Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Coal Science and Technology》 2014-12
Add to Favorite Get Latest Update

Optimization on Dynamic Performance of Mining Dumper Frame

HUO Jun-jie;Shenhua Beidian Victory Energy Co. ,Ltd.;  
In order to solve the problems existed small structure strength and large mass of mine dumper frame,the dynamic performance optimization of mine dumper frame structure were realized. Firstly,parametric models of the frame structure were built by using the APLD language of the ANSYS software,the crucial natural frequency,which was the key factor to influence dynamic performance of frame,were determined by modal analysis. Then,considering frame weight as the objective function,the static strength of frame,transient response and crucial natural frequency as the constraint conditions,the sensitivity analysis of all structure parameters were performed to determine the design variables of frame dynamic optimization. Finally,the first order method were used to optimize the dynamic performance of frame by taking the frame crucial natural frequency as the objective function. The results showed that the optimization could improve the static and dynamic performance of frame,and reduce frame weight which improved the economic efficiency of mine dumper transport.
【CateGory Index】: TD57
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
Chinese Journal Full-text Database 6 Hits
1 TU Yi-qiang, JIANG Ke-bin, HU Ye-ping, ZHAI Ke-wei (Engineering Institute of Engineering Corps, PLA Univ. of Sci. & Tech., Nanjing 210007, China);Analyzing Sensitivity of Structure Response Based on SFEM[J];Journal of PLA University of Science and Technology(Natural Science);2001-02
2 Zhang Hongwei1 Zhang Yidu1 Wang Xiping2 Zhou Shenjie2(1.Beihang University 2.Shandong University);Optimization Design of an Agricultural Vehicle Frame Based on ANSYS Parametric Modeling[J];Transactions of the Chinese Society for Agricultural Machinery;2007-03
3 Yang Jun Ye Yongliang;The Key Technology of the Body Design of Vehicle[J];Shanghai Auto;2008-05
4 WANG Xue-wen YANG Zhao-jian Duan Lei (Mechanical Engineering College,Taiyuan University of Technology, Taiyuan 030024 China);About some optimization design problems of ANSYS[J];Journal of Plasticity Engineering;2007-06
5 YE Qin1,DENG Ya-dong1,WANG Yan2,TAN Wei2(1.School of Automotive Engineering,Wuhan University of Technology,Wuhan 430070,China;2.Dongfeng Automobile Co Ltd,Wuhan 430056,China);Finite Element Analysis and Optimization of a Light Vehicle Frame[J];Journal of Wuhan University of Technology;2008-02
6 Jiang Libiao Liu Jianxiong Cheng Cheng South China University of Technology,Guangzhou,510640;Optimization Design of Mining Dump Truck Steering Mechanism Based on Orthogonal Test[J];China Mechanical Engineering;2013-15
Chinese Journal Full-text Database 10 Hits
1 ZHANG Hai-tao1,GAO Hong1,ZHA Wei-min2,MENG Shu2(1.Anhui Key Laboratory of Advanced Numerical Control & Servo Technology, Anhui Ploytechnic University,Wuhu 241000,China; 2.Wuhu Bureau of Quality and Technical Supervision,Wuhu 241000,China);Dynamics simulation and analysis of half-vehicle model's active suspension with LQG controller[J];Journal of Anhui Polytechnic University;2012-01
2 WANG Ai-guo1,2,QIN Wei-hua1(1.College of Mechanical and Automobile Engineering,Hefei University of Technology,Hefei 230009,China;2.Anhui Technical College of Mechanical and Electrical Engineering,Wuhu 241000,China);Research on the Control of Automobile Active Suspension Based on the Multi-body Model[J];Journal of Anhui Science and Technology University;2011-02
3 MA Bing-jie, FENG Hui-hua, LIAO Ri-dong, YAO Li-min (School of Mechanical & Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Modal Analysis of Engine Structure Based on the Modal Correlation and Model Modification[J];Vehicle & Power Technology;2006-02
4 MING Qiao-hong,PAN Qing-qing,ZHONG Shao-hua(Automotive Engineering Institute of Wuhan University of Technology,Wuhan 430070,China);Finite Element Analysis of Steering Column Assembly for A Mini-van[J];Vehicle & Power Technology;2008-04
5 ZENG Wei-ying1,FU Yan-rong1,WANG Guo-ye1,2(1.Vehicular Engineering Department,China Agricultural University,Beijing 100083,China;2.School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Simulation Study on ESP Control Principle of off-road Vehicle[J];Vehicle & Power Technology;2009-02
6 LIANG Xin-cheng,ZHANG Jun,DAI Xin,ZHOU Feng-jun (National Engineering Laboratory for Electric Vehicle,Beijing Institute of Technology,Beijing 100081,China);Study on Simulation and Test for a Seven DOF Model of a Mini Car[J];Vehicle & Power Technology;2010-02
7 SONG Hai-jun1,ZHANG Ji-ping1,LIU Xi-xia1,KONG Fang2 (1.Department of Mechanical Engineering,Academy of Armored Force Engineering,Beijing 100072,China; 2.Patent Examination Cooperation Center of SIPO,Beijing 100190,China);Research on the Whole Steering Control System of Three-axle Vehicle[J];Vehicle & Power Technology;2011-01
8 LIU Zhi-qiang,LIAN Fei,MAO Jun-jie,LV Xue(School of Traffic and Automobile Engineering,Jiangsu University,Zhenjiang 212013,China);Research on Vehicle Stability in Driver-vehicle-road Closed-loop system[J];Vehicle & Power Technology;2012-02
9 WU Jun-qing(North University of China, Taiyuan, Shanxi 030051, China);Experiment and Calculation of Vibration Modal of a Military Engine[J];Acta Armamentarii;2005-04
10 WU Yun-peng,GUAN Ji-fu,GU Liang(School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Adaptive Predictive Control of Vehicle Semi-Active Suspension[J];Acta Armamentarii;2011-02
China Proceedings of conference Full-text Database 10 Hits
1 He Yan,Zhang Xiaoyan,Li Haibin,Liu Keyuan,Liu Zhibin,Duan Zhixin College of Science,Inner Mongolia University of Technology,Hohhot 010051,P.R.China;Dynamics Modeling and Simulation for Tracked Vehicles[A];[C];2008
2 ;The Braking Stability Analysis of A Light Truck[A];[C];2009
3 ;基于ADAMS的某轻型卡车操纵稳定性分析[A];[C];2009
4 ;Study on Quasi-Flexible Body Discretization Modeling Method Based on Bushing[A];[C];2009
5 ZHU Shi-xing,WANG Hai-jun,WANG Peng (College of Aeronautical engineering,Civil Aviation University of China,Tianjin 300300,China);Co-simulation of magnetorheological semi-active suspension based on ADAMS & SIMULINK[A];[C];2010
6 ;Coupled Vibration Isolation of the Vehicle Engine[A];[C];2006
7 Li Jiazhu Chen Jian Chen Xinzhao;Modeling and Simulation of Full Vehicle Based on AMEsim[A];[C];2008
8 ;电动汽车电机驱动系统悬置设计[A];[C];2012
9 Zhou Yan~1,Zhang Lijun~2 1.Sino-German School for Postgraduate Studies(CDHK),Tongji University,Shanghai,200092 2.College of Automotive Studies,Tongji University,Shanghai,201804;Impact of Nonlinear Suspension System on Ride Comfort based on 2-DOF-Suspension-Model[A];[C];2013
10 Wang Haidong SAIC-GM-Wuling Automobile Co.,Ltd.,Liuzhou,545007;Damper Tuning In Vehicle Dynamics Development[A];[C];2013
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 LIAO Ri-dong ,WANG Jian ,ZUO Zheng-xing ,FENG Hui-hua (School of Mechanical and Vehicular Engineering,Beijing Institute of Technology,Beijing 100081,China);Application of Finite Element Analysis of Heavy Vehicle Frames[J];Vehicle & Power Technology;2006-02
2 GAO Yaodong,YANG Jianming,WANG Jianxin(Mechanical Engineering School,UIST Baotou,Baotou 014010,China);Applications of ANSYS's submodels technique[J];Journal of Baotou University of Iron and Steel Technology;2002-04
3 LU Cong-hong, LIN Yan, JI Zhuo-shang, GU Chang-jiang, CHENG Cao-hong, LI Yu-gang (Ship CAD Eng.Cent.,Dalian Univ.of Technol.,Dalian 116024, China);Study on ANSYS FE Modelling Method of Ship-Hull Surface[J];Journal of Ship Mechanics;2003-05
4 Nanchang University Huang Yingyong Xin Yong Yang Guotai;Influence of mesh generation method on injection molding simulation[J];Forging & Stamping Technology;2002-06
5 GUO Yong-qiang+1, LIU Yan-hai+1, XU Meng+2(1.School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China;2.Shangqiu Yudong Reconnaissance and Design Ltd. Co., Shangqiu 476000, China);Influence of Different Elements on Suspension Bridge Analysis[J];Journal of Gansu Sciences;2005-01
6 MA Shao-kun, YU Miao, CUI Hao-dong (College of Civil and Architectural Engineering, Guangxi University, Nanning 530004, China);The basic principle of substructure analysis and the technique of substructure analysis with the software of ANSYS[J];Journal of Guangxi University(Natural Science Edition);2004-02
7 WANG Feng-li,SONG Ji-liang,TAN Guang-yu,LIU Mei-juan (Mechanical & Power Engineering College,Harbin Univ. Sci. Tech.,Harbin 150080,China);Creating of Complex Finite Element Model in the ANSYS[J];Journal of Harbin University of Science and Technology;2003-03
8 HU Chun-yan,WANG Yong-qin,SHEN Shou-rong,YAN Xing-chun(National Laboratory of Mechanical Transmission,Chongqing University,Chongqing 400044,P.R.China);Parametric Design of E·P Based on ANSYS[J];Journal of Chongqing Architecture University;2005-05
9 WANG Ming-qiang,ZHU Yong-men,LU Wen-xin (Eastchina Shipbuilding Engineering,Institute Zhenjiang 212003,China);The research on finite element mesh generation method[J];Machinery Design & Manufacture;2004-01
10 LIU Qi-mao (Guangxi Institute of Technology,Liuzhou 545006,China);Structure optimization design for the automotive frame[J];Machinery Design & Manufacture;2005-04
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved