Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Gases Separation》 2004-05
Add to Favorite Get Latest Update

Solving problems of 8105M type oil systems using in the air separation equipments

Technique Center, Xingtai Iron and Steel Co.,Ltd  
Based on problems that oil pumps of 8105 M type oil systems leak oil using in the air separation equipments of Xingtai Iron and Steel Co.,Ltd, and reasonably designimg structure of seal, and making use of dry nitrogen that the oxygen factory produce by itself,and designed a gas driving equipment of recovering oil fog that had replaced the electric power drive machine of taking out oil fog,and enormously Reducing oil fog exhausted, And Provided the problem-solving method for other type oil systems Exsiting same problem,guaranteed the safe movement of the equipments.
【CateGory Index】: TQ116.11
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 Yu Hongbin (Jinhua College of Profession & Technology,Jinhua 321017,China);ENERGY-SAVING ANALYSIS AND APPLICATION OF FREQUENCY INVERTER IN SPEED REGULATION FOR INJECTION MOULDING SYSTEM[J];Engineering Plastics Application;2007-07
2 Xu Yan (The Mechanical Equipment Engineering Co.of Angang Subsidary) Sun Shihui Li Jihong (Angang Design and Research Institute);Design and Research of Lifting and Rotating Devices for Lance[J];;2002-05
3 Liu Baoquan~1 Li Jiye~2(1.Cold Rolling Plant of Angang New Steel Co.,Ltd.2.Anshan Iron and Steel(Group) Co.);Dynamic Simulation for Hydraulic AGC System of Cold Rolling Mill[J];Angang Technology;2006-02
4 ZHANG Jin-ying,ZHOU Ming-lian (School of Mechanical,Electronic and Control Engineering,Beijing Jiaotong University,Beijing 100044,China);Modeling and Experimental of the Pneumatic Gear Motor[J];Journal of Beijing Jiaotong University;2006-01
5 TAO Wei-ying (Baotou Iron & Steel Engineering and Research Institute, Baotou 014010, China);Design and calculation of SWIDEN lever[J];Science & Technology of Baotou Steel(Group) Corporation;2001-02
6 HUANG Yu (Design Institute of Baotou Steel (Group) Corporation, Baotou 014010, China);Dredger analysis at 8# pumping station modification[J];Science & Technology of Baotou Steel(Group) Corporation;2001-04
7 LIU Xiao - xing, WANG Jian - jun, ZHANG Chang - jing( Equipment and Spare parts Supply Company of Baotou Steel ( Group) Corporation , Baotou 014010,NeiMonggol, China; Baotou Tiancheng Steel Wires Co. Ltd. , Baotou 014010, Nei Monggol, China);Regulating method of contact spots of spiral cone gears[J];Science & Technology of Baotou Steel(Group) Corporation;2004-06
8 LUO Wen-guo(Baotou Engineering and Research Corp. of Iron and Steel Industry,Baotou 014010,Nei Monggol.China);Technical features of design and equipment involved in the raw materials handling system for No. 4 blast furnace in Baotou Steel (Group) Corporation[J];Science & Technology of Baotou Steel(Group) Corporation;2005-01
9 LIAN Jin-hua1, HE yong2, WANG Guang-sheng2(1. Design and Research Institute of Baotou Steel (Group) Corporation, Baotou 014010, Nei Monggol, China; 2. Steel Bars of Steel Union of Baotou Steel (Group) Corporation, Baotou 014010, Nei Monggol, China);Technical modification of justification roller and moving system of steel bars[J];Science & Technology of Baotou Steel(Group) Corporation;2005-01
10 LI Sheng-liang, WANG Qing, WAN Chen(Electric Equipment Co. Ltd. of Baotou Steel (Group) Corporation, Baotou 014010, Nei Monggol, China);Solution of the over-hot of 4200kW direct current electric motor' sliding bearing[J];Science & Technology of Baotou Steel(Group) Corporation;2005-01
China Proceedings of conference Full-text Database 10 Hits
1 DING Chen (The Equipment Maintenance Plant of WISCO,Wuhan 430083,Hubei,China);The Temperature Solutions to the Hydraulic System in Sliding Gate of the Continuous Casting[A];[C];2011
2 An Gaocheng1,2 Chen Shuangqiao3 Fu Yongling2 Wang Mingzhi1 (1 TaiYuan University of T Science and Technology,Taiyuan 030024 2 Naval University of Enineering,Wuhan, 430033 3 Beihang University, Beijing 100083);The Research on Electric-hudraulic Proportional Pressure Control Radial Piston Pump Based on Displacement Control[A];[C];2008
3 Ye Pengfei Guo Yong Wang Yonggang Yuan Yanping (College of Mechanical and Electrical Engineering, Central South University , Changsha 410083);STUDY ON SIMULATION ANALYSIS OF A KIND OF 3 POSITION 6 PORT HYDRAULIC VALVE[A];[C];2008
4 ZHENG Pei-gen TAO Guo-liang(State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027,China);Research on Performance Measurement System for Pneumatic Solenoid Valve[A];[C];2010
5 Zhu hui yi~1,zhou yi~1,Cheng wen sheng~2 (1 College of Mechanical Engineering,Chongqing University,Chongqing400030 2Chongqing Hydraulic and electrical Ltd of CSSC,Chongqing402160);Analyzing and optimizing of dynamic characteristic for high power-density steering gear[A];[C];2010
6 Shi Qin Xiong Wei (Nanjing Research Institute of Electronics Technology ,Nanjing 210013,China);The Automatic Leveling by one-button and the Solution to the Weak Support Problem[A];[C];2009
7 Zhang Xiao gong (DongFeng Automobile Corporation);A New Concept Internal Combustion Engine——Reciprocating Piston Type Franck Shaft Internal Combustion Engine[A];[C];2006
8 Shun Xian Zhu JiaoJianHua Zhang Wen Wu QIQIHAR HEAVY CNC EQUIPMENT CORPORATION LIMITED;Improve for Rail Head Unload Device of Vertical Lathe[A];[C];2007
9 Shao Qing yuan;The Hydraulic System Analyse and Improvement of Walking Beam Furnace[A];[C];2009
10 Shen Shou-rong Wang Yong-qin Yan Xing-chun (School of Machine Engineering,Chongqing University,Chongqing 400044,China);Finite Element Analysis Modeling Method Of Rolling-machine Axis Intensity Analysis[A];[C];2004
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved