Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Die & Mould Industry》 2017-01
Add to Favorite Get Latest Update

Application of switch wedge with/without side piercing in stamping die

LIU Chun-yu;ZHENG Wei;Technology Center,Anhui Jianghuai Automobile Co.,Ltd.;  
The application of a switch wedge with/without side piercing in the stamping die for instrument panel support was presented. By analyzing the stamping process of instrument panel support and the die structure, a pneumatic side piercing switch mechanism was used to realize the two situations of instrument panel support with/without side piercing in a die. It focused on the structure of the switching mechanism and working principle.
【Fund】: 国家科技重大专项项目(2014ZX04002041)
【CateGory Index】: TG385.2
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 2 Hits
1 SHEN Yan-jin;LI Jie;Hunan Automotive Engineering Vocational College;Guilin Electrical Equipment Scientific Research Institute Co., Ltd.;;Design of trimming and piercing die for car left /right corner reinforcing plate[J];模具工业;2015-11
2 XIANG Xiong-fang(Department of Materials Science and Engineering, Hubei University of Automotive Technology, Shiyan, Hubei 442002, China);Design of flanging and sizing die for automobile body parts[J];模具工业;2009-02
【Co-citations】
Chinese Journal Full-text Database 8 Hits
1 LI Xue-qin;TAO Shan-hu;School of Mechanical and Automotive Engineering, Hefei University of Technology;Hefei Automotive Forgings Limited Liability Company;;Research on forming process of arc sheet-metal[J];模具工业;2015-06
2 WANG Jin-lu;SHI Peng-fei;Automotive Engineering Technical Center of Hebei Province,Great Wall Motor Company;;Structure of pressing block with a buffer[J];模具工业;2015-04
3 ;The Door Cover Assembly Method of Flush Debugging[J];模具制造;2014-05
4 LIU Long-fen;CHEN Ke;CEN Kai;YAN Qing-yu;Sichuan Push Die & Mold Co.,Ltd.;;Design of sizing and flanging composite die technology for vehicle body B-type column[J];模具工业;2014-04
5 CHEN Shi-tao,RUAN Lin-fan,ZHAO Huai-bei(Technology Center,Anhui Jianghuai Automobile Co.,Ltd.,Hefei 230601,China);Design of automotive roof flanging-sizing mold with pneumatic switching mechanism[J];锻压技术;2013-04
6 ZHAO Xue-qin1,CAO Xu-jun2(1.Chengdu Technological University,Chengdu,Sichuan 611730,China;2.Sichuan Chengfei Integration Technology Co.,Ltd.,Chengdu,Sichuan 610091,China);Compound cam driver of flanging and restriking for car fender[J];模具工业;2013-07
7 TANG Dong-sheng,CHENG Guo-zhong,LIN Hua-sheng(Chery Automobile Co.,Ltd,Wuhu,Anhui 241009,China);Defects in technological design for forming automotive part and corresponding improvement[J];模具工业;2011-02
8 TANG Dong-sheng(Chery Automobile Co.,Ltd,Wuhu,Anhui 241009,China);Predicting method of automotive die sizes[J];模具工业;2011-01
【Secondary Citations】
Chinese Journal Full-text Database 3 Hits
1 ZHOU Mei-rong1,SHEN Yan-jin2 Yongzhou Vocational-Technical College,Yongzhou,Hunan 425000,China; 2.Zhuzhou Professional Technology College,Zhuzhou,Hunan 412001,China);Stamping process and design of die for JBSAN cover plate[J];模具工业;2011-06
2 SHEN Yan-jin(Department of Mechanical Engineering,Zhuzhou Professional Technology College,Zhuzhou,Hunan 412001,China);Development of multi-position progressive die for spring caliper[J];模具工业;2008-03
3 HU Fang-ge (Guangzhou Honda Automobile Co.Ltd,Guangzhou,Guangdong510700,China);Design Specification of the Mechanics of Flanging and Restriking Die for Automobile Body Metal Sheets[J];模具工业;2005-09
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved