Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2008-01
Add to Favorite Get Latest Update

Selection and application of specialized mould steels for plastic forming

ZHANG Wen-yu,LIU Xian-lan(Department of Mechanical Engineering,Hunan Institute of Technology,Hengyang,Hunan 421002,China)  
The classification and properties of specialized mould steels for plastic forming were described in terms of the chemical composition,constituent structure,mechanical property and applications.It covers pre-hardened steel,free machining and pre-hardened steel and corrosion-resistant steel.The proper selection and use of the steels will help to improve the quality and extend the service life of moulds.
【CateGory Index】: TQ320.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 10 Hits
1 Yang Zhigang; Fang Hongsheng; Wang Jiajun; Chen xiuyun(Tsinghua University);INCLUSIONS IN A NOVEL BAINITIC FREE-CUTTING PLASTIC DIE STEEL[J];IRON AND STEEL;1994-12
2 Zhao Jiansheng;Qiao Xueliang;Sun Peizheug;Cui Kun(Huazhong University of Science and Technology, Wuhan 430074,PRC);The Machinability of a Prehardened Free-Cutting Plastic Mould Steel P20BSCa[J];MATERIALS FOR MECHANICAL ENGINEERING;1996-01
3 Sun Peizhen Qiao Xueliang Jiang Laizhu Cui Kun;The Behavior and Effect of Small Amounts of Calcium in Free-Cutting Prehardened Plastic Mould Steel[J];;1992-S1
4 Zhang Yaozong;Li Yanxiang;Li Yan;Wen Jiuba;Superplastic Forming and Strengthening of the New Type of PMS Plastic Die Steel[J];JOURNAL OF IRON AND STEEL RESEARCH;1996-03
5 CUI Kun(State Key Laboratory of Dies Technology,Huazhong University of Science and Technology,Wuhan Hubei 430074,China);Development of Die and Mould Steels at Home and Abroad[J];Heat Treatment of Metals;2007-01
6 Pan Zhenpeng (Department of Mechanical Engineering,Guangdong University of Technology,Guangzhou 510643) Feng Yingzhang (Die Materials Works,Guangzhou Guangzhong Enterprise Group Corp );Development and Application of Plastic Mould Materials[J];HEAT TREATMENT OF METALS;1999-01
7 ZhouJingen(SchoolofMaterialsScienceandEngineering,XianJiaotongUniversity,Xian710049) Z);SelectionandHeatTreatmentofDieMaterialsandServiceLifeofDies[J];HEAT TREATMENT OF METALS;1999-05
8 GAO Yu fang (Department of Mechanical Engineering,Qiqihar University);Study on Heat Treating Technology Parameters of Preliminary Hardening for 3Cr2Mo Plastics Die Steel[J];HOT WORKING TECHNOLOGY;2000-05
9 Zhao Jiansheng; Qiao Xueliang; Sun Peizheng ;Cui Kun;Alloying and Study on the Heat Treatment Procession of Plastic Mould Steel P20BSCa[J];HOT WORKING TECHNOLOGY;1995-01
10 SONG Ming, NI Ya-hui (Chengdu Higher Training School of Electric Mechanism, Chengdu 610000, China);Property and Selection of Mould Steel for Plastics[J];China Plastics Industry;2004-10
Chinese Journal Full-text Database 10 Hits
1 Qiao Xueliang(Dept of Mech.Eng.No.2,Huazhong University of Science and Technology Wuhan,Hubei 430074);Huang Qun;Zhao Jiansheng er al;EFFECTS OF CARBON CONTENT ON MICROSTRUCTURE AND PROPERTIES OF FREE CUTTING NON-HEAT-TREATED PLASTIC MOULD STEELS[J];ORDNANCE MATERIAL SCIENCE AND ENGINEERING;1994-05
2 LI Jin-gui;Surface Hardening Technologies and Mould Service Life[J];China Surface Engineerign;2002-01
3 JIANG Ning(Department of Mechanical & Electronic Engineering,Nanchong Vocational and Technical College,Nanchong 637000,China);Heat Treatment Technology in the Metal Die Making[J];Journal of Chongqing Institute of Technology(Natural Science Edition);2007-10
4 XI Guanglan, MA Qin(College of Materials Science and Engineering,Lanzhou University of Technology, Lanzhou 730050);The Research Situation and Development Prospect of Bainitic Steels[J];Materials Review;2006-04
5 LIU Jie,WANG De-jun(Hebi Vocational Technology College,Hebi 458030,China);Experimental Study on Manufacturing Technology for Cold Extrusion Moulds of Bearing Rings[J];Bearing;2007-02
6 Li Xiaosong,Cai Anhui,Chen hua (Hunan Institute of Science and Technology,Yueyang 414000,China);Effects of Different EDM Conditions on the Surface Residual Stress of Cr12MoV Steel[J];Electromachining & Mould;2009-01
7 Cao Chi1,2,Ma Ying1,Liu Hongjun1,Li Yuandong1(1.Lanzhou University of Technology,Lanzhou 730050,China;2.Changfeng Machine Factory,Lanzhou 730070,China);Introduction to Mould Polishing[J];Electromachining & Mould;2009-S1
8 LIU Shi-cheng, DAI Ya-kang, YU Li-jun, YU Shan-wei (Dept. of Material Science and Engineering Dalian Railway Institute, Dalian 116028, China) (Dalian Institute of Product Quality Super Vision Inspection, Dalian 116028, China);Analysis of Fracture Failure in a Number of Rin-shaping Dies of GCr15 Steel[J];Journal of Dalian Railway Institute;2000-04
9 Feng Yingzhang Pan Zhenpeng;Heat Treatment of Large-sized Steels for Plastic Moulds[J];Heavy Casting and Forging;2000-01
10 Feng Yingzhang Pan Zhenpeng;Progress in Materials for Plastic Mould in China[J];Heavy Casting and Forging;2001-04
China Proceedings of conference Full-text Database 2 Hits
1 WANG Qingfang WU Xiaochun Wu Tianrong (School of Material Science and Engineering,Shanghai University,Shanghai 200072,China);A STUDY OF LOW TEMPERATURE PLASMA ASSISTED BORIDING[A];[C];2008
2 Lu Guo Song Ren-guo The MOE Key Laboratory of Mechanical Manufacture and Automation,Zhejiang University of Technology,Hangzhou 310014,China Xu Su-zhen Eastern Liaoning College,Dandong 118000,China;Microstructure and High Temperature Wear Resistance of Plasma Sprayed Al_2O_3、Al_2O_3/TiO_2 Coatings on H13 Steel[A];[C];2008
Chinese Journal Full-text Database 10 Hits
1 Zhang Weiguo1, Li Shiguo2 , Li Hongyuan1 (1.School of Mechanical Engineering,Southern Yangtze University,Wuxi 214122, China; 2.School of Design,Southern Yangtze University,Wuxi 214000, China);ANALYSIS ON DEFECTS OF INJECTION CASE AND ITS STRUCTURAL DESIGN SOLUTION[J];Engineering Plastics Application;2007-01
2 CHEN Ping,LU Chun,YU Qi,LI Jun-yan(College of Chemical Engineering,Dalian University of Technology,Dalian 116012,China);Advance in study of interface of fiber reinforced thermoplastic composite[J];Materials Science and Technology;2007-05
3 Lü Haibo(Beijing Institute of Astronautical System Engineering,Beijing,100076);Residual Stress Analysis Model of Thermoplastic Reinforced Composite Materials in Filament Winding Process[J];Missiles and Space Vehicles;2007-05
4 LI Jun,MA Rui-wu,LIU Jie(School of Materials and Energy Engineering,Guangdong University of Technology, Guangzhou,Guangdong510643,China);Analysis of Common Defects in the Injection Molding Products and the Treatment Process[J];Die & Mould Industry;2006-03
5 WANG Wei,XIA Wei,LIAO Xiao-ping(School of Mechanical Engineering,Guangxi University,Nanning,Guangxi 530004,China);Research on BP neural network intelligent control of injection moulding product quality[J];Die & Mould Industry;2008-02
6 WANG De xi (Institute of Chemistry, Chinese Academy of Sciences, Beijing 100080,China);Characteristics of PPS and Its Applied Fields[J];Plastics;2002-02
7 YANG Feng-xia(Department of Chemical Engineering,Henan Vocation-Technical Teachers College,Xingxiang Henan 453003,China);Common Apparent Defects and Troubleshooting for Injection Moulded Products[J];Plastics;2003-06
8 Liu Donglei Sun Ling Xin Yong (Institute of Mechanical and Electrical Engineering,Nanchang University,Nanchang,Jiangxi,330029);Optimization of Injection Molding Parameters of Plastic Thin-Wall Parts[J];Modern Plastics Processing and Applications;2007-01
9 Xiong Jianwu Zhou Jin Chen Xiangshun (Department of Machine and Electricity Enginerring, Hunan Railway Professional-Technology College, Zhuzhou, Hunan ,412001);Design of Exhausting-slot of Injection Moldingtool[J];Modern Plastics Processing and Applications;2007-03
10 ZHAO He ming, ZHANG Ya, DONG Shao feng (North China Institute of Technology, Taiyuan 030051,China);The Study on the Data Processing Method for a Long Term Storage Accelerated Life Test of the Electronic Head Assembly of a Radio Fuze[J];JOURNAL OF DETECTION & CONTROL;1999-04
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Jiang Laizhu Wang Xishun Wang Jianhui (Shanghai Baosteel Research Institute);Development of Large sized Non quenched and tempered Banitic Steel for Plastic Mould[J];BAO STEEL TECHNOLOGY;1999-06
4 Sun Peizhen Zhao Jiansheng Chen Yuqiu Xie Changsheng (Huazhong University of Science & Technology) Pan Xiaoquan Du Ganaghua Qu Deqing (Daye Steel Works);DEVELOPMENT AND APPLICATION OF A NEW LOW ALLOY COLD DIE STEEL 6CrNiMnSiMoV(STEEL GD)WITH HIGH STRENGTH AND TOUGHNESS[J];Gangtie;1990-11
5 Jiang Laizhu Cui Kun (Huazhong University of Science & Technology);COMP. EX MASSIVE SULFIDE IN 5CrNiMnMoVSCa STEEL[J];Gangtie;1991-02
6 Sun Peizhen Qiao Xueliang Chen Yuqiu Cui Kun(Huazhong University of science & Technology)Du Guanghua Pan Xiaoquan Qu Deqing (Daye Steel works);DEVELOPMENT AND APPLICATION OF A NEW TYPE OF PREHARDENING PLASTIC-GUM DIE STEEL WITH S-Ca COMPLEX ALLOYING[J];Gangtie;1992-07
7 SONG Dongli,GU Jianfeng,HU Mingjuan,PAN Jiansheng(Key Laboratory of the Ministry of Education of High Temperature Mate rials and Testing, Shanghai Jiaotong University, Shanghai 200030);Design of New Quenching Technology for 718 Plastic Die Steel Based on Numerical Simulation[J];Iron and Steel;2004-09
8 Yang Zhigang; Fang Hongsheng; Wang Jiajun; Chen xiuyun(Tsinghua University);INCLUSIONS IN A NOVEL BAINITIC FREE-CUTTING PLASTIC DIE STEEL[J];IRON AND STEEL;1994-12
9 Zhao Jiansheng Sun Peizhen Cui Kun (Huazhong University of Science and Technology);The Research of a Steel (TG 2) Used for Ejector Pins of Plastic Dies[J];Materials For Mechanical Engineering;1990-02
10 CUI Kun (Huazhong University of Science and Technology, Wuhan 430074, China);Present Condition and Developing Direction of Die Steels in China[J];Materials For Mechanical Engineering;2001-01
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved