Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Nantong University(Natural Science Edition)》 2013-04
Add to Favorite Get Latest Update

Analysis on Energy Consumption of Injection Molding Machines Based on Two Different Hydraulic Circuits

SUN Miao;ZHANG Wei;JIAO Yu-quan;GAO Jun;LI Jian;XI Guan-nan;School of Mechanical Engineering,Nantong University;Department of Mechanical and Electronics,Nantong Agricultural Vocational Technology College;  
The differences between domestic conventional hydraulic circuit system and foreign new hydraulic servo system was analyzed,and the energy saving feature of foreign new hydraulic servo system was explored.New hydraulic servo system realized the energy-saving by eliminating the energy consumption when the system wasn't working and reducing the energy consumption when the system was working.The theoretical analysis result was verified by manufacturing two kinds of plastic products on injection molding machine with both hydraulic system above.The results shows that foreign new hydraulic saves 50% energy more than domestic conventional hydraulic system,and the reduced energy consumption is significant.
【Fund】: 江苏省科技支撑计划项目(BE2011116);; 南通市传热强化与过程节能重点实验室项目(CP12012004);; 南通大学研究生科技创新计划项目(YKC12060)
【CateGory Index】: TQ320.5
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 7 Hits
1 Lin Kewei Xu Kaijie Zhou Caigen(Zhejiang Industry Polytechnic College,Shaoxing312000,China)(Shandong Plastics R&D Center,Jinan250002,China) (Zhejiang Kaida Machine Tool Co.Ltd,Shaoxing312041,China);CURRENT SITUATION ANALYSIS OF ENERGY SAVING TECHNOLOGY OF INJECTION MOLDING MACHINE HYDRAULIC SYSTEM[J];Engineering Plastics Application;2011-08
2 ZHOU Fu-hong(Emerson Network Power Co.Ltd.,Shenzhen 518057,China);Reforming project of energy-saving in plastics injection machine by using the converter[J];Electric Drive Automation;2006-05
3 PENG Genyun1,YUAN Yinnan1,TAO Jianfeng2,XI Guannan1 (1.School of Mechanical Engineering,Nantong University,Nantong Jiangsu 226019,China; 2.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Modeling and Simulation of Pump-valve Combined Control Scheme for Upper Hydraulic Cylinder of Press[J];Machine Tool & Hydraulics;2011-13
4 LI Qing-hong,WU Long(School of Physics and Mechanical & Electrical Engineering,Sanming University,Sanming 365000,China);Design of Hydraulic Control System for Injection Molding Machine Based on PLC[J];Journal of Nantong University(Natural Science Edition);2011-04
5 ZHANG Tao,LI Bin-li,LI Zi-yu(Guangdong Yizumi Precision Machinery Co.,Ltd,Shunde528306,China);Research on Energy-Saving Technology of Plastics Injection Molding Machine Driven by Servo Motor-Driven Hydraulic Pump[J];Mechanical & Electrical Engineering Technology;2010-08
6 ZHANG You-gen (Ningbo Haihang Plastic Machinery Manufacture Co., Ltd., Ningbo 315806, China);Analysis and Study on Application of Energy-saving Hydraulic Pressure Motive Force Drive System of Injection Molding Machine[J];Hydraulics Pneumatics & Seals;2008-03
7 XI Guan-nan1,PENG Gen-yun1,YAN Guo-yi2,TAO Jian-feng3,YUAN Yin-nan1;Open-loop experiment research of universal hydraulic press controlled by proportional variable pump[J];Chinese Hydraulics & Pneumatics;2011-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Lin Kewei Xu Kaijie Zhou Caigen(Zhejiang Industry Polytechnic College,Shaoxing312000,China)(Shandong Plastics R&D Center,Jinan250002,China) (Zhejiang Kaida Machine Tool Co.Ltd,Shaoxing312041,China);CURRENT SITUATION ANALYSIS OF ENERGY SAVING TECHNOLOGY OF INJECTION MOLDING MACHINE HYDRAULIC SYSTEM[J];Engineering Plastics Application;2011-08
2 ZHANG You-gen(Ningbo Haida Plastic Machinery Co.Ltd.,Ningbo 315200,China);Analysis and Research of the Scientific Development for Our Country PET Bottle Molding Equipment(Ⅳ)[J];Packaging and Food Machinery;2010-03
3 AI Chao;KONG Xiang-dong;LIU Sheng-kai;WANG Guang-ping;Key laboratory of Advanced Forging &Stamping Technology and Science(Yanshan University),Ministry of Education of China;Hebei Provincial Key Laboratory of Heavy Machinery Fluid Power Transmission and Control,Yanshan University;School of Mechanical Engineering,Yanshan University;;Research of pressure-relief characteristics of pump-controlled press based on the weakest noise intensity[J];Forging & Stamping Technology;2013-06
