Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2005-01
Add to Favorite Get Latest Update

Design of the Progressive Die for the Rotor Core of the DC motor

YANG Xiao-guang (Guangdong Kinetek DeSheng(Shunde)Motor Co.,Ltd.,Shunde,Guangdong528308,China)  
The design of the progressive die for the rotor core of a type of DC motor is introduced.The design of the punch and matrix of the progressive die,the structure of the block lifting device,the structure of the stripping plate,and the technical requirements for the material and heat treatˉment of each component are stated in detail.
【CateGory Index】: TG386.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 1 Hits
1 JIA Zhi-xin1,CHEN Bo-jie2,FANG Ming-cai2,LI Hong-lin2,LI Jian-jun3,SONG Hong-jie4,YANG Jian4(1.Ningbo Institute of Technology,Zhejiang University,Ningbo,Zhejiang 315100,China;2.Faculty of Engineering,Ningbo University,Ningbo,Zhejiang 315211,China;3.State Key Laboratory of Material Processing and Die & Mould Technology,Huazhong University of Science & Technology,Wuhan,Hubei 430074,China;4.Ningbo Hongda Motor Die Co., Ltd,Ningbo,Zhejiang 315333,China);The influencing factors on the layout design of stator and rotor core of motors[J];Die & Mould Industry;2009-09
Chinese Journal Full-text Database 10 Hits
1 Zhou Mingjie(Guangdong Industry Technical College,Guangzhou 510300,China);DESIGN OF INJECTION MOLD FOR HANDLE SEAT OF CAMERA[J];Engineering Plastics Application;2008-07
2 Huang Guijian1,Wu Xiaoyu2,Liang Xiong1,Li Jibin2,Wu Haitang3 (1.College of Mechatronics and Control Engineering,Shenzhen University,Shenzhen 518060,China; 2.Shenzhen Key Laboratory of Advanced Mould Manufacturing Technology,Shenzhen University,Shenzhen 518060,China; 3.Dongguan Konka Mould Plastic Co. Ltd.,Dongguan 523685,China);DESIGN OF INJECTION MOULD WITH MECHANISM SET INSIDE CORE-PULLING SLIDE PREVENTING PLASTIC PARTS FROM ADHERING TO MOULD[J];Engineering Plastics Application;2009-05
3 HAN Qing - miao (Anyang University,Anyang 455000,China);Stamping Process and Design of the Die for a New Small Wheel[J];Journal of Anyang University;2003-02
4 Zhang Hao; Ruan Zhongyan (College of Mechanical Engineering and Applied Electronics Technology, Beijing Polytechnic University, Beijing 100022);Design for Multi-position Automatic Feeding Progressive Die of Easy-drawing Lids[J];Journal of Beijing Polytechnic University;2000-S1
5 LI Jin-gui;Surface Hardening Technologies and Mould Service Life[J];China Surface Engineerign;2002-01
6 Yu Wensheng1 Nie Lanqi2(1.Vehicle Engineering Department,Baotou Vocational & Technical College,Baotou Inner Mongolia 014030;2.Shandong Hongqi Electromechanical Ltd.Co.,Weifang Shandong 261031);Protecting and Lubricating Treatment of Stainless Steel under the Deep Drawing[J];Journal of Baotou Vocational & Technical College;2008-04
7 Yu Wenlin; Chen Zhixin; Chen Yeying;A Research of Improving Compression Strength of Retained Cap[J];PACKAGING ENGINEERING;1994-06
8 MA Zhu_da et al(Wenzhou Institute of Industry & Science Research);Study on Tabulate Aluminum foil-plastic-aluminum foil Automatic Blister Packaging Machine[J];Packaging and Food Machinery;2001-06
9 LONG Ling (Mechanical Department, Chengdu Textile College, Chengdu 610023);Establishment of Standard - Part Stamping Die Library under SolidWorks[J];Journal of Chengdu Textile College;2006-02
10 Xie Qingsong ; Hu Xingcai (The 712 Research Institute, CSIC, Wuhan 430064, China);Simple Drawing Mould Design of the Upper Cover[J];Marine Electric & Electric Technology;2003-05
Chinese Journal Full-text Database 1 Hits
1 OUYANG Bo_yi 1 ,CHENG Bai_liang 2 (1.Department of Electromechanic Engineering,Zhuzhou Professional Technology College,Zhuzhou,Hunan412001,China; 2.Department of Machine Manufacturing,Guangdong Province Technicist College,Huizhou,Guangdong516100,China);Design of the Progressive Die for the Automatic Tinertoy Blanking Piece of Motor Stator&Rotor[J];Die & Mould Industry;2006-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved