Full-Text Search:
Home|Journal Papers|About CNKI|User Service|FAQ|Contact Us|中文
《Journal of Synthetic Crystals》 2006-06
Add to Favorite Get Latest Update

Application and Ultraprecision Machining Technology of MgO Single Crystal

DONG Zhi-gang~1,KANG Ren-ke~1,JIN Zhu-ji~1,WANG Ning-hui~2(1.Key Laboratory of Precision and Non-traditional Machining of Ministry of Education,Dalian University of Technology,Dalian 116024,China; 2.Institute of Electrostatics and Special Power Supply,Dalian University of Technology,Dalian 116024,China)  
MgO single crystal has been widely used as optical part and film substrate material in the field of high temperature superconductor,aerospace and photoelectron fields owing to its excellent optical,physical and chemical properties.The surface of substrate for films deposition is required to be high precision,ultra smooth and non-destructive.However,MgO single crystal is hard,brittle and easy to cleavage material,it is necessary to investigate advanced machining technology of MgO single crystal substrate.In this paper,the present precision machining technologies of MgO substrate are discussed,and advanced precision and ultraprecision machining technologies are presented.
【Fund】: 国家自然科学基金(No.50475149);; 教育部科技研究重点项目(No.105053);; 辽宁省科技计划项目(No.2004222001)资助
【CateGory Index】: O786
Download(CAJ format) Download(PDF format)
CAJViewer7.0 supports all the CNKI file formats; AdobeReader only supports the PDF format.
【References】
Chinese Journal Full-text Database 1 Hits
1 WANG Zhen,WANG Ning-hui,LI Tie School of Electrical Engineering,Dalian University of Technology,Dalian 116024,China;Analyses of fluid flow and heat transfer of arc plasma in DC submerged-arc furnace[J];Journal of Dalian University of Technology;2012-04
【Citations】
Chinese Journal Full-text Database 3 Hits
1 Wang Lan Lu Jiacheng Zhou Zhijie Liu Yayan Hao Xian Guo Hongxia (Changchun Institute of Applied Chemistry,Chinese Academy of Sciences,Changchun 130022);Study on Preparation of Large-Scale MgO Single Crystal with Boron Mud and Its Characteristics[J];Bulletin of Thechinese Ceramic Society;2002-06
2 Lin Kang (Researth Institute of Synthetic Crystals, State Administration of Buiding Materiats);MgO SINGLE CRYSTAL[J];Journal of The Chinese Ceramic Society;1990-02
3 Kang Renke Tian Yebing Guo Dongming Jin Zhuji (Institute of Advanced Manufacturing Technology, School of Mechanical Engineering, Dalian University of Technology, Dalian 116024, China);PRESENT STATUS OF RESEARCH AND APPLICATION IN ULTRA-PRECISION GRINDING TECHNOLOGY OF LARGE-SCALE SILICON WAFERS[J];Diamond & Abrasives Engineering;2003-04
【Co-citations】
Chinese Journal Full-text Database 10 Hits
1 KANG Ren-ke,GUO Dong-ming, HUO Feng-wei, JIN Zhu-ji(School of mechanical engineering, Dalian University of Technology, Dalian,116024 China);Application and evolution of back grinding technology for large size wafer[J];Semiconductor Technology;2003-09
2 LUO Yu-qing,KANG Ren-ke,GUO Dong-ming,JIN Zhu-ji(School of Mechanical Engineering,University of Dalian Technology,Dalian 116024,China);Application and research of endpoint-detection technology for chemical mechanical polishing of large size wafer[J];Semiconductor Technology;2004-06
3 LI Bing,GUO Xia,LIU Ying,LI Bing-chen,WANG Dong-feng,SHEN Guang-di (Beijing Optoelectronic Technology Lab., Beijing University of Technology, Beijing 100022, China);Study on the Back Lapping and Polishing of Sapphire-Based LED Epitaxial Wafers[J];Semiconductor Technology;2005-09
4 Gao Wei1,Zhang Yinxia1,Kang Renke2 (1.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China;2.Key Laboratory for Precision & Non-Traditional Machining of Ministry of Education,Dalian University of Technology,Dalian 116024,China);Study on the SSD Distribution of Large Size Si Wafer Rotational Ground Surface[J];Semiconductor Technology;2008-10
5 Zhao Quan,Yang Hongxing,Liu Chunxiang,Lü Fei,Zhang Weicai,Wang Yunbiao(The 46th Research Institute,CETC,Tianjin 300220,China);Control Technique for Mechanical Strength of Ultrathin Polished Ge Wafer[J];Semiconductor Technology;2010-08
6 Zhang Yinxia1,,Gao Wei1,Kang Renke2,and Guo Dongming2(1 School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China)(2 Key Laboratory of Precision & Non-Traditional Machining of the Ministry of Education,Dalian University of Technology,Dalian 116024,China);TEM Observation on the Ground Damage of Monocrystalline Silicon Wafers[J];Journal of Semiconductors;2008-08
7 SHANG Chun-min,ZHANG Dong-mei,YANG Jian-dong,FAN Jing-feng (College of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun 130022,Jilin,China);Research on Modeling and Experiment of Ellipsoidal Surface Lapping Tool Using Bend Forming Method[J];Acta Armamentarii;2009-01
8 MA Wen-lai1,XING Lin-lin1,XUE Hong-fang2 (1.Flying College,Binzhou University,Binzhou 256603,China;2.Department of Computer Science and Technology,Binzhou University,Binzhou 256603,China);The Development and Prospect of Control Technology of Electric Melting Furnace for Magnesia[J];Journal of Binzhou University;2007-06
9 JIA Xiong-wei,YANG Jian-dong,HAN Hui-ling(College of Mechanical and Electric Engineering,Changchun University of Science and Technology,Changchun 130022,China);Research on wear rule of abrasive lapping paraboloid workpiece based on bending formation method[J];Journal of Changchun University;2010-08
10 ZENG Bo,YANG Jian-dong(School of Mechanical and Electrical Engineering,Changchun University of Science and Technology,Changchun 130022,China);An analysis on the factors influencing the accuracy of paraboloid processing with the method of lapping tool bending deformation[J];Journal of Changchun University;2011-04
China Proceedings of conference Full-text Database 6 Hits
1 NIU Xin-huan,WANG Sheng-li,TAN Bai-mei,LIU Yu-ling (School of Information Engineering, Hebei University of Technology, Tianj in 300130,China);Influence of pH value on the removal rate of ULSI silicon substrate[A];[C];2006
2 Zong jun,Yang lian-long (East China Normal University,Shanghai Zhentai Chemical Company);Appliance of Nano-magnesia on Oriented Silicon Steel Sheet(Hi-B)Produced by Low Temperature Slab Heating[A];[C];2010
3 Tian Yebing, Quo Dongming, Kang Renke, Jin Zhuji Key Laboratory for Dalian University of Technology Precision & Non-traditional Machining of Ministry of Education, Dalian 116024, P. R. China;Experimental investigation on grinding of large scale wafer on a wafer rotation grinding machine[A];[C];2004
4 Ning Zhiqiang,Zhai Yuchun~*,Duan Huamei(School of Materials & Metallurgy,Northeastern University,Shenyang 110004,China);Study on the Dehydrate Kinetics of Bitter Salt 7-Hydrate[A];[C];2010
5 Liang Ning,Ding Hao (School of Materials Science and Technology,China University of Geosciences,Beijing 100083);Research Overview and Trends of the Processing Technology on Magnesium Hydroxide Flame Retardant in China[A];[C];2009
6 WANG Fang1,2,HUI Chang-shun1,2,LIU Tao1,2,JIN Yu-zhu1,2(1.Tianjin Jinhang Institute of Technical Physics,Tianjin 300192,China;2.Tianjin Key Laboratory of Optical Thin Film,Tianjin 300192,China);Process improvement for sapphire plane components[A];[C];2009
【Co-references】
Chinese Journal Full-text Database 10 Hits
1 YING Yan-ping,LUO Qing-yuan,YANG Xiao-bo (Chongqing Optoelectronics Research Institute,Chongqing 400060,China);Non-destructive Inspection System for Characterization of Mirror-like Surfaces[J];Semiconductor Optoelectronics;2000-06
2 SU Jian-xiu, KANG Ren-ke, GUO Dong-ming(School of Mechanical Engineering, University of Dalian Technology, Dalian 116024,China);Technology analysis of wafer chemical mechanical polishing in the manufacture of ULSI[J];Semiconductor Technology;2003-10
3 Gao Wei1,Zhang Yinxia1,Kang Renke2 (1.School of Mechanical Engineering,Zhengzhou University,Zhengzhou 450001,China;2.Key Laboratory for Precision & Non-Traditional Machining of Ministry of Education,Dalian University of Technology,Dalian 116024,China);Study on the SSD Distribution of Large Size Si Wafer Rotational Ground Surface[J];Semiconductor Technology;2008-10
4 Jiang Ruisheng(Luoyang Silicon Factory,Luoyang 471009);Chemical Mechanical Polishing of Multilayer Structures in IC Manufacturing[J];SEMICONDUCTOR TECHNOLOGY;1998-01
5 Wang Hongying,Liu Yuling and Zhang Dechen(Institute of Microelectronics Hebei University of Technology,Tianjin 300130,China);A New Type of Copper CMP Slurry in ULSI[J];Chinese Journal of Semiconductors;2002-02
6 Bu Junpeng,Zheng Hongjun,Zhao Ji,Zhu Ronghui and Yin YuhuaReceived 16 April 2002,revised manuscript received 24 June 2002○c 2003 The Chinese Institute of Electronics(Institute of Semiconductors,The Chinese Academy of Sciences,Beijing 100083);Polishing of Super-Low Sub-Surface Damage of GaAs Wafer[J];Chinese Journal of Semiconductors;2003-04
7 Su Jianxiu 1,2 ,Guo Dongming 1,Kang Renke 1,Jin Zhuji 1,and Li Xiujuan 1(1 Key Laboratory for Precision and Non Traditional Machining Technology of Ministry of Education, Dalian University of Technology,Dalian 116024,China) (2 Henan Institute of Science & Technology,Xinxiang 453003,China);Kinematic Mechanism of Chemical Mechanical Polishing in ULSI Manufacturing [J];Chinese Journal of Semiconductors;2005-03
8 Li Xing (Tianjin Vocational and Technical Techer's Training Institute, 300222);CMP Grows in Sophistication[J];;1999-03
9 ZHANG liang,LI jianli,WEI dong,LIU jinghe(College of Materials and Chemical Engineering,Changchun University of Science and Technology , Changchun 130022;P.R China);Study on Processing Technology of ZnSe Crystal[J];Journal of Changchun Institute of Optics and Fine Mechanics;2003-04
10 WANG Yue (Luoyang Ship Material Research Institute, Luoyang 471039, China);Application of High Tc Superconducting Material in Ship[J];Development and Application of Materials;2005-02
【Secondary References】
Chinese Journal Full-text Database 1 Hits
1 SUN Ya-juan;WANG Hua;L Guo-qiang;Faculty of Metallurgy and Energy,Kunming University of Science and Technology;State Key Laboratory of Complex Nonferrous Metal Resources Clean Utilization;;Numerical Simulation of DC Arc Influence on Heat Transfer in Industrial Silicon Submerged Arc Furnace[J];Journal of Materials Science and Engineering;2014-05
©2006 Tsinghua Tongfang Knowledge Network Technology Co., Ltd.(Beijing)(TTKN) All rights reserved