4 She Kuanghua;Tao Zhengang;Liao Qiuhui;Shanghai University of Engineering Science;;Research and Application of Energy-Saving Technology for Injection Molding Machine[J];Engineering Plastics Application;2013-11
5 ZHANG Xuyan;LIU Ruiqing;Lanzhou Petrochemical College of Vocational Technology;Bohai Equipment Lanzhou Petrochemical Machinery;;Analysis of energy-saving application of the valve-less hydraulic system in injection molding machine[J];Industrial Instrumentation & Automation;2014-02
6 Feng Gang;Zhang Chaoge;Jiang Ping;Zhejiang Industry Polytechnic College;Zhejiang Zhoushan Polytechnic College;;Research Status and Prospect of Energy-Saving Injection Molding Machine Driving System[J];Engineering Plastics Application;2014-03
7 WU Hong1,ZHOU Jiping2 (1.Yangzhou Polytechnic College,Yangzhou Jiangsu 225009,China;2.Yangzhou University,Yangzhou Jiangsu 225009,China);A Probe into the Hydraulic Driving Mode of Small-scale Injection Molding Machine[J];Machine Tool & Hydraulics;2009-12
8 ZHANG You-gen;Analysis and Forecast of Enengy Saving Technology of Hydraulic System in Large Injection Molding Machine[J];Fluid Power Transmission & Control;2009-01
9 REN Ji-guo,WANG Gang-ming,YU Guo-qiang,REN Rui,LI Guo-ping(Faculty of Mechanical Engineering and Mechanics,Ningbo University,Ningbo 315211,China);Energy-saving Control Techniques for Injection Molding Machine Based on Single Chip Microcomputer[J];Journal of Ningbo University(Natural Science & Engineering Edition);2009-04
10 Gao Jun Yan Guoyi Peng Genyun Sun Miao Xi Guannan;Simulation of Power Metallurgic Forming Machine Based on the Iterative Learning Control Strategy[J];Fluid Power Transmission & Control;2013-01
China Proceedings of conference Full-text Database 1 Hits
1 Zhang You-gen (Ningbo Haida Plastic Machinery CO.,Ltd,Ningbo 315200,China);Analysis and Research of the Scientific Development for Our Country PET Bottle Molding Equipment[A];[C];2010
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Zhang yougen (Ningbo Haihang Plastic Engine Manufacture Co. Ltd.,Ningbo 315801,China);ELECTRIC INJECTION MOLDING MACHINE AND HYDRAULIC INJECTION MOLDING MACHINE CREATING TOGETHER THE NEW DEVELOPMENT OF INJECTION MOLDING MACHINE[J];Engineering Plastics Application;2006-06
2 Qi Haitao Fu Yongling Wang Zhanlin(School of Automation Science and Electrical Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Scheme analysis of pump-valve coordinated control electro-hydrostatic actuator[J];Journal of Beijing University of Aeronautics and Astronautics;2008-02
3 Zhang Yougen;Application of Frequency Variable Adjusting Speed Technology in the Plastics Injection Molding Machine[J];The World of Inverters;2005-06
4 HU Jiang-feng,WU Xiao-yi,ZHAO Zhe,FAN Ji (Northwest Institute of Mechanical and Electrical Engineering,Xianyang 712099,China);Design of a Real-Time Digital Testing System Based on the xPC Target[J];Measurement & Control Technology;2009-02
5 Liu Bo et al;Optimal design of hydraulic system for plastic injection moulding machine[J];Machine Tool & Hydraulics;2001-01
6 JI Youzhe,QIU Lihua,WAND Zhanlin(School of Automation Science and Electrical Engineering,Beijing University of Aeronautics and Astronautics,Beijing 100083,China);Research on Variable Pressure Control of Pump and Valve Combined Scheme of Electrical Hydrostaic Actuator[J];Machine Tool & Hydraulics;2008-01
7 PENG Genyun1,YUAN Yinnan1,TAO Jianfeng2,XI Guannan1 (1.School of Mechanical Engineering,Nantong University,Nantong Jiangsu 226019,China; 2.School of Mechanical Engineering,Shanghai Jiaotong University,Shanghai 200240,China);Modeling and Simulation of Pump-valve Combined Control Scheme for Upper Hydraulic Cylinder of Press[J];Machine Tool & Hydraulics;2011-13
8 ;Develop I/O Driver in xPC Target[J];Mechatronics;2008-04
9 WEI Xiao-qing1,WU Xu-guang1,BAI Xiao-juan1,HAO Fang2,ZHANG Wei1;The design and realization of graphical interface for mould plastics machine’s embedded control system[J];Manufacturing Automation;2011-16
10 LIN Rong-chuan(Engineering College of Jimeiuniversity,Xiamen 361012,P.R.China);Research and Performance Analysis of Energy-saving Technology for Injection Molding Machines[J];Science Technology and Engineering;2010-10
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved