Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《DIE & MOULD INDUSTRY》 2000-01
Add to Favorite Get Latest Update

A Section-Extruding Expert System Based on Finite Element Mock

Liu Hanwu et al(16)  
By adopting BP nervous network to organize and train the sample produced by the result of FEM (finite element mock) during the course of extruding section material, a corresponding relation was set up between geometric parameters of the die and force power parameters such as stress and strain. Thus the mock was set up during the course of extrusion. And based on this, the corresponding expert system was set up. This system has very good expanding properties and provides with a new study direction for further development of the expert system.
【CateGory Index】: TG37
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 4 Hits
1 Bai Run Guo Qiwen (School of Material Science and Engineering, Beijing Institute of Technology, Beijing 100081);Current Status and Outlook of Expert System in Material Science[J];宇航材料工艺;2004-04
2 Peng Biyou, et al;Research on CAD/CAE/CAM intergrated system of aluminum profiles extrusion die[J];电加工与模具;2003-05
3 ZENG Shan qi 1 , DING Yi 2 , XIE Yang qiu 1 (1.Mechanical and Electrical Engineering College , Shaanxi University of Science & Technology, Xianyang 712081,China; 2.Design College ,Shaanxi University of Science & Technology, Xianyang 712081,China);THE APPLY OF ARTIFICIAL NEURAL NETWORK IN THE MANUFACTURE OF BENDING MODEL——THE ANALYSIS OF RESILIENCE IN BENDED PARTS[J];陕西科技大学学报;2003-02
4 GAO Jun,ZHAO Guo-qun,LI Li-hua (Materials College of Shan dong University,South Campus,Jinan Shan dong,250061China);Status and Development Trend of Extrusion Technology of Alu minum Alloy Profile[J];汽车工艺与材料;2002-06
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 Wang Chunwei Lai Lian(Guangxi University, Nanning, China)Wang Qiang (Jilin University of Technology,Changchun, China);Expert System for Diagnosing and Analyzing the Defects of Casting[J];特种铸造及有色合金;2002-02
2 LI Tao,CUI Jian jun,JIANG Tao,FENG Qi ming,FAN Xiao hui (Department of Mineral Engineering,Central South University, Changsha 4110083, China);Expert system for abnormality diagnosis in sintering process SPADES(Ⅰ)——General programming[J];中南工业大学学报(自然科学版);2001-04
3 LU Hong yuan 1, LEE W.B. 2 (1.Shenyang Research Institute of Foundry, Shengyang 110022, Liaoning, China; 2.Hong Kong Polytechnic University,Hongkong, China);Construction of DCES Expert System For Die Casting Defects and Their Countermeasure[J];铸造;2001-04
4 HOU Ying-wei (Dalian Railway Institute Dalian 116028) WANG Xiao-ming (Dalian University of Technology)\;;THE STUDY OF FORGINGS DEFECTS DIAGNOSIS EXPERT SYSTEM[J];塑性工程学报;2001-01
5 LIU Huinan, LI Jingyuan, LIU Jing'an, XIE Jianxin (Materials Science and Engineering School, UST Beijing, Beijing 100083, China; Southwest Aluminium Fabrication Plant, Chongqing 401326, China);Database System for Design of Extrusion Dies[J];北京科技大学学报;2001-01
6 Nanchang University Yan Hong Bao Zhongxu Liu Hesheng Wang Meiyan;Building frame structure in profile extrusion die CAD/CAE/CAM system[J];锻压技术;2000-06
7 Wang Chen et al;Analysis on the Forming and the Resilience of the 3_D S_Rail Plate[J];模具工业;2000-08
8 Li Yanchun;Design of the Extruding Mould for the Large Flat Rectangular Tubes[J];模具工业;2000-08
9 Qi Hongyuan et al(33);Optimization of the Parameters of the Extruding Die for Special_Typed Metals[J];模具工业;2000-02
10 DENG Ru - rong (Shaoguan Mould & Die Factory, Shaoguan 512023, China);Defining Key Parameters in Designing Porthole Die[J];轻合金加工技术;2000-02
【Secondary References】
Chinese Journal Full-text Database 10 Hits
1 Xiao Han;Ma Ruifeng;Patent Examination Cooperation Hubei Center of the Patent Office,SIPO;;Analysis on Domestic and Foreign Patent Application for Aluminum Extrusion Die[J];河南科技;2015-10
2 WU Jichao1,ZHANG Yanqiu2,ZHAO Yanan2,JIANG Shuyong2,SHAN Debin3 1.Engineering Technology Department,Harbin Aircraft Industry Group Co.,Ltd.,Harbin 150060,China 2.Industrial Training Centre,Harbin Engineering University,Harbin 150001,China 3.School of Materials Science and Engineering,Harbin Institute of Technology,Harbin 150001,China;Digital design of isothermal precision forming of complex disk forging[J];应用科技;2013-01
3 HU Shuiping,GAO Xiaodan,REN Xueping,TANG Di School of Materials Science and Engineering,University of Science and Technology Beijing,Beijing 100083,China;Microstructural evolvement rule of extrusions in continuous variable cross-section extrusion[J];北京科技大学学报;2008-07
4 LIU Zheng-jun1, ZHAO Dong-ning2, HAO Xue-feng2, CI Hong-gang1, SONG Xing-kui1 (1. School of Materials Science and Engineering, Shenyang University of Technology, Shenyang 110023, Liaoning, China; 2. The Academe of Shenyang Special Equipment, Shenyang 110035, Liaoning, China);Effect of Ce on Microstructure and Mechanical Properties of Hot-Extruded Al-Mg Alloys[J];铸造;2008-07
5 LIU Bin TANG Aitao PAN Fusheng WANG Jingfeng (College of Materials Science and Engineering,Chongqing University,Chongqing 400044);Development and Applications of Expert Systems in Materials Science[J];材料导报;2007-10
6 ZHANG Hua1,DONG Chao-yang1,XIE Yong-jun2(1.School of Automation Science and Electrical Engineering,Beihang University,Beijing 100083,China;2.Beijing Institute of Aeronautical Material,Beijing 100095,China);Quality Control Approach for Casting Based on Neural Network and Expert System[J];测控技术;2007-02
7 Zhang Peixin~(1,2) Wen Qiyye~3 Liu Jianhong~1 Xu Qiming~2 Zhang Qianling~1 Ren Xiangzhong~1 Hong Weiliang~1 (1.Department of Chemistry,Normal Collage,Shenzhen University,Shenzhen,518060,Guangdong,China; 2.School of Materials Science and Engineering,Xi'an University of Architecture and Technology,Xi'an 710055,Shanxi,China; 3.School of Microetectronic and Solid-electronic,University of Electronic Science and Technology of China,Chengdu,610054,Sichuan,China);Slag glass-ceramic material designing expert system[J];计算机与应用化学;2006-08
8 YUAN Yun-long(Ningbo University of Technology,Ningbo 315016,China);Raw Material Selection for Plastics Products Based on Expert System[J];轻工机械;2006-02
9 XU Chan-juan~(1,2),MA Bao-guo~2,HAO Xian-cheng~2,JIAN Shou-wei~2(1.PLA Unit 63653,Malan 841700,China;2.Key Laboratory for Silicate Materials Science and Engineering of Ministry of Education,Wuhan University of Technology,Wuhan 430070,China);Design of Expert System of Low Environment Load Cement Clinker System[J];武汉理工大学学报;2005-11
10 LI Jun, FU Jian, ZHANG Yong-hui, LI Guang-ming(School of Material Science and Engineering of Xihua University,Chengdu 610039 Sichuan China);The Current Situation and Trend about CAE Application of Aluminum Profiles Extrusion Die[J];四川工业学院学报;2004-S1
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved