Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Physical Testing and Chemical Analysis(Part A:Physical Testing)》 2017-07
Add to Favorite Get Latest Update

Effect of Milling and Shot Peening Processes on Residual Stress and Full Wave at Half Maximum of TC4 Titanium Alloy

WANG Xin;XU Kunhao;LI Zhenxi;PEI Chuanhu;YANG Qing;TANG Zhihui;Surface Engineering Institution,AECC Beijing Institute of Aeronautical Materials;Aviation Key Laboratory of Advanced Corrosion and Protection on Aviation Materials,AECC Beijing Institute of Aeronautical Material;Technology Research Institute,Wuxi Turbine Blade Co.,Ltd.;Titanium Alloy Institution,AECC Beijing Institute of Aeronautical Materials;Technical Centre,AECC Shenyang Liming Aero-engine Group Corporation Ltd.;  
The distribution of residual stress and full width at half maximum(FWHM)of TC4 titanium alloys after milling and shot peening process was investigated by the X-ray diffraction method.The results show that:the distribution of residual stress and FWHM was co-effected by both the cutting action and plastic deformation action in milling process;the higher the cutting line speed was,the stronger the cutting action was,which made a lower,thinner and compressive residual stress distribution,and moreover,and line speed had a little influence on surface FWHM;the larger cutting depth was,the stronger the deformation action was,which made a complex residual stress distribution and a high FWHM on the surface;shot peening induced a compressive residual stress distribution like a inverted hook,in which the maximum value of the compressive stress was close to the yield strength;the depth of plastic deformation layer of shot peening was larger than that of milling,making the residual stress distribution consistent with each other which was different after milling and before peening.
【Fund】: 航空基金资助项目(2015ZF21017);; 中航工业技术创新基金资助项目(2013E62137R)
【CateGory Index】: TG54;TG668
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 9 Hits
1 LI Ying;ZHANG Chengcheng;GAO Jingyun;REN Yuan;LI Quantong;JIAO Shengbo;AVIC Commerical Aircraft Engine Co, Ltd, Shanghai Engineering Research Center of Commercial Aircraft Engine;Aeronautics and Astronautics Engineering College, Air Force Engineering University;;HIGH-CYCLE AND GIGA-CYCLE FATIGUE PROPERTIES OF TITANIUM ALLOY FOR AERO-ENGINE[J];力学与实践;2016-03
2 WANG Xin1,LI Si-qing1,MENG Zhen-wei2,TANG Zhi-hui1(1.Beijing Institute of Aeronautical Materials,Beijing 100095,China;2.Shenyang Liming Aero-Engine(Group) Corporation Ltd.,Shenyang 110043,China);Influence of Shot-Peening Coverage on Surface Integrity of TC4 Titanium Alloy[J];航空材料学报;2013-03
3 LUO Xinmin~(1)),ZHAO Guangzhi~(1)),ZHANG Yongkang~(2)),CHEN Kangmin~(1,3)).LUO Kaiyu~(2)), REN Xudong~(2)) 1) School of Material Science and Engineering,Jiangsu University,Zhenjiang 212013 2) School of Mechanical Engineering,Jiangsu University,Zhenjiang 212013 3) Analysis and Test Center,Jiangsu University,Zhenjiang 212013;LASER SHOCK PROCESSING OF Ti-6A1-4V AND ANALYSIS OF ITS MICROSTRUCTURE RESPONSE[J];金属学报;2012-09
4 WANG Xin1,LI Zhen-xi2,LU Feng1,PEI Chuan-hu2,YANG Qing3,SONG Ying-gang1(1.Laboratory 5,Beijing Institute of Aeronautical Material,Beijing 100095,China; 2.Laboratory 15,Beijing Institute of Aeronautical Material,Beijing 100095,China; 3: Technology Centre,Shenyang Liming Aero-Engine(Group) Corporation Ltd,Shenyang 110043,China);Effect of shot peening on grinding surface integrity of TC4 titanium alloy[J];材料热处理学报;2012-S1
5 Xu Honghao,Zuo Dunwen,Zhu Xiaoxiao,Wang Min(College of Mechanical and Electrical Engineering,Nanjing University of Aeronautics & Astronautics,Nanjing,210016,China);Fatigue Resistance Improvement of TC4 Titanium Alloy with High Speed Milling Under Stretching Fixation[J];南京航空航天大学学报;2008-02
6 L Ke-mao(Handan Stree Technologies Co.Ltd.,Handan 056000,China);BASIC KNOWLEDGE OF RESIDUAL STRESS DETERMINATION——LECTURE No.4 STRESS DETERMINATION METHOD BY X-RAY(Ⅱ)[J];理化检验(物理分册);2007-08
7 Zhao Zhenye (Beijing Institute of Aeronautical Materials,Beijing 100095,China);Investigation and Development Status of the Application Technology to Improve Fatigue Behavior of High Strength Alloys[J];中国工程科学;2005-03
8 CAI Jianming LI Zhenxi MA Jimin HUANG Xu CAO Chunxiao (Lab of Titanium Alloys,Beijing Institute of Aeronautical Materials,Beijing 100095);Research and Development of 600℃ High Temperature Titanium Alloys for Aeroengine[J];材料导报;2005-01
9 REN Jinxin, et al;Grinding Burn and Crack of Titanium Alloy[J];制造技术与机床;2000-10
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 HUANG Xiao-bo;LIU Hong-fei;GAO Yu-kui;XU Kun-hao;School of Aerospace Engineering and Applied Mechanics, Tongji University;;Distribution Rule of Residual Stress Field of Zirconium Alloy Induced by Shot Peening[J];表面技术;2018-01
2 TIAN Tengteng;CHEN Yan;TAN Yue;LIU Yongjian;School of Mechanical Engineering and Automation,University of Science and Technology Liaoning;;Optimization of Process Parameters for Electrolytic Magnetic Abrasive Grinding of Titanium Alloy[J];电镀与精饰;2018-01
3 WANG Guo-fu;ZHOU Qing-jun;JIANG Lu-bao;Plate Branch,Baosteel Special Metals Co.,Ltd.;Research Institute,Baoshan Iron and Steel Co.,Ltd.;;Discussion about the on-line pickling process of titanium and titanium alloy plate[J];物理测试;2017-06
4 LOU Yanzhi;LI Chunzhi;LI Xudong;XIE Xiaochang;ZHAO Zhenye;AECC Beijing Institute of Aeronautical Materials;;Surface Integrity Characteristics and Fatigue Failure Mechanism of Carburized M50NiL Steel[J];航空材料学报;2017-06
5 AI Yingjun;WANG Xin;SONG Yinggang;WANG Qiang;LUO Xuekun;TANG Zhihui;ZHAO Zhenye;AECC Beijing Institute of Aeronautical Materials;Aviation Key Laboratory of Advanced Corrosion and Protection on Aviation Materials,AECC Beijing Institute of Aeronautical Materials;;Effect of Cold Expansion on Fatigue Life of Hole Structure of TC17 Titanium Alloy[J];航空材料学报;2017-06
6 Wang Chang;Zhang Tao;Fu Mingjie;Cai Hengxin;Shenyang Aircraft Industry Group Co.,Ltd.;Beijing Aeronautical Manufacturing Technology Research Institute;Aeronautical Key Laboratory for Plastic Forming Technologies;Beijing Key Laboratory of Digital Plasticity Forming Technology and Equipment;;Microstructure and properties of TIG welding on TNW700 titanium alloy sheets[J];焊接;2017-11
7 SHI Xiaoyun;HAO Fang;ZHANG Xiaoyuan;LEI Jinwen;LOU Meiqi;WANG Jinli;NLEL for Special Titanium Alloy Material Manufacturing,Western Superconducting Technologies Co.Ltd;State Key Laboratory of Solidification Processing,Northwestern Polytechnical University;AECC Xi'an Aero-Engine LTD;;Influence of Deformation on Microstructures and Mechanical Properties of TC25 Titanium Alloy Cake Billet[J];材料开发与应用;2017-05
8 QI Fengli;CHENG Yongqiang;College of information engineering, Taiyuan University of Technology;Institute of Material Science and Engineering, Taiyuan University of Technology;;Effect of Thermal Oxidation on Low Elastic Modulus of Titanium Alloy Ti-33Nb-4Sn Surface Oxide Layer[J];热加工工艺;2017-18
9 XIE Junfeng;HE Shengxin;LI Jiqiang;LI Dalei;School of Mechanical Engineering, Zhengzhou University;Zhengzhou Research Institute of Mechanical Engineering;;Effect of Shot Peening on Properties of 18CrNiMo7-6 Carburizing Gear Surface[J];热加工工艺;2017-18
10 YANG Xukun;ZHU Ying;HUANG Shuai;SUN Rujian;School of Mechanical Engineering and Automation, Beijing University of Aeronautics and Astronautics;School of Physics Science and Nuclear Energy Engineering, Beijing University of Aeronautics and Astronautics;;Influence of Laser Shock Peening on Hardness and Tensile Property of TC17[J];热加工工艺;2017-18
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LI Jiu-kai;LIU Yong-jie;WANG Qing-yuan;HOU Fang;Key Laboratory of Ministry of Education for Energy Engineering Safety and Disaster Mechanics,College of Architecture and Environment,Sichuan University;School of Aeronautics and Astronautics,Sichuan University;;High-temperature ultra-high cycle fatigue test of TC17 titanium alloy[J];航空动力学报;2014-07
2 GAO Chao1,CHENG Li1,PENG Hua2,SHEN Jing-sheng1, QIU Chen-lin1,LIU Yan-jie1 (1.The Engineering Institute,Air Force Engineering University,Xi'an 710038,China; 2.School of Communication Engineering, Chong Qing University,Chongqing 400044,China);Investigation of ultra-high cycle fatigue behavior of TC17 alloy at a frequency of 20kHz[J];航空动力学报;2012-04
3 LI Quan-tong,LIU Qing-chuan,SHEN Jing-sheng, CHENG Li,GAO Chao,CHEN Wei(School of Engineering,Air Force Engineering University,Xi'an 710038,China);Experiment on ultra-high cycle bending vibration fatigue of titanium alloy TC17[J];航空动力学报;2012-03
4 Luo Xinmin1 Zhang Jingwen1 Ma Hui1 Zhang Yongkang2Chen Kangmin1,3 Ren Xudong2 Luo Kaiyu2(1School of Material Science and Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China2School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China3Analysis and Test Center,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Dislocation Configurations Induced by Laser Shock Processing of 2A02 Aluminum Alloy[J];光学学报;2011-07
5 HUANG Xin-chun,ZHANG Ding-hua,YAO Chang-feng,et al(Key Lab of Contemporary Design and Integrated Manufacturing Technology,Ministry of Education,Northwestern Polytechnical University,Xi'an 710072);Research on High-efficient and Anti-fatigue Grinding Machining Technology[J];航空精密制造技术;2011-03
6 Zou Shikun1,2 Gong Shuili1 Guo Enming2 Li Bin2 1National Key Laboratory for High Energy Density Beam Processing Technology,AVIC Beijing Aeronautical Manufacturing Technology Research Institute,Beijing 100024,China 2School of Mechanical Science and Engineering,Huazhong University of Science and Technology,Wuhan,Hubei 430074,China;Laser Peening of Turbine Engine Integrally Blade Rotor[J];中国激光;2011-06
7 Zhou Jianzhong Fan Yujie Huang Shu Ruan Hongyan Zhu Wei Wei Denghui Wang Chengdong Chen Hansong(School of Mechanical Engineering,Jiangsu University,Zhenjiang,Jiangsu 212013,China);Research and Prospect on Micro-Scale Laser Shot Peening[J];中国激光;2011-06
8 Zhong Minlin Fan Peixun(Key Laboratory for Advanced Materials Processing,Ministry of Education,Laser Processing Research Centre,Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China);Applications of Laser Nano Manufacturing Technologies[J];中国激光;2011-06
9 YIN Zhibo1,LI Fuyuan1,LI Shihong2(1.School of Mechatronic Engineering,Xi'an Technological University,Xi'an 710032 China;2.China Qing'an Aviation Industry Group Co.,Ltd,Xi'an 710077,China);Study of Titanium and Titanium Alloy Grinding Process[J];新技术新工艺;2011-03
10 Xu Haiying Zou Shikun Che Zhigang Cao Ziwen(National Key Laboratory of High Energy Density Beam Processing Technology,AVIC Beijing AeronauticalManufacturing Technology Research Institute,Beijing 100024,China);Influence of Laser Shock Processing Times on TC4 Argon Arc Welding Joint Microstructure and Properties[J];中国激光;2011-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved