Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Transactions of the Chinese Society for Agricultural Machinery》 2015-03
Add to Favorite Get Latest Update

Wear Research and Improved Design of D-knotter Wiper Mechanism

Li Haitao;Xiong Ya;Chen Longjian;Zhang Shaoying;Li Xue;Han Lujia;College of Engineering,China Agricultural University;  
In order to solve the serious wear problem of D-knotter wiper inner cam,firstly,a new structure cam was designed. To be more precise,the original cylinder cam contour was replaced by using the offset arc surfaces of the cam theoretical surfaces,which means the point contact manner of convexityconvexity and convexity-plane was substituted by convexity-concave. Secondly,the surface equations of the improved cam were obtained,and then the pressure angle,initial contact area,initial maximum contact stress were calculated. Thirdly,the original and improved cams were manufactured by the turning and milling machine,which were using the aluminum alloy materials. Finally,a contrast experiment of wear pattern between the original and improved cams was designed,and the results were given by quantitative analysis. The results indicated that the improved cam mechanism reduced the pressure angle by an average of 25% than the original one in the majority of the rise travel. In contrast to the original one,the improved cam mechanism's initial contact area can increase by approximately 50% and the initial maximum contact pressure decreased by 38%. After 10 hours' runs of each cam mechanisms,the improved cam exceeds the original one by 31. 7% in case of the width of the wear trace,and the abrasion value of improved cam is about 50% smaller than the original cam.
【Fund】: 长江学者和创新团队发展计划资助项目(IRT1293);; 中央高校基本科研业务费专项资金资助项目(2014YJ007)
【CateGory Index】: S817.115
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Citations】
Chinese Journal Full-text Database 4 Hits
1 GAO Zhong-yong,XU Wu-bin,GAO Shang-han (Dept. of Mechanical Eng., Guangxi University of Technology, Liuzhou 54 5006,China);Simplification and application of stress formula during the contact of two elliptic balls[J];Machine Design;2003-06
2 Li Hui 1,Li Hongwen 1,He Jin 1,Wang Qingjie 1,Wu Hongdan 1,He Qing 2(1.College of Engineering,China Agricultural University,Beijing 100083,China 2.Collaboration Center,State Intellectual Property Office,Beijing 100190,China);Reconstruction and optimal design of driving dentate disc of D-bale knotter based on reverse engineering[J];Transactions of the Chinese Society of Agricultural Engineering;2010-05
3 Yin Jianjun Li Shuang Li Yaoming(Key Laboratory of Modern Agricultural Equipment and Technology,Ministry of Education and Jiangsu Province,Jiangsu University,Zhenjiang 212013,China);Kinematic Simulation and Time Series Analysis of D-knotter and Its Ancillary Mechanisms[J];Transactions of the Chinese Society for Agricultural Machinery;2011-06
4 Xiong Ya;Li Haitao;Zhang Shaoying;Chen Longjian;Li Xue;Han Lujia;College of Engineering,China Agricultural University;;Motion Laws and Design Basis of the Knotter Wiper Mechanism[J];Journal of Agricultural Mechanization Research;2015-07
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Dong Shijie Lu Zhongjin Mao Zhiyuan;The Study of Erosion Behaviors of High Manganese Steel Under High Velocity Impacting of Alundum Particles[J];Journal of Hubei Automotive Industries Institute;1995-02
2 WANG Zaizhou,ZHANG Chunxiang,ZHENG Shuzhi,WANG Zhongliang(Hebei Normal University,Shijiazhuang Hebei 050031,China);Modeling and Simulation Research of Bionic Concave Non-smooth Surface[J];Machine Tool & Hydraulics;2011-01
3 WANG Bao-zhong 1,JIA Xiao-ming 1,ZHAO Wei 2(1.Machinery Department, Hebei Institute of Technology, Tangshan 063009, China; 2.Tangshan Steel and Iron Co. Tangshan 063009, China);Study on Abrasion Mechanism of Coal Water Mixture Sprager[J];Clean Coal Technonlogy;2002-03
4 WU Yuping, LI Huiqi, LI Min (Shandong University of Science and Technology,?Shandong Tai'an 271019,?China);Solute Distribution and Phase Structure of Electroless Ni—P Alloy Layer by Plasma Remelting[J];Transactions of Metal Heat Treatment;2001-02
5 REN Xiang-hong1,2,ZHU Jin-hua1,LI Yong-sheng3,CHEN Ru3(1.State Key Laboratory for Mechanical Behavior of Materials,Xi'an Jiaotong University,Xi'an 710049,China;2.Xi'an Research Institute of High-tech,Xi'an 710025,China;3.Tianshui Pneumatic Machinery Co Ltd,Tianshui 741020,China);Behavior of retained austenite in three carburized steels under impact wear load[J];Transactions of Materials and Heat Treatment;2008-06
6 HUANG Jian hong (Inner Mongolia Research Institute of Agricultural Machinery,Hohhot 010020,China);Hardness Design of Anti-Wear Components in Agricultural Machinery[J];Heat Treatment of Metals;2001-07
7 WEI Yu-ping,CHEN Yong(Guangxi Technological College of Machinery and Electricity,Nanning Guangxi 530007,China);Failure Analysis of the Forming Roller for Milling Steel Tube[J];Heat Treatment of Metals;2006-08
8 GAO Zhong-yong,JIN Long,CHEN Bai-jiang,XU Yu(Guangxi University of Technology Department of Mechanical Engineering,Liuzhou 545006,China);Calculation and Analysis of Hertz Stress of the Helical Gearing[J];Machine Design & Research;2010-05
9 Zhu Rongsheng,Wang Xiuli,Cao Xinzhi,Yan Hao,Hu Zhiqiang;Using Plastic-steel Gear-driven Device in Nuclear Power Plant Drum-like Rotating Filter Net[J];Journal of Mechanical Transmission;2009-04
10 HU Yuanzhe College of Science,Xi'an University of Science and Technology,Xi'an,Shaanxi 710054,China;Failure analysis of chute abrasion in scraper conveyor and anti-wear measures[J];Mining & Processing Equipment;2009-01
【Secondary Citations】
Chinese Journal Full-text Database 10 Hits
1 Yang Shi-jun,Yao Wen-xi(Beijing institute of mechanical,department of mechanical engineering, Beijing 100085,China);Comparing about structure and efficiency between CASE 8545 and Welger AP-530 of baler[J];Mechanical Research & Application;2006-01
2 SU Gang1, SHI Jian-xin1, CHENG Xin-ping2 (1.Mechanical & Traffic College of Xinjiang Agricultural University, Urumqi 830052, China; 2.Xinjiang Keli Advanced Manufacturing Technology Co., Ltd, Urumqi 830000, China);Application of Reverse Engineering in Designing Knotter of Rectangular Baler[J];Journal of Agricultural Mechanization Research;2006-07
3 Yang Baocheng,Yang Haipeng(College of Mechanical and Electrical Engineering,Xuchang Vocational Technical College,Xuchang 461000,China);Research on 9YKS-0.9(1.5) Fangcaokun-harvest Stubble Baler Machine[J];Journal of Agricultural Mechanization Research;2009-08
4 Wan Qihao1,Bu Ku1,Zhang Guorui2(1.Grassland Research Institute Chinese Academy of Agriculture Science,Huhhot 010010,China;2.Inner Mongolia Machine Electricity Occupation Technical College,Huhhot 010054,China);The Movement Analysis of Twine Knotter Control System Based on the Rectangular Baler[J];Journal of Agricultural Mechanization Research;2009-09
5 Wang Gehua,Tian Yalin(Institute of Nuclear and New Energy Technology of Tsinghua University,Beijing 100084,China);New village and biomass energy development strategy[J];Transactions of the Chinese Society of Agricultural Engineering;2006-S1
6 Wang Defu1,2,Zhang Quanguo1※ (1.College of Mechanical and Electrical Engineering,Henan Agricultural University,Zhengzhou 450002,China;2.College of Engineering,Northeast Agricultural University,Harbin 150030,China);Improvement of round baler for rice straw ensiling[J];Transactions of the Chinese Society of Agricultural Engineering;2007-11
7 Li Ming1, Dai Sihui2, Tang Chuzhou1, Xiang Yang1 (1. College of Engineering and Technology, Hunan Agricultural University, Changsha 410128, China; 2. College of Horticulture and Landscape, Hunan Agricultural University, Changsha 410128, China);Simulation test on plantlet-cutting mechanism of grafting robot[J];Transactions of the Chinese Society of Agricultural Engineering;2008-06
8 Wu Mingliang 1 ,Guan Chunyun 2 ,Tang Chuzhou 1 ,Chen Sheyuan 2 ,Luo Haifeng 1 ,Xie Fangping 1 (1.College of Engineering,Hunan Agricultural University,Changsha 410128,China; 2.Institute of Oil,Hunan Agricultural University,Changsha 410128,China);Experiments on influencing factors of cutting force of rape stem[J];Transactions of the Chinese Society of Agricultural Engineering;2009-06
9 Li Hui 1,Li Hongwen 1,He Jin 1,Wang Qingjie 1,Wu Hongdan 1,He Qing 2(1.College of Engineering,China Agricultural University,Beijing 100083,China 2.Collaboration Center,State Intellectual Property Office,Beijing 100190,China);Reconstruction and optimal design of driving dentate disc of D-bale knotter based on reverse engineering[J];Transactions of the Chinese Society of Agricultural Engineering;2010-05
10 Wang Guoquan Yu Qun(China Agricultural University)\ Bu Yunlong Yu Denian(Beijing Agricultural Machinery Research Institute) Wang Caimei(Beijing Baimtec Material Co. Ltd);Design of Pickup Baler and Dynamic Simulation of Pickup Roller[J];Transactions of The Chinese Society of Agricultural Machinery;2001-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved