Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Coal Science and Technology》 2017-09
Add to Favorite Get Latest Update

Study on rib spalling characteristics of 8.5 m height fully mechanized mining face

DI Shuai;WANG Jiren;SONG Guijun;Mining Institute,Liaoning Technical University;Shenhua Shendong Coal Group Corporation Ltd.;  
In order to solve rib spalling problem of 8. 5 m height fully mechanized face,main influence factors and characteristics of No.12401 working face in Shangwan Coal Mine were studied through theoretical analysis,empirical regression analysis and numerical simulation methods.Plastic zone width formula was established based on D-P criteria modified by the Lord parameter. The rib spalling depth was determined by regression analysis based on mining height and plastic zone width. The results showed that in Shendong Mining Area,main influence factors of rib spalling were bearing pressure,mining height,periodic weighting and mining depth. The main failure form of No.12401 working face was shear failure type. For the working face,plastic zone width was 9.87 m,instable position was from 2.98 m to 3.59 m to roof,the rib spalling depth was from 2.85 m to 3.45 m.The comprehensive analysis through the modified calculation formula of the plastic zone width,theoretical analysis,regression analysis can improve the reliability on the depth of coal wall spalling. These results can provide the basis for the design of the hydraulic support and selecting appropriate measures to prevent this phenomenon.
【Fund】: 国家自然科学基金资助项目(51574143)
【CateGory Index】: TD323
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved