materials,Harbin Institute of Technology,Harbin 150001);Appearance of Fracture and Toughening Mechanisms of ZrB_2-Based Ceramics[A];[C];2008
【Secondary Citations】
Chinese Journal Full-text Database 4 Hits
1 Li Meiheng Zhang Zhongyuan Sun Xiaofeng Hu Wangyu Guan Hengrong( Department of Applied Physics,Hunan University,Changsha,410082) ( Institute of Metal Research,Chinese Academy of Sciences,Shenyang, 110015);Investigation of Morphology and Phase Structure Feature of TBC[J];Materials Review;2001-01
2 XU Hui\|bin, GONG Sheng\|kai, LIU Fu\|shun (Department of Materials Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing\ 100083,China);RECENT DEVELOPMENT IN MATERIALS DESIGN OF THERMAL BARRIER COATINGS FOR GAS TURBINE[J];ACTA AERONAUTICA ET ASTRONAUTICA SINICA;2000-01
3 LI Meiheng , SUN Xiaofeng, ZHANG Zhongyuan, GONG Shengkai, HU Wangyu , GUAN Hengrong , HU Zhuangqi (Institute of Metal Research, The Chinese Academy of Sciences, Shenyang 110016) (College of Materials Science and Engineering, Beijing University of Aeronau;OXIDATION AND PHASE STRUCTURE OF THE BOND COAT IN EB-PVD THERMAL BARRIER COATINGS DURING THERMAL CYCLING[J];Acta Metallrugica Sinica;2002-01
4 LOU Hanyi(Corrosion Science Laboratory, Institute of Corrosion and Protection of Metals, Chinese Academy of Sciences, Shenyang) TANG Youjun, SUN Xiaofeng,GUAN Hengrong(Institute of Metals Research, Chinese Academy of Sciences,Shenyang);OXIDATION BEHAVIOUR OF SPUTTERED MICRO-GRAINED SUPERALLOY K17F AT HIGH TEMPERATURES[J];ACTA METALLRUGICA SINICA;1994-15
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved