|
| 1 |
Yang Junqiu (Department of Mechanical Engineering, Wuhan Institute of Shipbuilding Technology, Wuhan 430050, China);BLEMISHES OF TRANSPARENT PLASTICS PIECE BY INJECTION MOULDING AND THEIR SOLUTIONS[J];Engineering Plastics Application;2005-07 |
| 2 |
Wen Zhiyuan,Zhou Mingjie Lin Xizhou (Guangdong Industry Technical College,Guangzhou 510300,China)(Foshan Plastic Industry Research Institute,Foshan 528000,China);DESIGN OF INJECTION MOULD FOR THE OUTER SHELL OF WASHING MACHINE FILTER[J];Engineering Plastics Application;2007-07 |
| 3 |
Guo Xinling(Shanxi Polytechnic Institute,Xianyang 712000,China);APPLICATION OF THROTTLE VALVE IN INJECTION MOULD[J];Engineering Plastics Application;2007-09 |
| 4 |
Fu Wei,Fan Shijuan,Zhang Hai(School of Mechatronic Engineering,East China Jiaotong University,Nanchang 330013,China);CHOICE OF GATE LOCATION AND STYLE IN INJECTION MOULD DESIGN[J];Engineering Plastics Application;2007-10 |
| 5 |
Zhou Huilan(College of Mechanical and Electrical Engineering,East China Jiaotong University,Nanchang 330013,China);DESIGN OF INJECTION MOULD FOR TREAD THIMBLE[J];Engineering Plastics Application;2008-02 |
| 6 |
Wen Zhiyuan,Zhou Mingjie Lin Xizhou (Guangdong Industry Technical College,Guangzhou 510300,China)(Foshan Plastic Industry Research Institute,Foshan 528000,China);DESIGN OF INJECTION MOULD FOR THE WAVE WHEEL OF WASHING MACHINE[J];Engineering Plastics Application;2008-05 |
| 7 |
Hong Jianming(School of Mechanical and Electrical Engineering,Shenzhen Polytechnic,Shenzhen 518055,China);DESIGN OF INJECTION MOULD FOR FRONT SAFETY GUARD OF MOTORCYCLE[J];Engineering Plastics Application;2008-07 |
| 8 |
Huang Guijian1,Wu Xiaoyu2,Liang Xiong1,Li Jibin2,Wu Haitang3 (1.College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China; 2.Shenzhen Key Laboratory of Advanced Mould Manufacturing Technology,Shenzhen University,Shenzhen 518060,China; 3.Dongguan Konka Mould Plastic Co. Ltd.,Dongguan 523685,China);DESIGN OF INJECTION MOULD WITH MECHANISM SET INSIDE CORE-PULLING SLIDE PREVENTING PLASTIC PARTS FROM ADHERING TO MOULD[J];Engineering Plastics Application;2009-05 |
| 9 |
Jin Dun-shui;The Injection Mold Design of Shower Head Receptacle[J];Journal of Anhui Vocational College of Electronics & Information Technology;2008-04 |
| 10 |
XIAO Hong-sheng(Jiangsu Tongzhou Sunway Machinery Manufacturing Co.,Ltd.226300);The Design of Mold-closing Shaping Pressure-keeping Construction of the Full Automatic Shoulder-injection Machine[J];Packaging and Food Machinery;2005-06 |
|
