Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2016-01
Add to Favorite Get Latest Update

Study and analysis on the defects of bus skin based on strain distribution

LI Xiao-gang;LIU Li-xian;LI Chun-guang;CHEN Qing;ZHAO Ning;YANG Jian-wei;ZHAO Ai-min;Engineering Research Institute,University of Science and Technology Beijing;Application Technology Department,Research Institute of Technology;  
In the roll forming process of the bus skin,some bag-shaped wave and edge wave were produced on the central portion and the edge due to the strain was uneven distribution,and the causes and mechanism of defects covering skin were systematically analyzed.To solve the bag-shaped wave and edge wave,some technical measures were proposed such as appropriate adjustments to the rack from the pitch,roll gap and forming the bottom line clearance etc.to give a good effect.
【CateGory Index】: U463.8;TG306
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 ZHENG Yong-fu;XU Hong;YU Ting;GU Zheng-wei;ZHANG Mou-rui;LU Rui;Lǔ Meng-meng;School of Materials Science and Engineering, Jilin University;;Research of influence of die clearance on spring-back of longitudinal beam with complex cross-section for complex cross section[J];模具工业;2014-05
2 TIAN Zhi-cheng;LU Zhi-bin;FU san-ling;ZHU Qu-cai;School of Materials Science and Engineering, Hefei University of Technology;Rayhoo Motor Dies Co., Ltd.;;Forming optimization of automotive rear door based on compensation method of progressive clearance[J];模具工业;2013-09
3 WANG Xianjin RU Zheng MA Yanwei (University of Science and Technology Beijing);PRESENT OF AUTOMOTIVE SHEET PRODUCTION AND PROGRESS IN RESEARCH WORK IN CHINA[J];钢铁;1998-10
4 Li Diankui;Present Situation and Trend of the Steel for Modern Automotive Industry[J];上海钢研;1997-02
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 LI Xiao-gang;LIU Li-xian;LI Chun-guang;CHEN Qing;ZHAO Ning;YANG Jian-wei;ZHAO Ai-min;Engineering Research Institute,University of Science and Technology Beijing;Application Technology Department,Research Institute of Technology;;Study and analysis on the defects of bus skin based on strain distribution[J];模具工业;2016-01
2 CHANG Gui-jing;ZENG Bing-hua;JIANG Ming-jie;CHEN Shen-wu;Mold & Die Business Department,Chongqing Chang'an Automobile Co.,Ltd.;;Springback Prediction and Control in the Whole Process of Front Longitudinal Beam[J];精密成形工程;2015-04
3 YANG Ji-chun;YANG Chang-qiao;JIA Li-tao;School of Material and Metallurgy,Inner Mongolia University of Science and Technology;The First Steel Rolling Mill,Tangshan Iron and Steel Co,Ltd,Hebei Iron and Steel Group;;Effect of Rare Earth Element Ce on Impact Toughness of IF Steel[J];稀土;2014-03
4 CHEN Jun-jie,LIU Jian-hua,LIU Jian-fei,ZHUANG Chang-ling Research Institute of Metallurgical Engineering,University of Science and Technology Beijing,Beijing 100083,China;Inclusions in the surface layer of IF steel slab[J];北京科技大学学报;2011-S1
5 GUO Wen-yuan1,LI Jun2,MENG Qing-ge2 (1.Shanghai Baosteel Packaging Co.,Ltd.,Shanghai 201908,China;2.Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Effect of Annealing Process on Microstructure and Mechanical Property of IF Steel[J];热处理技术与装备;2011-04
6 GUO Wen-yuan1,LI Jun2,MENG Qing-ge2(1.Research and Development Dept,Shanghai Baosteel Packaging Co.,Ltd.,Shanghai 201908,China;2.Research Institute,Baoshan Iron & Steel Co.,Ltd.,Shanghai 201900,China);Rapid annealing of cold-rolled IF steel sheet[J];金属热处理;2011-08
7 ZHANG Ji-ming,SUN Wei-hua,SUN Hao(Technology Center of Jinan Iron and Steel Group Corporation,Ji′nan 250101,Shandong,China);Study on Mechanical Properties and Microstructure of Fe-Mn-Si-Al Steels[J];钢铁;2010-04
8 CUI Heng,YUE Feng,BAO Yan-ping,WANG Min,WU Wei-shuang(Engineering Research Institute,University of Science and Technology Beijing,Beijing 100083,China);Study on Cleanliness of IF Steel First Slab[J];钢铁;2010-03
9 Zhou Xiaofen Xiong Ronggang Fu Renyu Li Lin(School of Materials Science and Engineering,Shanghai University);STUDY ON MICROSTRUCTURE AND PROPERTY OF TWIP STEEL AFTER WELDING[J];上海金属;2008-03
10 JIANG Hai-tao,MI Zhen-li,TANG Di,WANG Hai-quan,DAI Yong-juan(National Engineering Research Center for Advanced RollingTechnology,University of Science and Technology Beijing,Beijing 100083,China);In-situ Observation of Microstructure in TWIP Steel During Tensile Deformation[J];材料工程;2008-01
【Secondary Citations】
Chinese Journal Full-text Database 8 Hits
1 ZHU Qu-cai1,YAN Jian-ming1,FU San-ling2,ZHANG Hai-bo2(1.School of Materials Science and Engineering,Hefei University of Technology,Hefei,Anhui 230009,China;2.FuJi RayHoo E G.INC.Wuhu,Anhui 241009,China);A new side driving and pressing on material mechanism[J];模具工业;2012-08
2 QIAN Ling-yun,LIU Quan-kun,LI Heng,Hang yu,WANG Wan-lu(School of Materials Science and Engineering,Hefei University of Technology,Hefei, Anhui 230009,China);Current research status and progress in improving the strength of cold extrusion female die[J];模具工业;2011-09
3 LI Yong,ZHU Yun,WANG Chen,CAO Xu-Jun,ZHOU Lan(Chengfei Integration Technology Corp.Ltd.,Chengdu,Sichuan 610091,China);Die with fast exchanging structure for manufacture of automotive roof panel with or without top window[J];模具工业;2011-01
4 ZHU Yuan-you(Anhui Jianghuai Automobile Co.,Ltd,Hefei,Anhui 230022,China);Design of large piercing die for multi-hole and medium plate part[J];模具工业;2010-06
5 YANG Xiang-an1,2 RUAN Feng1(1.South China University of Technology,Guangzhou 510640 China)(2.Guangdong Polytechnic Normal University,Guangzhou 510643 China);Analysis on springback compensation direction for die-face adjustment[J];塑性工程学报;2010-02
6 GU Zheng-wei,ZHAO Li-hui,XU Hong,ZHANG Zhi-qiang(Jilin University,Changchun,Jilin 130022,China);Numerical analysis on defects in forming side upright column of railway vehicle[J];模具工业;2009-06
7 LAN Feng-chong,WANG Yu-chao,CHEN Ji-qing(School of Auto Engineering,South China University of Technology,Guangzhou 510640,China);Advances in sheet metal forming simulation of automotive body[J];计算机集成制造系统;2007-08
8 GAO Jin-zhang1,LIU Wei1,JIA Li-li2,ZHENG Yong1(1.Department of Materials Science and Engineering,Southeast University,Nanjing,Jiangsu 210096,China;2.Department of Materials Science and Engineering,Nanjing Institute of Technology,Nanjing,Jiangsu 210013,China);Simulation of extrusion process and die design for aluminum multi-cavity wallboard profile[J];模具工业;2007-02
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved