Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2000-12
Add to Favorite Get Latest Update

线切割加工塌角的形成及对策

The cause of sunk angles in processing a part by wire cutting was analyzed. And the measures to avoid them were proposed and can serve as a reference to the others in the industry.
【CateGory Index】: TG48
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 ;The Reasons and Solving Steps of Affecting WEDM Processing Quality[J];Die & Mould Manufacture;2006-09
【Co-references】
Chinese Journal Full-text Database 9 Hits
1 Wu Yunbo et al.(14);An autoprogramming technology for realizing cutting Chinese characters with WEDM[J];ELECTROMACHINING & MOULD;2000-02
2 Guo Yanling et al.(22);Tangential compensation of taper parts cut by HS-WEDM[J];ELECTROMACHINING & MOULD;2000-04
3 Zhao Yongshun (Institute 720,Beijing University of Aeronautics and Astronautics,Beijing,100083) Liu Zhengxun,Yu Chengye (Faculty 502,Nanjing University of Aeronautics and Astronautics,Nanjing,210016);STUDIES OF THE PROFILE SYNTHESIS IN THE FOUR-AXES SIMULTANEOUS CONTROL WIRE-EDM[J];Acta Aeronautica Et Astronautica Sinica;1995-06
4 No. 792 Factory Li Qixin;Reasons for Crack and Deformation of Die During Wire Cut and Methods to Prevent[J];Metal Forming Technology;1998-01
5 An Luting;Xu Xiaofeng ;Zhou Laishui; Zhou Rurong(Research Center of CAD/CAM Engineering, NUAA, Nanjing, 210016);An Algorithm for the Set Operation of Loops[J];COMPUTER AIDED ENGINEERING;1999-04
6 XU Xiao feng,ZHOU Ru rong,AN Lu ling,ZHOU Lai shui (Nanjing University of Aeronautics and Astronautics, Nanjing 210016);On Two-Axis NC Programming Based on ACIS[J];Mechanical Science and Technology;2002-01
7 Lu ZhanzhengHu Zhanqi(Luoyang Institute of Technlology)(Yanshan University)Liu Luqun Wu Ziyue Lin Yisong(Luoyang Institute of Technology);The Movement Relationship of 4Axis WireElectode Cutting[J];JOURNAL OF LUOYANG INSTITUTE OF TECHNOLOGY;1998-02
8 YANG Lan-yu, GENG Lei (Heilongjiang Institute of Science and Technology, Jixi 158105, China);The method of realizing Chinese character contour's automatic edition in numerical control line cutting[J];Coal Technology;2001-03
9 Qian Xiaofeng, An Luling, Chen Chen College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics & Astronautics Nanjing 210016,P.R.China;A New Algorithm for Set Operation of 2D Drawings[J];Journal of Nanjing University of Aeronautics & Astronautics;2001-01
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 ZHOU Gui-lian,ZHANG Di;Influence of electrode wire on machining surface roughness in high-speed wire cutting process[J];Manufacturing Automation;2009-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved