Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2012-01
Add to Favorite Get Latest Update

Pro/E-based secondary development of intelligent module for injection mould runner system

WEN Jing-song,CHEN Zhi-min,LIANG Yao-huan,JIANG Yi-li(National Engineering Research Center of Novel Equipment for Polymer Processing,South China University of Technology,Guangzhou,Guangdong 510640,China)  
The existing problems in Pro/E-based design of injection mould runner system were stated and a comprehensive solution for intelligent design of injection mould runner system was proposed.The knowledge type and processing method for design of runner system were summarized.The key technologies,intelligent selection and automatic assembly,and the ideas for implementing the process were investigated.An intelligent design module for runner system was developed by using Pro/Toolkit and Automation Gateway in Pro/E;and an intelligent design for an injection mould runner system was completed.
【CateGory Index】: TQ320.52
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 5 Hits
1 WANG Chang~1,YU Tong-min~2 (1.Mechanical Engineering School,UST Inner Mongolia,Baotou 014010,China;2.Institute of Mould & Die,Dalian University of Technology,Dalian 116024,China);Research of development for gate type selection expert system of plastic injection mould[J];Journal of Baotou University of Iron and Steel Technology;2003-04
2 XU Jian-wen,LIU Bin(Mould and Die Technology Research Center,Huaqiao University,Quanzhou,Fujian 362021,China);Moldflow-based optimization analysis of gating system for umbrella framework[J];Die & Mould Industry;2009-04
3 DONG Ding-qian(School of Mechanical and Electrical Engineering, Yancheng College of Textile Technology,Yancheng, Jiangsu 224005, China);Optimization of injection molding parameters and gates based on CAD/CAE technology[J];Die & Mould Industry;2010-03
4 SUI Xiu-mei,WANG Jing-yan(Changchun Vocational & Technical College,Changchun,Jilin 130033,China);Analysis on shrinkage and warpage of plastic molding products[J];Die & Mould Industry;2009-08
5 GU Zheng-chao,HU Shu-gen,HUANG Chang-lin,ZONG Ye\;(State Key Laboratory of CAD&CG, Zhejiang Uni., Hangzhou 310027, China);Research on integrated design techniques for injection mold[J];Journal of Zhejiang University(Engineering Science);2001-01
【Co-citations】
Chinese Journal Full-text Database 4 Hits
1 SUN Bao-fu (Department of Civil Engineering,Guilin Technology Institute,Guilin Guangxi,541004);The Conformation and Development of the Database for Feed System of the Injection Mould Based on the KBE[J];Journal of Donghua University(Natural Science);2006-05
2 Wang Hong-song,Pan Zhong-jian,Chen jun-yuan,Han Yan(JiuJiang vocational and Technical college,JiuJiang,Jiangxi,332000);Application of CAE in digital design of injection mold[J];Journal of Jiujiang Vocational and Technical College;2011-01
3 LU Jian-jun1,ZHAO Wei1,YUAN Guo-ding2(1.Changzhou Institute of Mechatronic Technology,Changzhou,Jiangsu 213164,China; 2.Jiangsu University,Zhenjiang,Jiangsu 212013,China);CAE-based optimal design of runner system of injection mould for automobile panel[J];Die & Mould Industry;2011-09
4 ZHOU Jian-an1,2(1.School of Mechanical and Electrical Engineering,Shenzhen Polytechnic,Shenzhen,Guangdong 518055,China;2.School of Mechanical and Automotive Engineering,South China University of Technology,Guangzhou,Guangdong 510641,China);Moldflow-based design of injection mould for two-color plastic part[J];Die & Mould Industry;2012-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Huang Jia Zheng Kai(Beijing Chemical Industry Research Institute 100084) (The National Engineering Plastics Engineering Technology Research Center, Beijing 100084);THE PRESENT SITUATION AND PROSPECT FOR THE DEVELOPMENT OF THE ENGINEERING PLASTICS INDUSTRY IN CHINA[J];Engineering Plastics Application;2000-12
2 XUXiao-xu 1 WUChong-feng 2 LI Xin 2(1.Dandong Textile College,Dandong118003,China;2.Tian jin Light Industry Institute,Tianjin300000,China);Pouring System CAD of Mould Plastic[J];Dandong Textile College;2002-02
3 JIANG Kai-yu, SUN Chuan-ting, YU Tong-min (Institute of Mould & Die of Dalian Univ. of Technol., Dalian 116023, China);Knowledge representation and derivation for injecting mould design[J];Journal of Dalian Institute of Light Industry;2003-04
4 ;APPLICAT ION OF MOLDFLOW(MPI/WARP) IN INJECTION MOULD[J];Plastics Manufacture;2008-08
5 REN Zhi-yu,SHI Yu-qing (Hangzhou Institute of Applied Engineering,Zhejiang Hangzhou 310012,China);Present and Development Tendency of Die CAD/CAM in Domestic-abroad[J];Mechanical & Electrical Engineering Magazine;2001-05
6 Yu Tongmin Liu Tieshan(Institute of Mold&Die,Dalian University of Technology,Dalian116024);Application of Intelligent Object-based Knowledge Processing Method in Expert System[J];Computer Engineering and Applications;2003-32
7 Shao Jian~ 1) Lu Zhen~ 2) Ke Yinglin~ 1) ~ 1) (Institute of Manufacturing Engineering, Zhejiang University, Hangzhou 310027) ~ 2) (City College, Zhejiang University, Hangzhou 310015);KBE-Based Mold Cavity Design System[J];Journal of Computer-Aided Design & Computer Graphics;2006-06
8 YANG Ning,LOU Zhen-liang,ZHOU Xiong-hui (National Die & Mold CAD Research Cent., Shanghai Jiaotong Univ., Shanghai 200030, China);Knowledge-based injection mold DFx system modeling[J];Computer Integrated Manufacturing Systems;2005-06
9 YU Tong min,LIU Tie san(Dalian University of Technology,Dalian 116024,China);Research on the key technology of the intellectualized design system for ejection mechanism of injection mold[J];Machinery Design & Manufacture;2004-02
10 DU Gang,LIU Dong xue,ZHANG Lei(Dalian University of Technology, Dalian 116012,China);Secondary development of AutoCAD based on ObjectARX and its application[J];Machinery Design & Manufacture;2004-03
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved